Telephone: 022-5900  2803
  • Company news
    • Release Time: 2020 - 05 - 27
      Application of 3D scanner in formula racingA racing car built with a common formula (regular restrictions) is a formula car, and the race is a formula car race. The racing car must be manufactured in accordance with the procedures stipulated by the International Automobile Federation's vehicle technical rules, including body structure, length and width, minimum weight, engine working volume, number of cylinders, fuel tank capacity, electronic equipment, tire distance and size, etc.At the beginning of motorsports, there were no restrictions on racing vehicles, and then it was in fairness and safety. It began to try to classify and restrict racing vehicles. Finally, there was a restriction standard for all participating vehicles. The design and manufacture of the program, including body size...
    • Release Time: 2019 - 06 - 18
      Improving and improving a country's energy structure and completing a country's new energy construction more quickly and efficiently is a major event that many countries are now implementing closely. The development of solar energy, around solar energy applications, humans have thought of many ways. In China, researchers are creating an artificial sun.In the circulating 2M installation, the researcher of the “vacuum chamber” technology of the Southwest Institute of Physics of the Nuclear Group Nuclear Industry, Yu Hong is the chief designer of the most important equipment “vacuum chamber” of the circulating 2M installation. A vacuum chamber inside a car tire liner is like a space capsule. This is where the nuclear fusion reaction takes place. In the future, it will reach an ultra-high vacu...
    • Release Time: 2016 - 07 - 22
      With the development of science and technology and industrial production, more and more fields have put forward the requirement of 3D measurement of workpiece size and shape parameters. Currently on the market has successfully developed three-dimensional scanner measurement instruments, such as three-dimensional scanner in the measurement range, measurement accuracy and measurement speed and other aspects than the traditional measuring instruments. Domestic industrial products to be exported to foreign countries, the need for three-dimensional detection of comparative analysis of the report, the current industrial exports are basically the use of three-dimensional scanner to do testing.Impeller three-dimensional detection schemeThree dimensional detection schemeThe export of industrial pla...
    • Release Time: 2016 - 09 - 03
      Huaguang 3D -3DP 3D photogrammetry system is based on the high resolution of a hand-held digital camera (4288 x 2848), the object to be measured by shooting digital photos, 2D digital photo image superposition, to obtain the 3D coordinate of the measured object, and the mobile technology to capturing 3D coordinates, quality control the analyte (Inspection) and variant analysis (Deformation) can effectively save time. Prior to the beginning of the measurement, the first object is attached to the code point, and then use the camera to shoot. During the shoot, take many different angle images, these images will be read to Huaguang 3D 3DP software, because each image of the shooting angle, each image from different angles, through triangulation, Huaguang 3D 3DP software will automatically comb...
    • Release Time: 2016 - 08 - 18
      "Using the latest remote sensing technology to achieve full coverage, closely monitoring the movements of geological disasters". Recently, the international famous journals published the results of the study of the China University of Geosciences - "integrated multi remote sensing technology to monitor the overall structure of the landslide and the latest progress", has aroused widespread concern in the international.According to reports, China is a geological disaster occurred frequently and the disaster loss is very serious, landslide, collapse, debris flow disaster almost throughout the provinces in mountainous and hilly areas, the activity area of about 45% of the total land area. The key of the management and prediction of geological disaster is to carry on the lon...
  • Industry news
    • Release Time: 2020 - 05 - 23
      For the first time China has reached world advanced status, it is necessary to pay tribute to one personAffected by the epidemic, the US military used 3D technology to make masks in order to alleviate the shortage of masks. Although efficiency should not be. But it also made everyone interested in this 'magic' technology. Put powdered raw materials in the printer, you can get toys, models, car parts, etc. Therefore, 3D printing technology is also called 'Promoting the realization of the fourth The Industrial Revolution'. In this neighborhood, China is the first in the world, and China has become the only country in the world that has mastered the manufacturing technology of large-scale main bearing components of laser-formed titanium alloy and put it into practical use.With 3D printing tec...
    • Release Time: 2016 - 08 - 08
      Mongolia's construction of a "Gen Gi Khan million guard" theme park, apply for the world cultural heritage, reproduction of Gen Gi Khan guards glory, different scanning position, different expressions of the giant statue of the cavalry cavalry, the statue is 3 meters high, nearly 4 meters long, by the Mongolian ancient famous artists hand carved, artificial carving the cavalry sculpture for 2 months, the customer needs to use the reverse design of a model of these statues, finally cast in bronze.Gen Gi Khan cavalry sculpture scanHuaguang 3D technology engineers use 3D Photogrammetry System 3DP+ 3D scanner alpha 7000, 3 meters high, with full scan nearly 4 meters long horse sculpture. The 3D Photogrammetry System 3DP+ 3D scanner alpha 7000 supporting the use of the cavalry sculptu...
    • Release Time: 2016 - 09 - 03
      At the beginning of June, the Russian computer vision company VisionLabs developed a common open source computer vision development platform, Facebook and Google to provide funds and test development results. In addition, in May, the U.S. Amazon Co acquired a European top machine vision team for the field of UAV research. Coincidentally, Intel's acquisition of the Russian company Itseez for computer vision, unmanned field.In recent years, foreign social class Internet Co in the machine vision industry layout is particularly rapid. Previously, Snapchat acquisition of computer vision company Seene; Pinterest acquisition of visual startups VisualGraph; Twitter acquisition based on depth study of computer vision startups Madbits.  At the beginning of June, the Russian computer vision...
    • Release Time: 2016 - 09 - 03
      Image recognition technology has already been applied to all aspects of the automotive field, from the license plate number recognition to the driver fatigue monitoring system using the image recognition technology. Recently in the automotive products and popular from the 3D gesture recognition technology, through the different gestures to achieve the operation of some of the functions of the car. The whole process of gestures like "very interesting, make groundless accusations". 3D gesture recognition technology is the basis of image scanning recognition technology.  3D gesture recognition technology principle is what?By using dynamic 3D scanning system 3D gesture recognition technology, innovation is equipped with its millions of pixel level capture instruments, billi...
    • Release Time: 2018 - 11 - 30
      Recently, researchers from the Institute of Automation of the Chinese Academy of Sciences published a paper on how to solve the problem of facial replacement in all postures, and proposed a real-time 3D solution.Facial alignment has become an important topic in the field of computer vision, which adapts facial models to images and extracts the semantics of facial pixels. Previously, most of the algorithms were designed for small and medium-sized faces (the deflection angle is less than 45 degrees), lacking the ability to align faces in large gestures up to 90 degrees. This paper is a method proposed for face replacement in all pose ranges.The improved version proposed by the doctoral student adds some extra work, including real-time training, training strategies, and so on, rather than jus...
  • Exhibition
    • Release Time: 2019 - 08 - 24
      2019 The 9th China Shanghai International Automotive Interior and Exterior Exhibition was grandly opened at the Shanghai New International Expo Center. The exhibition was held for three days on August 15-17, 2019. It covers an area of more than 40,000+ square meters and more than 35,000+ industry visitors, automotive engineers and professional related procurement personnel.Our booth mapThis exhibition is based on the theme of “car interior and exterior decoration”. Automotive industry robots and automation equipment, interior soft material cutting and cutting equipment, sewing equipment, interior parts molds and manufacturing technology, polyurethane equipment, door panel welding equipment, automotive plastics new technology and technology, ultrasonic equipment, assembly tools including an...
    • Release Time: 2019 - 05 - 07
      The 22nd North China International Intelligent Manufacturing Exhibition was grandly opened in Shenyang International Exhibition Center. The exhibition lasted for three days and was of great scale. Shenyang, the host city, is the central city of Northeast China, the transportation hub of Northeast China, and the material distribution center of China's important industrial base.On-site photographs of the exhibitionThe theme of this exhibition is a complete set of solutions for robotic application products and intelligent factories. For Hualang engineers and exhibitors (automotive assembly, automotive parts production, welding, 3C, integrated solutions for machine tool application industry, robotic workstation, robotic intelligent production line, etc.), the new three-dimensional scanner equi...
    • Release Time: 2019 - 05 - 05
      Recently, the 17th China (Guangzhou) International Auto Parts Exhibition/International Die Casting and Casting Exhibition was held in Pazhou International Purchasing Center of Guangzhou for three days. More than 500 exhibitors (from 20 countries and regions) are expected, and the number of exhibitors is estimated to be around 40,000 (from 31 countries and regions).On-site photography of the exhibitionThe theme of this exhibition is industrial design, aviation, navigation, new energy and other industries. Hualang three-dimensional engineer communicates face-to-face with each domestic and foreign purchasing decision-maker, introduces in detail the use of three-dimensional scanner and its application industry, and concludes transactions with intended customers to expand brand influence among ...
    • Release Time: 2019 - 04 - 29
      The 9th China Automobile Technology Exhibition and Automobile Inspection and Technology Exhibition opened in Chongqing International Exhibition Center. The exhibition lasts for three days, covering an area of 46,000_, with more than 700 exhibitors and a total of 35,000 participants.The theme of this exhibition is automotive front-loading industry technology. Special theme area of automobile testing and testing technology is designed to systematically display the latest testing, testing, development and validation technologies for the whole vehicle and parts, providing innovative solutions for the continuous improvement of safety, reliability, durability and high quality in automobile manufacturing industry.On-site photographs of the exhibitionHualang three-dimensional technicians displayed...
    • Release Time: 2019 - 04 - 28
      The three-day China 3D Printing Technology and Equipment Fair, which opened in Xi'an Convention and Exhibition Center on March 14, is mainly about industrial design, machinery manufacturing, aerospace, jewelry manufacturing, model making, fashion, film, architecture, creative design and other 10 different industries and fields.It is a perfect combination of traditional manufacturing technology and new materials, creating an interactive platform of exhibition, communication, cooperation and trade for the majority of manufacturers and users.Headquarters Hualang 3-D portable Drake wireless 3-D scanner, 15-line (red/blue) hand-held laser 3-D scanner HOLON760 and HL-SCAN optical tracking 3-D scanner, photographic 3-D scanner and other equipment participated in the exhibition. Headquarters Huala...
  • Camera 3D scanner
    • Release Time: 2016 - 09 - 14
      Product technology introductionHuaguang Photographic 3D Scanner has a number of patented technologies, adopting new coding calibration technology (leading technology, synchronizing advanced gom advanced technology), which is the core of 3D photogrammetry technology and application, reducing physical distortion and improving the original 3D data scanning accuracy. The heterodyne multi-frequency phase shift grating technique is used to improve the quality of the scanning point cloud. Synchronized with the German gom company, it has a Blu-ray device scanning system, and the camera-type 3D scanner scans data points up to 0.01mm, which is suitable for fine workpiece scanning. The new core design concept uses carbon fiber materials to improve the stability of the product during operation. Α7000 technical features1, super high efficiency: a car scan ≤ 2 hours2, cost-effective: no photogrammetry cooperation, can complete large-scale measurement3, high stability: the use of carbon fiber pa...
    • Release Time: 2016 - 07 - 27
      Product technology introductionCO3D camera-type 3D scanner has a number of patented technologies, using a new code calibration technology, which is the core of 3D photogrammetry technology, and reduces the physical distortion to improve the original 3D data scanning accuracy. The heterodyne multi-frequency phase shift grating technique is used to improve the quality of the scanning point cloud. Synchronized with German gom company, it has a Blu-ray device scanning system, and the camera-type 3D scanner scans data points up to 0.01mm, which is suitable for fine workpiece scanning. It adopts international new core design concept and applies carbon fiber materials to improve product stability. Sex. 3D scanner HL-3DS technical features:1.13 step code calibration technology: eliminate lens distortion error and improve scanning accuracy2. Heterodyne multi-frequency phase shift grating: uniform fringe projection, point cloud data accuracy, no noise data3. Portable design: the hardware sy...
    • Release Time: 2016 - 07 - 25
      Introduction to product technologyShape moving picture type 3 d scanner has a number of patented technology, using the latest international code calibration technology (leading domestic, the synchronization of the international advanced technology, the technology is the core of the technology of three-dimensional photogrammetry mastery and application of reducing physical distortion the original 3 d scanning data precision is improved. In this paper, the technology of multi-frequency phase shift with heterodyne method is used to improve the quality of scanning point cloud. In sync with gom in Germany, the scanning system of blue light device is true, and the scanning data point of 3d scanner can reach 0.01 mm, which is suitable for fine workpiece scanning. Adopt the new international core design concept, apply carbon fiber material, improve the stability of the product work.  Features of 3d scanner hl-3dm technology: 1. High-precision motherboard data: using German ...
    • Release Time: 2016 - 07 - 27
      Product technology introduction:The shape-moving photo-type 3D scanner has a number of patented technologies and adopts a new code calibration technology. This technology is the core of the 3D photogrammetry technology and its application. The reduction of physical distortion improves the accuracy of the original 3D data scanning. The heterodyne multi-frequency phase shift grating technique is used to improve the quality of the scanning point cloud. Synchronized with the German gom company, it has a Blu-ray device scanning system, and the camera-type 3D scanner scans data points up to 0.01mm, which is suitable for fine workpiece scanning. The new core design concept uses carbon fiber materials to improve the stability of the product during operation. Industrial grade 3D scanner HL-3DX technical features:1, the product has a long service life, up to 35,000 hours2, hardware stability, system size is small (360 × 120 × 120mm), easy to disassemble, easy to bring to the measu...
    • Release Time: 2016 - 09 - 14
      Product technology introduction: Shape moving picture type 3 d scanner has a number of patented technology, using the latest international code calibration technology (technique of synchronous leading domestic, international advanced), the technology is the core of the technology of three-dimensional photogrammetry mastery and application of reducing physical distortion the original 3 d scanning data precision is improved. In this paper, the technology of multi-frequency phase shift with heterodyne method is used to improve the quality of scanning point cloud. In sync with gom in Germany, the scanning system of blue light device is true, and the scanning data point of 3d scanner can reach 0.01 mm, which is suitable for fine workpiece scanning. Adopt the new international core design concept, apply carbon fiber material, improve the stability of the product work. Industrial grade 3d scanner hl-3dx + technical features: 1. Long service life, up to 35,000 hours 2. Hard...
  • Handheld 3D scanner
    • Release Time: 2018 - 11 - 22
      Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, the shape of mobile handheld 3D laser scanner technology, has been widely used in reverse engineering and 3D inspection. The product uses a new hand-held design, light weight (870g), easy to carry; ready to use; high work efficiency, flexible scanning solution according to user needs, can cooperate with our 3D photogrammetry system when scanning large workpieces (HL -3DP) Eliminates accumulated errors and improves global scanning accuracy of large workpieces. Using 14+1 red laser lines, dual industrial cameras, automatic point stitching technology and scanning software, support photogrammetry and self-calibration technology. It is especially suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. The operation process is flexible and convenient, and it is suitable for various complicated application scenarios. HOLON760 Technical F...
    • Release Time: 2018 - 11 - 22
      Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, the shape of mobile handheld 3D laser scanner technology, has been widely used in reverse engineering and 3D inspection. The product uses a new hand-held design, light weight (870g), easy to carry; ready to use; high work efficiency, flexible scanning solution according to user needs, can cooperate with our 3D photogrammetry system when scanning large workpieces (HL -3DP) Eliminates accumulated errors and improves global scanning accuracy of large workpieces. Using 6+1 red laser lines, dual industrial cameras, automatic point stitching technology and scanning software, support photogrammetry system. It is suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. The operation process is flexible and convenient, and it is suitable for various complicated application scenarios. HOLON380 Technical Features1. Light source form: 3 sets o...
    • Release Time: 2019 - 07 - 04
      Product technology introductionCalibry handheld 3D scanner is lightweight and easy to carry, with fast scanning speed, 30 frames per second, up to 3 million points per second, wide scanning range, powerful development software, specially configured camera, three tracking modes. Breaking through the limitations of scanning objects that are too small, smooth and difficult to scan or require surface treatment, it is easy to scan sharp edges, black and shiny objects, almost unlimited object size, can scan any object, it is very convenient, high efficiency, high A precise scanner.Calibry Technical Features1. Small size (0.7kg), light and portable, hand-held and ready to use, easy to operate.2, built-in computer, scan data real-time display.3, the scanning speed is fast, can be quickly captured, 30 frames per second, up to 3 million points per second.4, can scan any object, fur and hair can be easily scanned out, black and shiny objects can be quickly scanned without surface treatment, savin...
    • Release Time: 2018 - 11 - 22
      Product technology introductionMy company X3DS The latest development of X-scan multi-function handheld color 3D scanner, using the latest handheld design, light weight, easy to carry; ready to use; dual industrial camera, can quickly capture 3D data of real objects, no need to paste, spray Powder processing is truly intelligent, portable, high-precision, non-contact color scanning, etc. This product has been widely used in reverse engineering and color cultural relics, 3D printing, education and scientific research.X-Scan technical features   1. Various scanning modes: support both handheld and fixed scanning modes;2, real-time color scanning rendering, high color reproduction;3, plug and play system, convenient for quick installation and use;4, no need to paste, dusting, automatic splicing, especially for human and cultural antiques scanning.5, with light weight, flexible carrying, easy to operate, etc. can be used in a variety of complex scenes6, the equipment is...
    • Release Time: 2018 - 12 - 22
      Product technology introduction       Drake handheld 3D scanner is the most comprehensive portable wireless 3D scanner on the market today. The three modes of the three groups of lenses can be switched according to the size of the workpiece to be used for scanning different types of objects. Coins and airplanes can be easily completed. It is a simple, portable and high-precision multi-mode handheld wireless 3D scanner.1. Small size and light weight (2.3kg), easy to carry and use;2, out of the box, no need to connect the data line and power line, truly achieve wireless 3D scanning;3, built-in computer and large-capacity battery (can work for 1.5 hours without interruption), touch screen real-time synchronous display;4, scanning methods are diverse, to achieve paste and non-paste scanning, quickly obtain efficient and reliable 3D data acquisition;5, three modes flexible switching, small to coins, large to the aircraft yacht, can easily complete the work, fast (au...
  • Three dimensional Photogrammetry System
    • Release Time: 2016 - 07 - 27
      Introduction to product technology  Shape moving picture type 3 d scanner has a number of patented technology, using the latest international code calibration technology (technique of synchronous leading domestic, international advanced), the technology is the core of the technology of three-dimensional photogrammetry mastery and application of reducing physical distortion the original 3 d scanning data precision is improved. In this paper, the technology of multi-frequency phase shift with heterodyne method is used to improve the quality of scanning point cloud. In sync with gom in Germany, the scanning system of blue light device is true, and the scanning data point of 3d scanner can reach 0.01 mm, which is suitable for fine workpiece scanning. Adopt the new international core design concept, apply carbon fiber material, improve the stability of the product work. Product features 1. Aviation special anti-pressure instrument box, anti-collision design protection. &...
  • Big scene 3D scanner
    • Release Time: 2016 - 08 - 22
      Product Features | Product features.1.Anti-collisionIn high-value equipment such as port machinery / crane / special equipment / conveyor equipment and other fields.For high-value equipment, impacts often result in huge economic and personnel losses.Conventional single-point detection equipment such as photoelectric (including single-point laser), ultrasonic and other anti-collision schemes can only detect in the linear direction, and there are detection blind spots for irregular obstacles and corners.Laser scanning products enable surface inspection and scan areas in the direction of travel of the device for more reliable protection.2. DetectionIn the scanning range, different shapes of detection areas can be set, and when an object enters the area, a signal can be output through the I/O port.3. SecurityThe area can be protected by scanning the area. Laser scanning eliminates the need for additional light sources, is unaffected by ambient light, and is highly reliable.It can accuratel...
  • Color 3D scanner
    • Release Time: 2016 - 07 - 27
      Product technology introductionThe HL-3DC color 3D scanner uses advanced image texture analysis and acquisition technology to maintain true color display of the surface of the object while performing 3D data reconstruction. This technology completely preserves the true color of the measured object, and is very suitable for digital cultural relics, ancient building surveys, computer synthesis, games, virtual three-dimensional environment, three-dimensional digital product demonstration, archaeological and other occasions with high texture and color requirements. The 24-bit color point cloud data closely combines the object's three-dimensional data information with the surface texture information to maximize the true physical characteristics of the object.  Product numberHL-3DCSensor: resolution (pixels)1,300,000x3 (optional 2 million, 3 million, 5 million pixels)Single measurement accuracy (mm)≤±0.01mmSingle measurement time (S)≤3SMeasuring point distance (mm)0.07~0.47mmT...
  • 3D online inspection system
    • Release Time: 2018 - 12 - 10
      Huaguang HL-Scan three-dimensional scanning system can quickly complete three-dimensional detection and reverse engineering application of various size workpieces. It can automatically locate target points without arm or other tracking equipment. It can scan a cross laser beam plus an additional laser beam with a scanning speed of 480,000 measurements/seconds. It is a plug-and-play system, which can be installed and used quickly without layering point clouds. Automatically generate three-dimensional solid graphics (triangular mesh surface); hand-held arbitrary scanning, portable operation, wide scope of application, scanning in narrow space, no requirements for the working environment.Real-time interaction between multi-function keys and software17.6m3 super large workspace, expandable (dynamic coordinate system can be established)Ignore complex factors such as workshop vibrationNo fixed installation, easy operationIf you don't stick to the point, you can take it and sweep it.Real high...
    • Release Time: 2018 - 11 - 24
      Product technology introductionWith the rapid development of the field of 3D scanning, our company has accumulated nearly 20 years of technology to launch an automated 3D online inspection system. Through the installation of equipment directly on the production line, 3D software measurement technology is used for real-time detection and data feedback, so that the product can better produce guidance. Work, reduce unnecessary losses, save time and production costs, greatly improve production efficiency.HOLON760 Technical Features1. Operational performance safety: man-machine cooperation robot, no need for guardrail, easy to operate.     2. Fully automatic scanning: The whole process from 3D scanning to generating test report can be completed with one click.     3. High data accuracy: accuracy up to 0.015mm, strong resistance to environmental interference.     4. Blu-ray scanning technology: The three-dimensional online detection system adopts ...
  • Anthropometer
  • Desktop level 3D scanner
  • Video Center
  • Motion capture system
  • Automobile traffic
    • Release Time: 2020 - 04 - 14
      Three-dimensional inspection of high-speed rail sleepersHigh-speed sleepers must not only support the rail, but also maintain the position of the rail, and also transfer the huge pressure transmitted from the rail to the track bed, so they need to have certain flexibility and elasticity. . We are in control of manufacturing materials and production. Scan it with a 3D scanner to obtain data, detect and analyze where problems occur, and make adjustments to measures.High-speed rail sleeper scene scanPractical problemsScanned samples are bulky, bulky, have many surface details, and require high measurement accuracy. Scanned data should be tested and analyzedHigh-speed rail sleeper scene scanThe traditional measurement method is used for large workpieces. It takes a long time and requires a lot...
    • Release Time: 2020 - 04 - 02
      3D inspection of automobile cylinder headAs society enters industrialization, vehicle usage is getting higher and higher, so the requirements will be higher and higher. The cylinder head is often in contact with high-temperature and high-pressure gas, and therefore withstands large thermal and mechanical loads. The customer wants to scan and obtain the data, detect the quality of the produced automobile cylinder head, and distinguish the key parts of the automobile cylinder head from the defects of the product according to the high-density point cloud data to ensure that the product design fully complies with the processing logic.On-site scan of car cylinder headPractical problemsThere are many curved surfaces of automobile cylinder heads, and the shapes of the grooves on each side are dif...
    • Release Time: 2020 - 03 - 16
      3D scanning of auto partsWith the increasingly fierce market competition in the automotive industry, continuous independent development and innovation, as well as continuous upgrading and application of technology. As the foundation of the automobile industry, auto parts are factors that support the sustainable and healthy development of the automobile industry. Changes need to be made to adapt to modern development, improve the ability of independent innovation, shorten the development cycle, and provide high-quality production products. Customers found our company and used 3D scanning technology to scan their car parts and obtain data. I hope to complete the work in a short time, and the completion effect is good, the pursuit of high efficiency and quality.Auto parts scan scene mapPracti...
    • Release Time: 2020 - 03 - 13
      Auto stamping partsAutomotive stampings are metal stampings that make up automotive parts and can be directly turned into automotive parts. According to the types and characteristics of automotive stamping parts, different metal materials need to be selected for production to ensure product quality and save materials, and the process design reduces impact. An automobile customer needs to scan the stamping parts of automobile molds comprehensively, obtain the data to form an effect map, so as to facilitate the later production.Auto mold scan scenePractical problems1. Scanning automotive parts stamping parts provided by the customer has a complicated structure, many surface details and features, with holes, which brings certain difficulties to the scanning work as a whole.Auto mold scan scen...
    • Release Time: 2020 - 03 - 10
      Car steering wheel reverse scanThe steering wheel of a car is mainly used to control the direction. As a safety part, it plays a key role in the safety of vehicles and people. It is a very important part in a car. With the continuous development of automobiles, the steering wheel must also be improved to improve the safety performance of the car. The steering wheel is generally made of magnesium aluminum alloy, which is light in weight, easy to operate and has good performance indicators. Automobile manufacturers want to research and develop cars, so they use 3D scanning technology to improve steering wheel scanning.Car steering wheel live shotPractical problemsThe steering wheel of a car contains a turntable and a joystick. Generally speaking, the shape is more complicated and irregular, ...
  • Aerospace
    • Release Time: 2020 - 05 - 07
      Reverse design of aircraft tailThe tail wing is a device installed at the tail of the aircraft, which can enhance the stability of flight. The tail can be used to control the pitch, yaw and tilt of the aircraft to change its flight attitude. The tail is an important part of the flight control system. It is inevitable that damage will occur during use, so it is necessary to quickly obtain the appearance data of the aircraft tail wing to provide accurate data solutions for later maintenance, repair and transformation.Real shot of the aircraft scenePractical problemsThe customer mainly wants to obtain the data of the aircraft tail, and reverse modeling is performed later. Since the traditional scanning method collects large objects of the aircraft tail, it is impossible to obtain accurate dat...
    • Release Time: 2019 - 12 - 17
      3D scanning of aircraft bladesThe thrust of the engine's external letter comes entirely from the thrust generated by the blades. The quality of the blades directly affects the performance of the engine, so it is necessary to pay attention to the quality of the blades. A research institute wants to use 3D scanning technology to scan the produced blades comprehensively, acquire data, and use our equipment to find a fast and suitable solution, which can be used in later design modification operations to improve the quality of the blades and enhance Engine performance.Leaf scan scene mapPractical problemsFor customer needs, high-precision 3D scan data. The blade is made of titanium alloy, the surface is easy to reflect light, the appearance is complex, and dead angles are prone to occur betwee...
    • Release Time: 2016 - 07 - 22
      Three dimensional scanning case of air propellerHigh precision 3D model of a customer needs to get the air propeller, Huaguang engineers use the HL-3DS fast, accurate, obtain the 3D data of the air propeller, and a three-dimensional rendering of 1:1 model in reverse design software UG.Practical problems1 the propeller blade curvature changes, traditional measurement methods can not meet the measurement needs.The middle of the 2 aircraft propeller hub is connected with the blade axis precision parts of the engine, the customer requirements of data accuracy is very high.CO3D solutionAircraft propeller is to rely on the air in the propeller rotation will be the power of the engine to promote the power or lift the power of the device, its quality will determine the safety of the whole aircraft...
    • Release Time: 2013 - 11 - 30
      Reverse design of turbine blade in fighter jetGuizhou aircraft parts manufacturing enterprises to use 3D scanner to scan Huaguang wear aircraft turbine blade, the blade of turbine blade is the carrier to achieve energy conversion of the fuel gas in the primary factor in determining the performance of a turbine blade, aircraft design requirements are very high.Practical problems1 in view of the complexity of the blade edge curvature, the 3D scanner was used to detect the blade of the aircraft engine.2 the traditional method of measurement data acquisition density is insufficient, because the blade surface is irregular curved surface, and the scanning precision of 3D scanner is very high.CO3D solutionsTurbine blade structure design is complex, tedious process, to complete design of turbine b...
    • Release Time: 2013 - 11 - 30
      Helicopter accessories three dimensional detection caseUsing 3D Huaguang three-dimensional hand-held scanner HL-3DH-3M, and use Geomagic Qualify to analyze the helicopter parts 3D model and entity to obtain accurate reconstruction model. Thus improving the accuracy of product design, greatly shorten the product R & D design and processing cycle and reduce the cost.Practical problems1, the helicopter is very strict technical indicators of the project, the 3D data accuracy of the helicopter accessories is very high, the overall error control in the 0.02mm.2, the traditional method of measuring data acquisition density is not enough (data deficient) and for the helicopter parts surface and arc can not be measured, unable to detect late nor quality testing and design two times.CO3D solutio...
  • Heavy equipment manufacturing
    • Release Time: 2020 - 05 - 27
      Reverse design of agricultural machinery partsParts are parts or components assembled on machinery. Each part is an important part of machinery and equipment. The lack or wear will affect the use and performance of the product. During the use of machinery and equipment, especially agricultural machinery, the wear rate is fast during long-term labor. Therefore, it is necessary to obtain the data of the accessories, save the data and use it in reverse design, which can provide data support and reduce repair costs.Agricultural machinery scanning scenePractical problemsThe customer purchases agricultural machinery parts and wants to collect three-dimensional data, which can speed up repairs during the repair of parts wear. The shape of the accessories is irregular, the surface has many small f...
    • Release Time: 2020 - 01 - 02
      Three-dimensional inspection of steam turbineSteam turbines are the main equipment of modern thermal power plants. Rotary steam power plants are used in the metallurgical industry, chemical industry, ship power plants, staggered blade rotating rotors. The customer needs to scan the rotating blade rows of the steam turbine for a comparative analysis of the data. Our company's new handheld 3D scanner is used to fully scan a sample to obtain the required data and apply it to the work of a steam turbine to make a better device.Turbine blade scan sceneFacing problemsThe steam turbine has a large volume and a large shape, and the gap between the blade rows is small, which easily forms an included angle. Customers need high scanning data accuracy, good scanning technology, and can complete work i...
    • Release Time: 2019 - 09 - 11
      Three-dimensional inspection of wind turbine castingsWith the continuous improvement, many aspects need to be improved. Fans are prone to problems under rated conditions. It is necessary to produce and manufacture fans in strict accordance with product standards. In the later stage, proper maintenance and maintenance are required to improve the service life of the fans. Data detection of the fan.Fan casting real shot mapPractical problemsFan castings are bulky and cumbersome, unable to move, complex in structure, large in surface variation, uneven bumps around, and deep holes. On the whole, scanning is very difficult.Using the traditional scanning method and measuring instrument, the internal details of the casting can not be captured clearly, only the outer plane can be scanned, but the l...
    • Release Time: 2019 - 06 - 20
      3D inspection of super large rigid castingsThe vibrating screen equipment works by the reciprocating rotary vibration generated by the vibration of the vibrator, which produces the multi-spin type vibration of the screen surface. The work is complicated and demanding, and it is easy to wear. It requires daily maintenance and regular maintenance and overhaul to ensure production. The normal operation. A domestic customer needs to carry out three-dimensional inspection of the vibrating screen equipment. As the world's second largest casting, the vibrating screen is large and high. Scanning is a big project. After the customer has learned the data obtained by the Hualang 3D scanner. I feel very satisfied and purchase equipment.Super large casting site real shotPractical problemsBecause the vi...
    • Release Time: 2019 - 05 - 14
      Three-dimensional scanning scheme for large coal mine machine partsA state-owned unit in Zhangjiakou needs to repair the outer casing of a large coal mine machine. Because there is no drawing, it is difficult to carry out the repair work. The customer is looking for a solution. The three-dimensional scanning of the coal mine machine is carried out by our wireless handheld three-dimensional scanner DRAKE. The 3D data is reversely repaired to reduce the company's losses. The final result is very satisfactory to the customer and purchase our equipment.Practical problemsThe outer casing of the coal mine machine is large and cumbersome, with different surface contours and more dead angles. The customer needs to reverse the outer casing of the coal mine machine, requiring high data precision to ...
  • New energy
    • Release Time: 2020 - 05 - 18
      Three-dimensional detection of wind blade baseThe design of the blades in the wind turbine directly affects the conversion efficiency of wind energy. Good design, reliable quality and superior performance are the determinants of the normal and stable operation of the unit, which directly affects its annual power generation and is an important part of wind energy utilization. Through the three-dimensional scanning technology, the three-dimensional data of the blade detection can be quickly obtained for analysis and comparison, data parameters are provided, hidden danger problems are found in time, and design modification and replacement are carried out.Real shot of wind bladePractical problemsThe customer mainly measures the root of the blade, and the large circle of the root is evenly cove...
    • Release Time: 2020 - 05 - 06
      Gas turbine inspection and scanningA gas turbine is an internal combustion power machine that uses continuous flowing gas as a working substance to drive an impeller to rotate at high speed and convert the energy of fuel into useful work. It is a rotary impeller heat engine. Combustion chambers and turbines have high operating temperatures and also withstand the thermal shock caused by dramatic temperature changes during gas turbine start-up and shutdown, so they are the key components that determine the life of the gas turbine. It is necessary to scan and obtain data analysis on the arc section of the steam turbine to improve work efficiency, and the use of automated three-dimensional measurement can provide a suitable solution.Real shot of gas turbine sitePractical problemsThe gas turbin...
    • Release Time: 2020 - 04 - 23
      3D inspection of petroleum drill bitsPetroleum drill bits are an important tool for petroleum drilling. They are used to drill oil when it is extracted. The quality of its working performance will directly affect the drilling quality, drilling efficiency and drilling cost. The tooth face of petroleum bricks is prone to wear during use, and the degree of wear and tear will also have different effects on the later exploitation of oil. Therefore, customers need to understand the situation of oil bit detection and analysis, and use a three-dimensional scanner to scan and obtain data.Real shot of oil drill sitePractical problemsThe structure design of the tooth surface of the oil drill bit is complicated, with grooves. Since the oil drill is an important tool for oil drilling, it can have a dir...
    • Release Time: 2020 - 02 - 20
      Impeller scanning reverse designImpeller refers to the wheel disc with moving blades, and it can also refer to the collective name of the wheel disc and the rotating blades mounted on it. The unevenness of the gas flow inside the impeller is easy to accelerate wear. In order to reduce the entry of corrosive gas and improve the wear resistance of the impeller, the design and materials can be modified. Customers find our company and hope to obtain data through our three-dimensional scanning technology for comparison and use in later work.Impeller physical mapPractical problemsThe overall outline of the impeller is complex, and the blade part is prone to cause dead angle shadows. The customer needs to be able to accurately measure the data of the impeller. The accuracy is high, but the scanni...
    • Release Time: 2016 - 07 - 22
      Three dimensional detection of wind turbine bladesWind turbine blade design directly affects the conversion efficiency of wind energy, which directly affects the annual power generation, aerodynamic performance of the airfoil with a better aerodynamic performance of the airfoil and aerodynamic analysis. The airfoil is the aerodynamic shape of the blade, which directly affects the utilization of wind energy. Airfoil has the advantage of high lift coefficient and lift drag ratio under design conditions, and has good performance in the non design conditions. Wind blade 3D scanning spot Practical problems 1 for the detection of wind turbine products, the use of traditional measurement tools can not be effective measurement of wind blades.2 wind blade surface curvature is larger,...
  • Ship engineering
    • Release Time: 2016 - 07 - 22
      Ship engine detectionAnalysis of full size surface 3D engineers use 3D scanner Huaguang HL-3DW can be generated on a ship engine, a detailed test report, any position deviation can also display the numerical value of.Practical problems1, the ship engine shell size 2m*0.8m*1m, curved surface, assembly position very much, in addition to improve the measurement efficiency, and shorten the measurement time, the measurement accuracy will be well controlled, global measurement accuracy within 0.1mm2, with the traditional measurement method to obtain the ship engine housing data is insufficient, can not be carried out two times the design and product quality inspection.CO3D solutionsIs a leading Foundry Company in large castings industry veteran of the company, the traditional engine measurement ...
    • Release Time: 2016 - 09 - 10
      Large canoe reverse scan modelKayak models up to four meters, scanning the difficulty coefficient is big. Through the analysis of 3D Technology Engineer Huaguang scanning, 3D scanner using HL-3DW technology, 3D data can only get forty minutes time kayaking model, the accuracy of the 0.1mm.Practical problems1, the traditional method of measuring data acquisition density is not enough (data deficient) and the surface model and the radian of canoeing can not be measured, unable to detect late nor reverse mapping.2, kayak model 4.0m long, general 3D scanner scanning format is small, large objects when the cumulative scanning area too much, can not find and so on logo stitching. Generate a large amount of work, low efficiency, and the accuracy of the data can not reach the customer demand.CO3DS...
  • Electronic appliance
    • Release Time: 2020 - 05 - 28
      3D inspection of automated production lineThe automated machine system brings great convenience. It is used in conjunction with robots for path planning. Good path planning is the key to affecting the efficient operation of the robot production line. On the basis of pre-judging the robot working path, by establishing a robot space coordinate system, The method and influencing factors of the robot's initial pose and optimal path selection are analyzed. Check whether the robot path planning method meets the actual production requirements.Real production diagram of automated production linePractical problemsBecause it is for path planning, it has high requirements on all links of the automated production line. It can be used in conjunction with the robot to avoid errors. Therefore, it require...
    • Release Time: 2020 - 03 - 31
      Coil 3D scanningA coil usually refers to a wire winding in a toroidal shape, which is a guide wire that is wound one by one, the wires are insulated from each other, and the insulation tube may be hollow, or it may include an iron core or a magnetic powder core. The inductance of the coil is related to the presence or absence of a magnetic core. Inserting a ferrite core into an air-core coil can increase the inductance and improve the quality factor of the coil. Customers want to obtain accurate coil data and apply it to automated equipment to automatically identify data for screening.Coil live scanPractical problemsThe overall volume of the coil is small, and the winding wire is thin, and the wire is wound around the insulation tube one by one. There are many details in scanning. Using tr...
    • Release Time: 2019 - 12 - 19
      3D scanning of foamed filmA manufacturer needs to perform a three-dimensional scanning of the foamed film for comparison, to adapt to the development of the society, and make better improvements in order to accelerate the production of later models. We find that our company uses new scanning equipment to scan to obtain high-precision 3D data, which can solve the problems that customers currently face, improve quality, increase production, expand the market, develop new customers, and cooperate with long-term customers for a long time.Scanning scene of foam filmPractical problemsThe surface of the sample that the customer needs to scan is irregular and uneven, and the details need to be scanned completely. The groove part is reflected, and the device needs to have a strong capture ability.S...
    • Release Time: 2019 - 11 - 22
      Three-dimensional inspection of air conditioning pipelineAir conditioning is an indispensable electrical appliance in the interior, especially in the summer, the usage rate is extremely high, and the annual demand is also increasing. A certain manufacturer of air conditioners has found that we want to use 3D scanners to scan and test the air conditioning components, and obtain accurate data for later design and production, so that the overall design is more reasonable, enhance the competitiveness of air conditioners in the market, and improve sales. the amount.Air conditioning pipeline site scanPractical problemsIt is necessary to measure the size and parallelism of the air conditioning pipe to compare the previous data to see if there is any deformation. According to the overall assembly ...
    • Release Time: 2019 - 11 - 06
      Mobile phone 3D scanning reverse designThe use of modern mobile phones is high, the system software is constantly being upgraded, and the speed of mobile phone replacement is very fast, but not only the upgrade of the internal system is required, but the appearance is also very important. A brand of mobile phone manufacturers need to scan the phone for the appearance data and reverse design. Can be used for the next model of the mobile phone to rationalize the design upgrade, data comparison analysis, increase the customer the attraction to improve the company's competitiveness in the market.Mobile phone real shotPractical problemsThe phone is small in size, the screen is curved, curved, and smooth and easy to reflect. The overall important small details are many, need to be accuratel...
  • Mould testing
    • Release Time: 2020 - 05 - 14
      Three-dimensional fence inspectionFence is a net made of iron wire, which has many uses. The thickness of the wire and the density of the wire are different. In the use of fence nets, customers need to understand the area and density of fence nets, and they need to use objects in the later stage to perform effective data analysis and adjustment, find gaps in time, solve problems as soon as possible, and improve work efficiency.Fence net real shot mapPractical problemsThe fence mesh has a small density and a fine mesh surface. The customer requires calculating the area and measuring the density. The scanned data is complete and the accuracy is high, which requires high scanning equipment. Using traditional manual measurement, the measured density is inaccurate, the calculated area is incomp...
    • Release Time: 2020 - 04 - 22
      3D inspection of petroleum drill bitsPetroleum drill bits are an important tool for petroleum drilling. They are used to drill oil when it is extracted. The quality of its working performance will directly affect the drilling quality, drilling efficiency and drilling cost. The tooth face of petroleum bricks is prone to wear during use, and the degree of wear and tear will also have different effects on the later exploitation of oil. Therefore, customers need to understand the situation of oil bit detection and analysis, and use a three-dimensional scanner to scan and obtain data.Real shot of oil drill bitPractical problemsThe structure design of the tooth surface of the oil drill bit is complicated, with grooves. Since the oil drill is an important tool for oil drilling, it can have a dire...
    • Release Time: 2020 - 04 - 13
      Industrial turntable inspectionAs the pace of social development has accelerated and the level of technological manufacturing has increased, industrial production has gradually replaced machines with manual operations to speed up production, increase work efficiency and reduce labor costs. Industrial turntables need to use three-dimensional scanning technology to scan to obtain accurate data, detect whether there is a problem, and avoid deviations in the production process.Scanning scene of industrial turntablePractical problemsThe surface part of the scanned sample is complex, irregular in shape, and has holes of different sizes, which requires high accuracy of the scanned data and reduces problems in the production process.Scanning scene of industrial turntableManual scanning or traditio...
    • Release Time: 2020 - 03 - 27
      3D scanning of foam moldThe foam molding mold is a plastic foam mold. The principle is to fill the foaming resin directly into the mold, make it heat and melt to form a gas-liquid saturated solution, and through nucleation, a large number of micro-bubble nuclei are formed and the nuclei grow to form a foam plastic part. During the use of the die, the punch is prone to breakage, bending and rupture, and is prone to damage. The customer wants to use 3D scanning technology to obtain data retention for later repair of mold damage.Scanning scene of foam filmPractical problemsThe surface structure of the foaming mold is relatively complex, with different shapes, large shapes, and obvious details in the details. You can use a 3D scanner to quickly obtain data.Scanning scene of foam filmTraditiona...
    • Release Time: 2020 - 01 - 07
      3D scanning of sheet metal partsSheet metal parts are products manufactured by sheet metal technology. Sheet metal parts can be used everywhere in life, and the application range is becoming more and more extensive. However, the design of sheet metal parts is an important part of the product development process. Customers use 3D scanning technology to scan and produce the sheet metal parts to obtain data, so that the design sheet metal parts can not only meet the product function and appearance requirements, but also be simple to manufacture and low in cost.Scanning scene of sheet metal partsPractical problemsThe customer needs to be able to complete the scan in a short period of time, and the scanned data has high accuracy, because the design of sheet metal parts should ensure simple stam...
  • Educational equipment
    • Release Time: 2020 - 04 - 16
      Hard hat reverse designA hard hat refers to a hat that protects a person's head from damage caused by falling objects and other specific factors, and is composed of a shell, a cap lining, a chin strap, and accessories. Each helmet has certain technical performance and scope of application. As a safety protection, it has great requirements on the quality of the materials used and the rationality of the design. Manufacturers require scanning helmets to do reverse modeling and make corresponding changes to design improvements.Hard hat scanning scenePractical problemsThe helmet shell has a large radian and holes around it. It is not accurate enough to obtain data using traditional scanning methods. It is impossible to perform a complete measurement of the curvature of the surface, so it cannot...
    • Release Time: 2020 - 01 - 10
      3D scan of Venus sculptureVenus sculpture is an art treasure, carved by hand with a knife. Carving sculptures by hand is a long and large amount of work, and it is difficult to control the accuracy of details. Therefore, it is difficult to rely on hand carving for mass production. The 3D scanning technology can be used to open the mold to make it meet the needs of the public. This can not only speed up production efficiency, but also save labor costs, and it has high accuracy.Venus live shotPractical problemsThe surface texture of Venus sculpture is remarkable. It is a humanoid sculpture with obvious features and pleats. Both the posture and the posture have the power of God. Customers need to have a high degree of restoration and high scanning accuracy, which meets the needs of the market...
    • Release Time: 2019 - 12 - 20
      3D scanning of mannequinsChina's clothing production and export has been ranked first in the world for more than a decade, and plastic fashion clothing model props have also been 100% domestically produced. On the other hand, mannequins are a necessary means to assist art workers in improving their modeling capabilities. The production of mannequins requires specific and accurate three-dimensional data in order to produce products that meet the requirements. A three-dimensional scanner is required to scan the mannequins. The desired data can be quickly and accurately obtained and put into batch production for production.On-site scans of mannequinsPractical problemsAccording to the needs of customers, a three-dimensional digital model of a mannequin needs to be obtained quickly. The texture...
    • Release Time: 2019 - 11 - 21
      Gastroscope handle reverse detectionGastroscope is a medical device, which has high quality requirements and is reasonable in all aspects. In order to design a more competitive gastroscope handle, the manufacturer uses a new measurement method to scan the gastroscope handle for reverse detection. Or where there are defects, the appearance and details of the gastroscope handle can be improved more rationally, and the production efficiency and product quality can be improved.Gastroscope handle site scanGastroscope handle site scanPractical problemsThe gastroscope handle performs three-dimensional scanning for reverse detection, and the customer has high precision on the scanning data. The handle of the handle is complex in structure, has various operational functions, and requires high detai...
    • Release Time: 2019 - 11 - 14
      3D scanning of human legsThe human body three-dimensional scanner is a non-contact automatic measurement of three-dimensional human body surface contours by using optical measurement technology, computer technology, image processing technology, digital signal processing technology, and the like. By utilizing the advantages of optical three-dimensional scanning and the harmlessness of white light to the human body, the human body can be scanned in a short time, and then automatically decomposed by software to obtain accurate and complete human point cloud data. A domestic hospital wants to use this technology for human body scanning, which can be used in later medical work.Human leg scan scene mapPractical problemsDuring the scanning process, the scanned body needs to maintain a posture and...
  • Automobile traffic
    • Release Time: 2016 - 08 - 10
      By a well-known car company commissioned to scan the vehicle's three-dimensional data, optimize the performance of the car. In the understanding of the actual situation, Hualang 3D technology engineers use 3D Photogrammetry System HL-3DP + 3D scanner HL-3DW, quick access to car body and wheel arch data, optimization of drag racing.The use of traditional methods not only spend a lot of time and huge investment, can not meet the actual requirements of the team. D according to the problems faced by the team, the proposed solution used in the solution: three-dimensional Photogrammetry System (HL-3DP) + 3D scanner (HL-3DW) to obtain the car body and wheel arch data. The car gets out of the car after the appearance of manufacturing data model wind tunnel experiment, test the drag coefficient.1, ...
    • Release Time: 2016 - 08 - 22
      HuaGuang 3D The advantages of the solutionReverse engineering requires the acquisition of components with a variety of shapes and complexity, and may be required to be measured in any type of environment. Due to its excellent portability, 3D HuaGuang can be collected directly in the design studio, can also be collected at the customer site, such as production sites (even in small car body shop).Since the designer wants to rebuild the functional design of the parts, the collection must be accurate and can provide all the information necessary to rebuild the new reference model for the parts to be manufactured. 3D HuaGuang will provide a complete and accurate mesh model.Compared with the traditional measurement methods, 3D HuaGuang solution can help save a lot of time. The necessary reverse ...
    • Release Time: 2016 - 09 - 09
      HuaGuang 3D The advantages of the solution  A prototype of the automotive industry in the detection of collection of a variety of appearances and the complexity of the size of the components, and may need to be measured in any type of environment. Due to its excellent portability, 3D HuaGuang can be implemented in the metrology laboratory collection, can also be in the customer's work site (for example, the production site or supplier) for collection.The inspectors wish to use digital model to assess the actual component, so the acquisition must be accurate and complete 3D model must include all the information needed to detect. 3D HuaGuang will provide a complete and accurate mesh modelCompared with the traditional measurement methods, 3D HuaGuang solution can help save a lot of time. The...
  • Aerospace
    • Release Time: 2016 - 08 - 15
      Rapid measurement, the overall size of the detection time of large workpieces such as aircraft tail in 1 hours, time measuring parts of small workpieces such as aircraft or even less than 15 minutes; in view of the quality of aviation products extremely demanding and the shape size and surface complexity are not the same, the 3D scanning system can detect aircraft parts. First scan of the parts, due to the use of non-contact scanning for complex curved surface parts soft and easily broken, unable to reach parts of the probe can easily scan, reduce the scan time of the workpiece to complete, compared with the CAD model, the color encoding error chart shows the deviation and deviation, CAD data is given for correction.All parts of the production line need to be verified by 3D, which can be r...
    • Release Time: 2016 - 08 - 12
      Thrust - before the aircraft began to move, the thrust must be applied. The aircraft continues to move, the speed increases until the thrust and resistance are equal. In order to maintain a constant airspeed, like lift and gravity must be equal in order to maintain a stable flight altitude, thrust and resistance must be equal. Assuming that in the straight flight, the engine power is reduced, the thrust will fall, the aircraft speed will slow down. As long as the aircraft would have been less than thrust resistance, slow down, know that it is not enough to support the flight airspeed. 1.Mold / model 3D scanA preliminary air flow analysis for the following types of components to the CFD model:A. wingB. bodyC. hoodD. exhaust mixerE. external storage tankF. through the CAD application to...
    • Release Time: 2016 - 08 - 15
      The use of aircraft to scan data can be compared to the damage after the body, more intuitive to see the site of injury, can provide the most reasonable direct repair scheme of aircraft damage, improve the safety of the aircraft, can also evaluate the quality of the repaired parts, whether can give accurate judgment to take off again. Aircraft maintenance can also through comparison, more intuitive to see the deformation or displacement of parts, these parts previously indistinguishable to the naked eye easily scan out of repair, make the detection process more complete. Data can also be stored in a permanent document, to provide a more solid theoretical basis for the subsequent repeated repairs.A. damage assessmentB. for the renovation of part of the consistency assessment to modify the m...
  • Heavy equipment manufacturing
    • Release Time: 2016 - 08 - 13
      HuaGuang 3D The advantages of the solution  Detection of castings and forgings requires the acquisition of various shapes and sizes of the components of the complex, the acquisition process may be performed in any type of environment. With its excellent portability and multi functionality, 3D HuaGuang can be directly in the foundry, the customer's housing, production sites or suppliers to perform any part of the collection.Quality inspection personnel or operating personnel usually need to use the corresponding digital models of physical components to assess their. Therefore, the collected data must be accurate, and the 3D model must contain all the information needed to complete the test.3D HuaGuang will provide a complete and accurate mesh model. Compared with the traditional measurement...
    • Release Time: 2016 - 08 - 13
      Because all of our proprietary products are based on the foreign advanced technology, whether to scan vehicles or parts size, regardless of whether there is around the dirt, dust, wind, temperature or other extreme conditions, can provide reliable and highly accurate measurement data.Before designing an agricultural, construction or mining equipment spare parts, the designer must extract the dimensions of the vehicle or equipment. In order to ensure good coordination and performance, the dimensions must be accurate and complete.
    • Release Time: 2016 - 08 - 13
      HuaGuang 3D The advantages of the solutionDetection of castings and forgings requires the acquisition of various shapes and sizes of the components of the complex, the acquisition process may be performed in any type of environment. With its excellent portability and multi functionality, 3D HuaGuang can be directly in the foundry, the customer's housing, production sites or suppliers to perform any part of the collection.Quality inspection personnel or operating personnel usually need to use the corresponding digital models of physical components to assess their. Therefore, the collected data must be accurate, and the 3D model must contain all the information needed to complete the test.3D HuaGuang will provide a complete and accurate mesh model. Compared with the traditional measurement m...
  • New energy
    • Release Time: 2016 - 09 - 09
      Turbine component analysis  HuaGuang 3D The advantages of the solution  Turbine component analysis may require the acquisition of arbitrary shape and complexity of the parts in an unstable environment. In addition, parts are usually located in the hard to reach position. Due to its excellent portability, compact size and built in the parts of the coordinate system function, even if you need to scan directly in the spiral case, 3D HuaGuang can also be directly on the turbine device to perform the collection.Because the quality of the turbine components is critical to a good working condition, the acquisition must be accurate and include all the information needed to assess the status or to create a complete 3D dimensional model. 3D HuaGuang scanner is an ideal equipment to provide a complet...
    • Release Time: 2016 - 08 - 12
      Whether it is the reverse process, detection, repair or transformation of power generation components, 3D HuaGuang to provide reliable, advanced portable 3D measurement technology for the power market. Small spaces and difficult to access components are no longer a problem, because of its well-known portability and small size makes them available in any place to collect measurement data. Our data accuracy is among the best in the market, while TRUaccuracy technology ensures the stability of the measurement setup, so that the device can be measured in an unstable environment
    • Release Time: 2019 - 05 - 17
      Huaguang 3-D is based on the frontier of industrial 3-D measurement technology. It devotes itself to the 3-D digital manufacturing of industrial products. It develops and manufactures photographic 3-D scanners, hand-held 3-D laser scanners, 3-D photogrammetry systems and 3-D motion capture systems. Main applications: reverse engineering, three-dimensional detection, three-dimensional printing and product three-dimensional digitization and other fields.Huaguang 3D brings you:Scanning data integrity (large-scale comprehensive scanning, accurate acquisition of complete three-dimensional data)Because the scanned workpiece in energy equipment is often large and difficult to move. It is difficult to obtain complete and accurate data by using traditional measurement methods.Three-dimensional scan...
    • Release Time: 2016 - 08 - 12
      We selected material and process design, wind turbine blades, are the main factors determining the wind power device performance and power, affect the unit cost of wind power generation, in order to improve the efficiency and reduce the cost of the fan two factors, making positive development of large leaves. Generally speaking, wind blade length of a few meters, or even tens of meters, so large in size, with little or no previous measuring equipment suitable for 3D measurement can be performed on it, that is to use laser total station 3D measurement, 3D data also just get the key points, slow measurement speed and low accuracy.1 scanning data integrity (large scale comprehensive scanning, accurate access to complete three-dimensional data)The workpiece is often large and difficult to move...
  • Ship engineering
    • Release Time: 2016 - 09 - 10
      Ship engineering is the concentrated embodiment of the advanced manufacturing technology. Measurement, whether it is for the mapping of components, or parts of the test, does not allow any error, the measurement of the requirements can be used to describe the harsh. In the process of manufacturing, weight loss and safety is the ultimate goal of two, the requirements continue to optimize the component design and material performance, so lightweight, integrated.Ship engineering domain detection of parts of the past more than the use of contact, such as the three coordinate measuring machine, special measuring tools, the use of the method of measuring parts of the surface shape. The efficiency of this method is not high, it is affected by human factors, and it is easy to go wrong, there are s...
    • Release Time: 2016 - 08 - 15
      Ship and ocean engineering structures, the design and development of submersible underwater, the main research areas are: Marine Engineering and other kinds of structural strength, stiffness, fatigue, vibration and structural reliability; marine hydrodynamics; ship resistance, propulsion, stability, maneuverability and seakeeping. Some of the research achievements in China have reached the international level. Marine engineering is mainly research on the principle of ship machinery and application, with the continuous development of information technology, the application of radar and remote sensing technology, improve environmental protection requirements and more efficient use of energy, power equipment, electrical equipment, ship engine automation systems are facing new challenges and t...
  • 师资队伍
    • Release Time: 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国,英国,加拿大,澳洲,新西兰)·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证知名师范院校外语系师范专业毕业,毕业以来就一直从事小学、初中的教学和研究工作,6年的任教经验,特别是一年国际学校任教的经历,让我对中、外的小学生的语言学习有了更多的认识;在我的课堂中,学生的兴趣始终是我关注的出发点; 另外,语言不仅是一门语言,同时也是一种文化;更难得是的思维习惯的养成;我喜欢活跃互动的课堂形式,有趣的课堂形式利于提高学生的学习积极性,同时我也很喜欢教授学生掌握解题的关键,各类口诀梳理语法重难点是掌握的捷径!
    • Release Time: 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国,英国,加拿大,澳洲,新西兰)·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证        Hello,我是LINDA,毕业于广州著名学府的英语教育专业,擅长地道的口语教学,多年的口语教学经验告诉我,口语学习必须要大胆开口说,英语是一种语言,重要的是懂得如何交流和沟通。流利的口语更可以提高语感,有助于更容易学习英语。我喜欢活跃互动的课堂形式,有趣的课堂形式利于提高学生的学习积极性,帮助你找到适合自己的英语学习方法、掌握解题的关键,独特而有个性的教学风格是我的课堂。
    • Release Time: 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国,英国,加拿大,澳洲,新西兰)·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证最受学生欢迎的英语女神。 教学成绩:2013年获评明师教育最受学生喜爱女教师金奖; 2014年班均人数、带班量居英语科头名,并创下英语科目班均人数最多纪录; 曾参加高考口语,一模口语评卷工作,英语口语界权威代表。 教学特点:10年丰富的教学经验,执教高三保证班超过6年。自创语法填空(Grammar)稳夺8空技巧,小作文首句法,20分钟高分大作文速成法,助你挑战速度极限。2013年以来Sammi所带的班期期爆棚,人数居高不下,被学生奉为英语女神。
    • Release Time: 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国,英国,加拿大,澳洲,新西兰)·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证        拥有全国认可的英语专业最高等级证书---TEM-8,极具英语权威。刻苦钻研Task-based Language Teaching(TBLT)教学法,熟练掌握Reading, Speaking, Listening, Writing课堂教学技能,在教坛凭借新颖教学方法,获得家长和学生一致好评,获得“最佳教师奖”。 “3P”魅力(Professional, Passionate, Patient)专业+热情+耐心=100% 魅力 Rachel执教的英语课堂生动有趣
    • Release Time: 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国,英国,加拿大,澳洲,新西兰)·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证经验丰富·考点明确:Sarah具有丰富的教学经验,长期担任明师初中英语教材组成员,负责各大名校试卷分析工作,熟知初中各年级英语考点,提炼各类“易错题”、“高频题”;善于归纳解题方法和构建、整理知识结构体系;同时擅长针对考试题型演示解题方法,炮制最适合学生的“抢分秘笈”。 幽默课堂·轻松学习:Sarah以独特的“栋笃笑”风格,打造具有个人特色的幽默课堂,为学生们提供轻松、愉悦的学习环境。对于初中英语较难的知识点,Sarah善于以生动有趣的例子诠释,加速学生的理解及记忆。
  • 下载中心
    • Release Time: 2013 - 12 - 02
      电器企业将转战三、四级市场家器产品的销售主要集中在城市一、二级市场,三、四级市场潜在需求还没充分挖掘。一、二级市场竞争激烈,必然伴随着运营成本的提高,缩小了利润空间。而在稳定发展的经济大环境下,消费水平和消费能力的日渐形成,三、四级市场会日渐启动。电器企业必将加速转战三、四级市场的步伐。产品的系列化、渠道的多样化、人员的素质化、营销的战略化是企业全面攻占新市场必不可少的战略武器。电器企业必须不断地增强多元化的综合竞争力。
    • Release Time: 2013 - 12 - 02
      LED车载屏是安装在车上的,使用专用电源供电,通过控制卡接收、输出数据给点阵LED单元板,通过控制点阵的亮灭显示文字、图片、动画、视频的设备。一般有出租车、公交车、警车安装LED车载屏。它是随着LED显示屏的迅速发展而独立出来的一套LED车载显示系统,与普通的门头屏、固定不移动的LED显示屏相比,它对稳定性、抗干扰性、防震动、防尘等方面的要求更高。迅灵车载屏在各个方面都有严格的把控、对产品的要求更高。
Top
Case Automobile traffic
来源: Original
Release Time: 2020 - 04 - 14
Three-dimensional inspection of high-speed rail sleepersHigh-speed sleepers must not only support the rail, but also maintain the position of the rail, and also transfer the huge pressure transmitted from the rail to the track bed, so they need to have certain flexibility and elasticity. . We are in control of manufacturing materials and production. Scan it with a 3D scanner to obtain data, detect and analyze where problems occur, and make adjustments to measures.High-speed rail sleeper scene scanPractical problemsScanned samples are bulky, bulky, have many surface details, and require high measurement accuracy. Scanned data should be tested and analyzedHigh-speed rail sleeper scene scanThe traditional measurement method is used for large workpieces. It takes a long time and requires a lot...
来源: Original
Release Time: 2020 - 04 - 02
3D inspection of automobile cylinder headAs society enters industrialization, vehicle usage is getting higher and higher, so the requirements will be higher and higher. The cylinder head is often in contact with high-temperature and high-pressure gas, and therefore withstands large thermal and mechanical loads. The customer wants to scan and obtain the data, detect the quality of the produced automobile cylinder head, and distinguish the key parts of the automobile cylinder head from the defects of the product according to the high-density point cloud data to ensure that the product design fully complies with the processing logic.On-site scan of car cylinder headPractical problemsThere are many curved surfaces of automobile cylinder heads, and the shapes of the grooves on each side are dif...
来源: Original
Release Time: 2020 - 03 - 16
3D scanning of auto partsWith the increasingly fierce market competition in the automotive industry, continuous independent development and innovation, as well as continuous upgrading and application of technology. As the foundation of the automobile industry, auto parts are factors that support the sustainable and healthy development of the automobile industry. Changes need to be made to adapt to modern development, improve the ability of independent innovation, shorten the development cycle, and provide high-quality production products. Customers found our company and used 3D scanning technology to scan their car parts and obtain data. I hope to complete the work in a short time, and the completion effect is good, the pursuit of high efficiency and quality.Auto parts scan scene mapPracti...
来源: Original
Release Time: 2020 - 03 - 13
Auto stamping partsAutomotive stampings are metal stampings that make up automotive parts and can be directly turned into automotive parts. According to the types and characteristics of automotive stamping parts, different metal materials need to be selected for production to ensure product quality and save materials, and the process design reduces impact. An automobile customer needs to scan the stamping parts of automobile molds comprehensively, obtain the data to form an effect map, so as to facilitate the later production.Auto mold scan scenePractical problems1. Scanning automotive parts stamping parts provided by the customer has a complicated structure, many surface details and features, with holes, which brings certain difficulties to the scanning work as a whole.Auto mold scan scen...
来源: Original
Release Time: 2020 - 03 - 10
Car steering wheel reverse scanThe steering wheel of a car is mainly used to control the direction. As a safety part, it plays a key role in the safety of vehicles and people. It is a very important part in a car. With the continuous development of automobiles, the steering wheel must also be improved to improve the safety performance of the car. The steering wheel is generally made of magnesium aluminum alloy, which is light in weight, easy to operate and has good performance indicators. Automobile manufacturers want to research and develop cars, so they use 3D scanning technology to improve steering wheel scanning.Car steering wheel live shotPractical problemsThe steering wheel of a car contains a turntable and a joystick. Generally speaking, the shape is more complicated and irregular, ...
来源: Original
Release Time: 2019 - 12 - 16
3D inspection of engine chassisThe engine is a machine that can convert other forms of energy into mechanical energy and plays a great role. The customer wants to perform three-dimensional scanning and inspection of the engine chassis, abandon the traditional three-dimensional scanning method, use advanced three-dimensional measurement technology to obtain high-precision three-dimensional scanning data, and make technical improvements or better improve engine functions Out of better quality.Engine chassis scan scenePractical problemsCustomers need to obtain complete high-precision data for later comparison testing. The engine chassis is bulky, the overall structure is irregular, uneven, and it is easy to produce dead angles, which makes scanning difficult.Engine chassis scan sceneThe tradi...
来源: Original
Release Time: 2019 - 12 - 12
3D scanning of sightseeing car parts       Sightseeing cars generally use battery cars for power, use batteries to generate power, environmental protection and pollution-free, efficient use of resources, flexible driving, and are used in hotels, scenic spots, transportation stations and other places. With the development of various industries, the demand for sightseeing cars is also increasing, and the market is gradually expanding. The customer wants to use 3D scanning technology to scan the parts of the sightseeing car to obtain the effect data, make improvements to the vehicles produced by all parties, increase their own advantages in the market, and attract more customers.Scanning scene of sightseeing car partsPractical problems       Customers n...
来源: Original
Release Time: 2019 - 12 - 09
3D scanning of RV interior spaceWith the progress of income and society, RV will have great development in the future. Nowadays, people are more and more eager for self-driving leisure vacations. Through the continuous development and improvement of this process, the development platform for the RV industry is consolidated. Customers need to scan the space inside the RV to obtain high-precision data. The comfort of the RV space is very important. According to the changes in living needs, corresponding improvements need to be made to meet the market demand.RV physical mapPractical problemsThe interior of the RV is large, similar to a space in a room. Customers need 3D scanning to get the spatial data inside the RV. Traditional three-dimensional scanners cannot perform spatial scanning, and ...
来源: Original
Release Time: 2019 - 11 - 12
Engine link 3D scanningA power component company in Chengdu needs to carry out three-dimensional inspection of the engine engine connecting rod. The company uses the three-dimensional scanner independently developed and produced by Co3d, and combines the three-dimensional inspection engineering software to obtain high-precision three-dimensional data of the engine connecting rod. The overall data of the obtained starting link body is compared with the original CAD model for progressive data, and the actual data of the engine connecting rod is actually scanned to analyze whether the finished product is qualified.Engine link field scanPractical problems1. The customer requests to obtain high-precision three-dimensional data of the automobile engine connecting rod for detection. Because the e...
来源: Original
Release Time: 2019 - 10 - 30
Motorcycle engine three-dimensional inspectionThe motorcycle engine is a machine that ignites the fuel mixture entering the cylinder to convert the thermal energy generated by the combustion into mechanical energy, and transmits the power to the rear wheel of the motorcycle through the transmission mechanism to become the driving force of the vehicle. The motorcycle engine has the advantages of small inertia force, low vibration and low noise. The engine plays an important role and has a great influence on motorcycles. Need to grasp the quality problem, the customer wants to scan the data to obtain data, analyze the need for improvement.Motorcycle parts real shot mapPractical problemsThe overall structure of the power is complex and irregular, the surface is uneven, and the shape of the co...
来源: Original
Release Time: 2019 - 10 - 29
High-end brand bicycle saddle three-dimensional scanningBicycle saddles are commonly installed on bicycle seat tubes to provide an indispensable part of sitting support. With the popularity of electric bicycles due to their lightness and environmental protection, the expansion of the electric bicycle market has also promoted the development of the bicycle saddle market to some extent. In the next few years, companies in the bicycle saddlery industry will continue to improve production technology and improve product quality, and the industry competition will become increasingly fierce. A manufacturer should adapt to the current state of development to make corresponding improvements, using 3D scanning technology to detect and analyze.Bicycle saddle scene scanPractical problemsThe saddle of ...
来源: Original
Release Time: 2019 - 10 - 16
Reverse design of automotive partsAuto parts are various units that make up the car as a whole and a product that serves the car. With the increasingly fierce competition in the auto parts processing market, the deepening of the environmental protection concept, and the continuous upgrading and application of technology, it is necessary to change and perfect at the same time. Customers want to use the scanner to detect parts, and later improve the design or reverse design to improve the drawings.Auto parts and accessories real shot mapPractical problemsThe overall structure of the parts is complex, each shape is different, some small components, uneven, open surface with deep grooves, irregular inner contours, easy to form dead angles, there is a certain difficulty in scanning work.Auto pa...
来源: Original
Release Time: 2019 - 10 - 12
Automobile shock absorber 3D scanning inspectionThe shock absorber is a fragile accessory in the process of using the car. The working of the shock absorber will directly affect the stability of the car and the life of other parts. Therefore, the shock absorber should be tested, the fault repaired, and the shock absorber Often in good working condition. The customer wants to use the scanner to scan the shock absorber for comparison of test data and make adjustments.Auto shock absorber real shotPractical problemsThe overall structure of the automobile shock absorber is complex, with many components, irregular surface details, different sizes, and surface reflection needs to be sprayed.When using a conventional scanner, the scanning time is long and time consuming for complex workpieces. Mor...
来源: Original
Release Time: 2013 - 11 - 29
Three dimensional scanning caseA motor car manufacturer wants to improve the front part of the motor car, so as to improve the competitiveness of the enterprises. The 3D data using a handheld laser scanner engineer Huaguang HL-3DH-3M acquisition in the front part of the car, and then through post-processing software, successfully shorten the development process of new products.Practical problems1, the customer in the plant shop on the front end of the motor car scanning, so for three-dimensional scanning equipment, portable and stable with high requirements.2, the customer's original data acquisition method is manual measurement, the accuracy is not high, the speed is slow.3, the quality of the front end of the car directly affects the overall performance of the motor car, for the acquisit...
来源: Original
Release Time: 2013 - 11 - 29
Racing suspension system 3D scanHuaguang engineers use type 3D Scanner Camera 'HL-3DS+' for the Guangdong International Speedway racing team of a scanning suspension, customers need high precision 3D data obtained by scanning the car suspension system debugging, the car can show excellent performance in the game.Practical problemsSuspension system is one of the most difficult parts of the whole vehicle, the structure of the system is complex, the parts are fine, and the dead angle is much.The customer requires the car's four suspension systems to be in the same coordinates.CO3D solutions Ready to work: Huaguang engineers are spraying agent The car suspension system is defined by the body and tire between the spring and shock absorber and other parts of the whole support system, i...
来源: Original
Release Time: 2016 - 07 - 22
Racing car body 3D scanning programCO3D commissioned by a well-known car companies, car vehicle scanning 3D data, optimize the performance of the car. In the understanding of the actual situation, the use of three-dimensional 3D Technology Engineer Huaguang Photogrammetry System HL-3DP + 3D scanner HL-3DW, quick access to car body and wheel arch data, optimization of drag racing.Practical problems1, the traditional measurement method of data acquisition density is not enough (data) and the surface of the body and the curve can not be measured, can not be normal detection, the latter can not reverse the drawing. Heavy workload, low efficiency and accuracy is not high, can not reach the customer requirements.2, scan the car body and the wheel arch, optimize the body structure, so that the ca...
来源: Original
Release Time: 2019 - 09 - 29
3D scanning of automobile engine connecting rodA power component company in Chengdu needs to carry out three-dimensional inspection of the engine engine connecting rod. The company uses the three-dimensional scanner independently developed and produced by Hualang, and combines the three-dimensional inspection engineering software to obtain high-precision three-dimensional data of the engine connecting rod. The overall data of the obtained starting link body is compared with the original CAD model for progressive data, and the actual data of the engine connecting rod is actually scanned to analyze whether the finished product is qualified.Engine connecting rod scanning site mapPractical problems1. The customer requests to obtain high-precision three-dimensional data of the automobile engine...
来源: Original
Release Time: 2019 - 09 - 23
3D scanning of automotive stampingsAuto stampings are metal stampings that make up automotive parts. There are many kinds of automobile stamping parts, and all kinds of them are manufactured according to the performance requirements of auto parts. In the production process, the process is suitable for industrial multi-variety and mass production. The relationship between cold stamping materials and automobile stamping parts production is very close. The quality of the materials not only determines the performance of the products, but also directly affects the process design of the automotive stamping parts process, affecting the quality, cost, service life and production organization of the products. Rational selection of materials is an important and complex task. Manufacturers want to te...
来源: Original
Release Time: 2019 - 06 - 29
Engine block 3D inspectionThe engine is the core that powers a machine. It is the heart of the machine. It affects the power, economy and environmental protection of the machine. It is a very core component. Therefore, the design of the machine is not as good as it is better to have a good engine. Whether in design, manufacturing, process or performance, control, it is constantly improving. The focus now is not only on the power of a machine, but also on energy consumption, exhaust emissions and the environment. Machine manufacturers are trying to improve the performance of their engines and improve the competitiveness of their products. A manufacturer needs to use a scanner to scan the engine for quality inspection and R&D data analysis.Engine scanProblem facing | Practical problemsTh...
来源: Original
Release Time: 2019 - 06 - 26
Off-road vehicle roof three-dimensional scanning detectionNowadays, travel is carried out by car, which is convenient and saves time and effort. The car has become a transportation tool widely used in various fields of social and economic life. With continuous improvement, the requirements for all aspects of the automobile are becoming more and more strict. It is not simply a tool that can travel, but also promotes the development of new automotive technologies. It is not only the development of internal software systems, but also the evolution of the shape of the car. In a period of time, we are constantly developing new shapes. It is a development of automotive aesthetics. It has become a variety of types and specifications. A car company customer needs to scan and test the car roof to o...
来源: Original
Release Time: 2019 - 05 - 17
Three-dimensional Inspection Case of Automobile Lamp MouldIn recent years, the rapid development of China's automobile industry has brought a broad space for the development of domestic automobile moulds. At present, the production of automobile moulds has accounted for about one third of the total production of moulds. A well-known automobile manufacturer in Guangzhou needs to carry out regular quality inspection of automobile lamp moulds, to detect the extent of die wear and tear, and to repair the moulds in the later stage.Practical problemsCustomer background:Customer is a Sino-Japanese joint venture, which imports advanced Japanese automotive production technology. It mainly deals in the design and manufacture of automotive moulds and the development and manufacture of vehicle technol...
来源: Original
Release Time: 2019 - 04 - 16
3D Scanning Case of Automotive Suspension SystemCustomer is a well-known automotive parts manufacturing enterprise in China. Customers need to scan automotive suspension system in three-dimensional, obtain high-precision three-dimensional data and reverse modeling to make technical reserves for later product improvement and upgrading. Practical problems1. It is very tedious and time-consuming to measure the automobile suspension system by using traditional methods (such as checking fixture, fixture, three coordinates, etc.), and it is not easy to measure and test the automobile suspension system accurately and quickly.2. Vehicle suspension system is complex and irregular in shape, and there are many curved surface contours. Customers need to accurately measure the hole position of the...
来源: Original
Release Time: 2019 - 03 - 14
Of Automated Measurement AutomobileCustomer is a well-known automobile production group at home and abroad. In order to meet the market demand and improve the competitiveness of enterprises, customers decide to abandon the traditional detection methods and introduce new measurement methods. Customers need to carry out quality testing for new energy automobile battery modules, quickly obtain accurate and detailed 3d test results.Practical problems1. New energy vehicle battery module has large size, irregular surface, different grooves and more holes. Customers need to accurately measure workpiece holes, which brings great difficulty to traditional measurement work.2. The traditional measurement method is very tedious and time-consuming, which can not meet the needs of customers. Customers r...
来源: Original
Release Time: 2018 - 12 - 28
Motorcycle accessories 3D scanning case  The customer is a well-known motorcycle manufacturer. In order to meet the market demand and improve the competitiveness of the company, the customer decided to abandon the traditional measurement method and introduce a new measurement method (using our handheld three-dimensional scanner HOLON760 for three-dimensional inspection) to modify the motorcycle. In order to improve the overall performance and design of the motorcycle, improve product development speed and product improvement.Motorcycle effect displayPractical problemsThis caseShape customers: well-known motorcycle manufacturersScanning object: off-road motorcycle parts scanning modification detectionTesting equipment: laser handheld 3D scanner HOLON760Measurement requirements: to detect th...
来源: Original
Release Time: 2018 - 11 - 27
Three-dimensional inspection of automobile engine blockAn engine manufacturer in Chengdu needs to carry out three-dimensional inspection of the engine block of the automobile. The company uses the 3D scanner independently developed by Huaguang and combines the 3D inspection engineering software to obtain accurate 3D data of the engine block. The obtained engine cylinder overall data is compared with the original CAD model for targeted data, and the actual data of the engine block is actually scanned to analyze whether the finished product is qualified.Practical problems1. Since the engine block of the car involves connection with multiple parts of the engine, the accuracy required by the customer is very high.2. The engine block of the automobile has the characteristics of complex shape, l...
来源: Original
Release Time: 2018 - 11 - 27
Automotive engine connecting rod scanning caseA power component company in Chengdu needs to carry out three-dimensional inspection of the engine engine connecting rod. The company uses the three-dimensional scanner independently developed and produced by Hualang, and combines the three-dimensional inspection engineering software to obtain high-precision three-dimensional data of the engine connecting rod. The overall data of the obtained starting link body is compared with the original CAD model for progressive data, and the actual data of the engine connecting rod is actually scanned to analyze whether the finished product is qualified.Practical problems1. The customer requests to obtain high-precision three-dimensional data of the automobile engine connecting rod for detection. Because t...
来源: Original
Release Time: 2018 - 11 - 27
Motor car cockpit scanning caseThe design result of the motor car cab will have an important impact on the overall EMU. Therefore, designing and manufacturing the EMU cab with smooth surface, beautiful appearance and aerodynamic requirements has become the focus of designers.Practical problemsThe scanning requirements of the cockpit of the motor car are very high, the arc is large, and the curved surface is many. It is difficult to use the traditional measuring method, and the 3D model data of the cockpit of the motor car cannot be obtained quickly and accurately.Co3d solutionsIn response to the problems faced by customers, Huaguang technical engineers proposed the use of the solution: the handheld 3D scanner HL-3DH-3M to obtain 3D data of the cockpit of the motor car, and the 3D data of t...
来源: Original
Release Time: 2018 - 11 - 27
Mercedes-Benz reverse three-dimensional scanning caseThe new energy electric vehicle market has formed a significant market space under the state's strong subsidy policy and support policies. In the consumer sector, the replacement of traditional fuel vehicles with electric vehicles will become a trend. Electric vehicles are an alternative to traditional fuel vehicles for home use, but electric vehicles cannot meet the diverse needs of consumers. As the traditional automotive industry system is very mature, electric vehicle manufacturers hope to modify the existing products from design to product through 3D scanners.Practical problems1. A company needs to use a camera-type 3D scanner to convert electric vehicles from traditional fuel vehicles, avoiding large-scale capital investment, and a...
来源: Original
Release Time: 2018 - 11 - 27
3D inspection of automotive turbocharger partsA well-known auto parts manufacturer needs to carry out three-dimensional inspection of auto turbocharger parts. According to the problems faced by customers, our company has independently developed and produced Huaguang 3D scanner 3DS+, and combined with 3D inspection engineering software, obtained Accurate 3D data for automotive turbocharger components. The obtained data of the automobile turbocharger parts and the original CAD model were compared with the original data, and the actual data of the automobile turbocharger parts were actually scanned to analyze whether the finished product was qualified.Practical problems1. Since the automobile turbocharger often works at high speed and high temperature, and involves the connection with multipl...
来源: Original
Release Time: 2018 - 11 - 27
BMW compressor 3D scanning caseDomestic famous BMW automobile manufacturers need to carry out quality inspection on BMW air compressors. According to the problems faced by customers, we use Huaguang Photographic 3D Scanner 3DS+ and use Geomagic Qualify to compare the 3D model of BMW Air Compressor with the entity. Analyze to obtain an accurate reconstruction model. Thereby improving the accuracy of product design, greatly shortening product development design and processing cycle and reducing costs.Practical problems1. BMW air compressor is very strict on the technical indicators of the project. The accuracy of the three-dimensional data of BMW air compressor is very high, and the overall error needs to be controlled within 0.05mm.2, the traditional measurement method data acquisition dens...
来源: Original
Release Time: 2018 - 11 - 27
'CRRC Group' moving wheel pair detectionWith the many years of operation and development of high-speed rail, and accumulating a large amount of historical data related to vehicle operation, it is necessary to mine the knowledge behind the data, obtain the law of the wear and tear of the tread shape or the dimensional parameter value and the stability of the vehicle operation, and evaluate or predict the vehicle and the line. The matching status guides the wheel of the vehicle department for maintenance work. Practical problems1. The moving wheel is tested by traditional calipers and gauges. Many sizes and shape features cannot be effectively detected, which greatly affects the detection efficiency and detection accuracy of the product.2. The customer needs to quickly scan the dimensio...
来源: Original
Release Time: 2018 - 11 - 26
Three-dimensional test case of car headlamp housing Automobile headlamp housing is a large proportion of auto parts, and its quality can affect the appearance and performance of automobile. A well-known auto parts production company needs to obtain the 3d data of the car headlamp housing for the construction design and subsequent quality inspection of the products. Practical problems 1. Customers are required to quickly obtain the 3d model of the car lamp housing. Due to the complex surface of the lamp housing, the concave and convex surface is more, which makes it difficult to scan the work. 2, use the general measurement method (three coordinates, two dimensional, calipers, etc.), can only get the lamp shell a few data, surface part cannot be measured, to obtain the a...
来源: Original
Release Time: 2018 - 11 - 26
Three - dimensional scanning is used to modify the trailer With the improvement of life quality, the application of rv is becoming more and more popular, the form of a dynamic three-dimensional, invited by a saloon car modification company for iveco car draw 3 d scanning data, making better modification plan. After understanding the actual situation, the three-dimensional technology engineer USES 3D scanner 3DS + to quickly obtain 3D data of the rv and improve the efficiency of the refit. Practical problems Density of traditional measuring method of data collection is not enough (data) and for the curved surface and curve on the car can't accurate measurement, the later can't reverse mapping, big workload, low efficiency and precision is not high, can not meet the requiremen...
来源: Original
Release Time: 2018 - 11 - 26
Volvo trucks cover 3d scanning plan Volvo trucks parts production company wants to get the top 3 d scanning data, according to the truck head high density of point cloud data to distinguish between products of key parts and itself defects, guarantee the efficiency and production quality truck roof. Practical problems 1, simply use the traditional methods (such as fixture, fixture, three coordinates, etc.) to measure the truck roof, is very complicated, time-consuming, and not easy to truck roof shape measure rapidly and accurately, test. 2, the truck roof has a lot of curved surface, the surface groove shapes and more prone to deformation and truck roof volume, general 3 d scanner is difficult to quickly and accurately obtain three-dimensional digital model of car bumpe...
来源: Original
Release Time: 2018 - 11 - 24
Automobile sheet metal three-dimensional inspection caseA well-known automobile parts manufacturer in Xiangtan needs to carry out three-dimensional inspection of automobile sheet metal parts to obtain the highest precision three-dimensional data. The three-dimensional data is used as a manufacturer that independently develops and produces three-dimensional scanners in China, which not only has strong scanning environment adaptability, but also operates equipment. Simple, and at the same time able to achieve industrial-grade high-precision standards. It can speed up the development and inspection of sheet metal parts with high quality, and successfully solve the urgent needs of customers.Practical problems1. The shape of the automobile sheet metal parts is complicated, and the grooves have ...
来源: Original
Release Time: 2018 - 11 - 24
Automobile bumper scan case One well-known domestic automobile manufacturers need to reverse design of the bumper, the form of independent research and development of dynamic three-dimensional picture type 3 d scanner - HL 3 ds + 3 d scanning was carried out on the car bumper, access to the high precision of 3 d data, improve the efficiency of secondary development of auto insurance, save the cost, shorten the development cycle of new products. Practical problems 1, simply use the traditional methods (such as fixture, fixture, three coordinates, etc.) to measure the car bumper, very tedious, time-consuming, and not to the shape of the car bumper measure rapidly and accurately, test. 2, car insurance, there are many surface and card buckle area, and volume is larger in t...
来源: Original
Release Time: 2018 - 11 - 24
Three-dimensional inspection of cast steel film of high iron sleeper rail One well-known domestic China railway group need for high-speed pillow rail cast steel membrane 3 d detection, high-speed pillow rail is a very important part of railway construction, not only the relationship between the normal use of the railway also relationship with our life safety, so high-speed pillow can track the quality of the standard is particularly important. Practical problems 1. It is necessary to measure the matching of the cast steel film and the hole position of the high iron sleeper rail casting steel film.2. High casting iron pillow rail steel membrane corner is more, increasing the difficulty scanning, customers need to high casting iron pillow rail steel membrane fast scan, scan da...
来源: Original
Release Time: 2018 - 11 - 24
Mercedes-Benz car fuel tank reverse designWith the development of the automobile industry and the revitalization of the domestic automobile industry, the demand for automobile fuel tanks by major automobile manufacturers has shown a significant growth trend. A well-known production and production enterprise in Tianjin hopes to carry out three-dimensional scanning of the Mercedes-Benz G500 automobile fuel tank, obtain high-precision three-dimensional data and then process it through post-processing software to reverse the design of the product and shorten the development process of the new product. Practical problems1. The customer wants to scan the Mercedes-Benz fuel tank in the factory floor, so there is a high requirement for the portability and stability of the 3D scanning equipmen...
来源: Original
Release Time: 2018 - 11 - 24
Geely Automobile Stamping Machine Reverse DesignGeely automobile stamping machine wheel axles and gears are damaged, resulting in work stoppages. Due to the lack of drawings, repair or redoing is impossible. A well-known automobile manufacturer in Xiangtan needs to perform three-dimensional scanning on the axles and gears of stamping machine tools, obtain high-precision three-dimensional data and reverse design the axles and gears, quickly repair the axles and gears of the stamping machine, and reduce the company's losses.Practical problemsAutomobile stamping machine wheel axles and gears are large and bulky, with different surface contours and more dead angles. The customer needs to have very high precision on the appearance data of the axles and gears to achieve perfect repair effect. Th...
来源: Original
Release Time: 2018 - 11 - 24
Car hand brake 3D scanning caseAutomobile handbrakes occupy a considerable proportion in auto parts, and its quality is one of the important factors that directly affect the performance and appearance of automobiles. In the face of increasingly fierce market competition, a well-known auto parts manufacturing industry I hope to use 3D scanners to enhance the technical advantages, thus improving product quality and shortening the production cycle.Practical problems1. The shape of the handbrake of the automobile is complicated, and the shape of the groove inside the bottom surface is different, and the contour of the curved surface is more. The use of other testing equipment may result in incomplete 3D data acquisition and cannot meet customer needs.2, the use of traditional measurement metho...
来源: Original
Release Time: 2018 - 11 - 24
Light rail mold three-dimensional inspection scanning caseLight rail is an important form of urban rail construction, and it is also the most rapid development of rail transit in the world. Its quality is not only related to the normal use of light rail but also to the safety of our lives. It is especially important. The well-known domestic enterprise BYD invited our company to cooperate with the 3D scanning of the light rail mold to obtain high-precision 3D data and check whether the mold production is qualified.Practical problems  1. The light rail mold has a large volume and a red reflective surface on the surface, which increases the scanning difficulty. The deformation of the product is easy to produce during the production process, so the quality control of the light rail mold is par...
来源: Original
Release Time: 2018 - 11 - 24
Ford car mat, car three-dimensional scanning programWith China's arrival as the world's largest auto market, car modification has become a topic of interest to all car owners. Our company Huaguang 3D recently cooperated with a large domestic auto company through the use of 3D digital technology for Ford. Automobiles (the latest in 2018) are retrofitted to meet the market demand and increase the competitiveness of enterprises.Ford car scene physical mapPractical problemsThe scan is divided into two parts: car compartment scanning, car interior pad scanning.Ford car interior scanning site  Due to the large size of the Ford car (the whole car is about 4 meters long and the car is nearly 2 meters) and the scanning space of the car interior is narrow, the scanning difficulty is difficult. The c...
来源: Original
Release Time: 2018 - 11 - 14
Auto automatic brake system accessories three-dimensional inspection A well-known automobile manufacturing company in Guangzhou needs to purchase a set of three-dimensional scanning equipment instead of the traditional measuring method to scan the automotive brake system parts for quality inspection, quickly and accurately obtain detailed three-dimensional testing results, analyze the product's qualification and improve product quality. Accelerate the development of later product development, etc., to save the company's cost and time to improve the company's competitiveness.Practical problemsCustomer backgroundThe customer is a developing US-owned enterprise, introducing German advanced automobile production technology to produce a complete hydraulic base brake system and industrial c...
深圳市华朗科技有限公司 Tianjin City Economic and Technological Development Zone, Fourth Street 80, Tianda Science & Technology Park South 3 layer Mailbox:co3d@co3d.com Telephone:022-5900-2803 Fax:022-5900-2805 Zip code:300457
  • Two-dimensional code name
    Two-dimensional code name
    Two-dimensional code name
Copyright ©2005 - 2013 Huaguang 3D (Tianjin) Technology Co. Ltd.
犀牛云提供企业云服务
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 4006-971-972
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开
Top