Telephone: 022-5900  2803
  • Company news
    • Application of 3D scanner in formula racing
      Application of 3D scanner in formula racing
      Release Time： 2020 - 05 - 27
      Application of 3D scanner in formula racingA racing car built with a common formula (regular restrictions) is a formula car, and the race is a formula car race. The racing car must be manufactured in accordance with the procedures stipulated by the International Automobile Federation's vehicle technical rules, including body structure, length and width, minimum weight, engine working volume, number of cylinders, fuel tank capacity, electronic equipment, tire distance and size, etc.At the beginning of motorsports, there were no restrictions on racing vehicles, and then it was in fairness and safety. It began to try to classify and restrict racing vehicles. Finally, there was a restriction standard for all participating vehicles. The design and manufacture of the program, including body ...
      More
    • "Artificial Sun" and 3D scanner
      "Artificial Sun" and 3D scanner
      Release Time： 2019 - 06 - 18
      Improving and improving a country's energy structure and completing a country's new energy construction more quickly and efficiently is a major event that many countries are now implementing closely. The development of solar energy, around solar energy applications, humans have thought of many ways. In China, researchers are creating an artificial sun.In the circulating 2M installation, the researcher of the “vacuum chamber” technology of the Southwest Institute of Physics of the Nuclear Group Nuclear Industry, Yu Hong is the chief designer of the most important equipment “vacuum chamber” of the circulating 2M installation. A vacuum chamber inside a car tire liner is like a space capsule. This is where the nuclear fusion reaction takes place. In the future, it will reach an ultra-h...
      More
    • Application of 3D scanner in industrial inspection
      Application of 3D scanner in industrial inspection
      Release Time： 2016 - 07 - 22
      With the development of science and technology and industrial production, more and more fields have put forward the requirement of 3D measurement of workpiece size and shape parameters. Currently on the market has successfully developed three-dimensional scanner measurement instruments, such as three-dimensional scanner in the measurement range, measurement accuracy and measurement speed and other aspects than the traditional measuring instruments. Domestic industrial products to be exported to foreign countries, the need for three-dimensional detection of comparative analysis of the report, the current industrial exports are basically the use of three-dimensional scanner to do testing.Impeller three-dimensional detection schemeThree dimensional detection schemeThe export of industrial pla...
      More
    • Three dimensional Photogrammetry System - three - dimensional measuring instrument
      Three dimensional Photogrammetry System - three - dimensional measuring instrument
      Release Time： 2016 - 09 - 03
      Huaguang 3D -3DP 3D photogrammetry system is based on the high resolution of a hand-held digital camera (4288 x 2848), the object to be measured by shooting digital photos, 2D digital photo image superposition, to obtain the 3D coordinate of the measured object, and the mobile technology to capturing 3D coordinates, quality control the analyte (Inspection) and variant analysis (Deformation) can effectively save time. Prior to the beginning of the measurement, the first object is attached to the code point, and then use the camera to shoot. During the shoot, take many different angle images, these images will be read to Huaguang 3D 3DP software, because each image of the shooting angle, each image from different angles, through triangulation, Huaguang 3D 3DP software will automatically comb...
      More
    • Three dimensional laser scanner in the diagnosis and analysis of geological disasters
      Three dimensional laser scanner in the diagnosis and analysis of geological disasters
      Release Time： 2016 - 08 - 18
      "Using the latest remote sensing technology to achieve full coverage, closely monitoring the movements of geological disasters". Recently, the international famous journals published the results of the study of the China University of Geosciences - "integrated multi remote sensing technology to monitor the overall structure of the landslide and the latest progress", has aroused widespread concern in the international.According to reports, China is a geological disaster occurred frequently and the disaster loss is very serious, landslide, collapse, debris flow disaster almost throughout the provinces in mountainous and hilly areas, the activity area of about 45% of the total land area. The key of the management and prediction of geological disaster is to carry on the lon...
      More
  • Industry news
    • For the first time China has reached world advanced status, it is necessary to pay tribute to one pe
      For the first time China has reached world advanced status, it is necessary to pay tribute to one pe
      Release Time： 2020 - 05 - 23
      For the first time China has reached world advanced status, it is necessary to pay tribute to one personAffected by the epidemic, the US military used 3D technology to make masks in order to alleviate the shortage of masks. Although efficiency should not be. But it also made everyone interested in this 'magic' technology. Put powdered raw materials in the printer, you can get toys, models, car parts, etc. Therefore, 3D printing technology is also called 'Promoting the realization of the fourth The Industrial Revolution'. In this neighborhood, China is the first in the world, and China has become the only country in the world that has mastered the manufacturing technology of large-scale main bearing components of laser-formed titanium alloy and put it into practical use.With...
      More
    • Three dimensional scanner Gen Gi Khan million people
      Three dimensional scanner Gen Gi Khan million people's guard theme park
      Release Time： 2016 - 08 - 08
      Mongolia's construction of a "Gen Gi Khan million guard" theme park, apply for the world cultural heritage, reproduction of Gen Gi Khan guards glory, different scanning position, different expressions of the giant statue of the cavalry cavalry, the statue is 3 meters high, nearly 4 meters long, by the Mongolian ancient famous artists hand carved, artificial carving the cavalry sculpture for 2 months, the customer needs to use the reverse design of a model of these statues, finally cast in bronze.Gen Gi Khan cavalry sculpture scanHuaguang 3D technology engineers use 3D Photogrammetry System 3DP+ 3D scanner alpha 7000, 3 meters high, with full scan nearly 4 meters long horse sculpture. The 3D Photogrammetry System 3DP+ 3D scanner alpha 7000 supporting the use of the cavalry scu...
      More
    • The machine vision will be the future of intelligent manufacturing is a hotly contested spot
      The machine vision will be the future of intelligent manufacturing is a hotly contested spot
      Release Time： 2016 - 09 - 03
      At the beginning of June, the Russian computer vision company VisionLabs developed a common open source computer vision development platform, Facebook and Google to provide funds and test development results. In addition, in May, the U.S. Amazon Co acquired a European top machine vision team for the field of UAV research. Coincidentally, Intel's acquisition of the Russian company Itseez for computer vision, unmanned field.In recent years, foreign social class Internet Co in the machine vision industry layout is particularly rapid. Previously, Snapchat acquisition of computer vision company Seene; Pinterest acquisition of visual startups VisualGraph; Twitter acquisition based on depth study of computer vision startups Madbits.  At the beginning of June, the Russian computer vi...
      More
    • Automobile 3D gesture recognition technology to bring new experience to the user
      Automobile 3D gesture recognition technology to bring new experience to the user
      Release Time： 2016 - 09 - 03
      Image recognition technology has already been applied to all aspects of the automotive field, from the license plate number recognition to the driver fatigue monitoring system using the image recognition technology. Recently in the automotive products and popular from the 3D gesture recognition technology, through the different gestures to achieve the operation of some of the functions of the car. The whole process of gestures like "very interesting, make groundless accusations". 3D gesture recognition technology is the basis of image scanning recognition technology.  3D gesture recognition technology principle is what?By using dynamic 3D scanning system 3D gesture recognition technology, innovation is equipped with its millions of pixel level capture instruments, billi...
      More
    • New Progress in 3D Real-time Face Change
      New Progress in 3D Real-time Face Change
      Release Time： 2018 - 11 - 30
      Recently, researchers from the Institute of Automation of the Chinese Academy of Sciences published a paper on how to solve the problem of facial replacement in all postures, and proposed a real-time 3D solution.Facial alignment has become an important topic in the field of computer vision, which adapts facial models to images and extracts the semantics of facial pixels. Previously, most of the algorithms were designed for small and medium-sized faces (the deflection angle is less than 45 degrees), lacking the ability to align faces in large gestures up to 90 degrees. This paper is a method proposed for face replacement in all pose ranges.The improved version proposed by the doctoral student adds some extra work, including real-time training, training strategies, and so on, rather than jus...
      More
  • Exhibition
    • 2019 The 9th China Shanghai International Automotive Interior and Exterior Exhibition
      2019 The 9th China Shanghai International Automotive Interior and Exterior Exhibition
      Release Time： 2019 - 08 - 24
      2019 The 9th China Shanghai International Automotive Interior and Exterior Exhibition was grandly opened at the Shanghai New International Expo Center. The exhibition was held for three days on August 15-17, 2019. It covers an area of more than 40,000+ square meters and more than 35,000+ industry visitors, automotive engineers and professional related procurement personnel.Our booth mapThis exhibition is based on the theme of “car interior and exterior decoration”. Automotive industry robots and automation equipment, interior soft material cutting and cutting equipment, sewing equipment, interior parts molds and manufacturing technology, polyurethane equipment, door panel welding equipment, automotive plastics new technology and technology, ultrasonic equipment, assembly tools including an...
      More
    • 22nd North China International Intelligent Manufacturing Exhibition
      22nd North China International Intelligent Manufacturing Exhibition
      Release Time： 2019 - 05 - 07
      The 22nd North China International Intelligent Manufacturing Exhibition was grandly opened in Shenyang International Exhibition Center. The exhibition lasted for three days and was of great scale. Shenyang, the host city, is the central city of Northeast China, the transportation hub of Northeast China, and the material distribution center of China's important industrial base.On-site photographs of the exhibitionThe theme of this exhibition is a complete set of solutions for robotic application products and intelligent factories. For Hualang engineers and exhibitors (automotive assembly, automotive parts production, welding, 3C, integrated solutions for machine tool application industry, robotic workstation, robotic intelligent production line, etc.), the new three-dimensional scanner ...
      More
    • 2019 17th China (Guangzhou) International Automotive Parts Exhibition
      2019 17th China (Guangzhou) International Automotive Parts Exhibition
      Release Time： 2019 - 05 - 05
      Recently, the 17th China (Guangzhou) International Auto Parts Exhibition/International Die Casting and Casting Exhibition was held in Pazhou International Purchasing Center of Guangzhou for three days. More than 500 exhibitors (from 20 countries and regions) are expected, and the number of exhibitors is estimated to be around 40,000 (from 31 countries and regions).On-site photography of the exhibitionThe theme of this exhibition is industrial design, aviation, navigation, new energy and other industries. Hualang three-dimensional engineer communicates face-to-face with each domestic and foreign purchasing decision-maker, introduces in detail the use of three-dimensional scanner and its application industry, and concludes transactions with intended customers to expand brand influence among ...
      More
    • Ninth China Automobile Technology Exhibition & Automobile Testing and Technology Exhibition
      Ninth China Automobile Technology Exhibition & Automobile Testing and Technology Exhibition
      Release Time： 2019 - 04 - 29
      The 9th China Automobile Technology Exhibition and Automobile Inspection and Technology Exhibition opened in Chongqing International Exhibition Center. The exhibition lasts for three days, covering an area of 46,000_, with more than 700 exhibitors and a total of 35,000 participants.The theme of this exhibition is automotive front-loading industry technology. Special theme area of automobile testing and testing technology is designed to systematically display the latest testing, testing, development and validation technologies for the whole vehicle and parts, providing innovative solutions for the continuous improvement of safety, reliability, durability and high quality in automobile manufacturing industry.On-site photographs of the exhibitionHualang three-dimensional technicians displayed...
      More
    • 2019 Xi
      2019 Xi'an 3D Printing Technology and Equipment Expo
      Release Time： 2019 - 04 - 28
      The three-day China 3D Printing Technology and Equipment Fair, which opened in Xi'an Convention and Exhibition Center on March 14, is mainly about industrial design, machinery manufacturing, aerospace, jewelry manufacturing, model making, fashion, film, architecture, creative design and other 10 different industries and fields.It is a perfect combination of traditional manufacturing technology and new materials, creating an interactive platform of exhibition, communication, cooperation and trade for the majority of manufacturers and users.Headquarters Hualang 3-D portable Drake wireless 3-D scanner, 15-line (red/blue) hand-held laser 3-D scanner HOLON760 and HL-SCAN optical tracking 3-D scanner, photographic 3-D scanner and other equipment participated in the exhibition. Headquarters H...
      More
  • Camera 3D scanner
    • α7000(top with product)
      α7000(top with product)
      Release Time： 2016 - 09 - 14
      Product technology introductionHuaguang Photographic 3D Scanner has a number of patented technologies, adopting new coding calibration technology (leading technology, synchronizing advanced gom advanced technology), which is the core of 3D photogrammetry technology and application, reducing physical distortion and improving the original 3D data scanning accuracy. The heterodyne multi-frequency phase shift grating technique is used to improve the quality of the scanning point cloud. Synchronized with the German gom company, it has a Blu-ray device scanning system, and the camera-type 3D scanner scans data points up to 0.01mm, which is suitable for fine workpiece scanning. The new core design concept uses carbon fiber materials to improve the stability of the product during operation. Α7000 technical features1, super high efficiency: a car scan ≤ 2 hours2, cost-effective: no photogrammetry cooperation, can complete large-scale measurement3, high stability: the use of carbon fiber pa...
      More
    • HL-3DS(Multi-function）
      HL-3DS(Multi-function）
      Release Time： 2016 - 07 - 27
      Product technology introductionCO3D camera-type 3D scanner has a number of patented technologies, using a new code calibration technology, which is the core of 3D photogrammetry technology, and reduces the physical distortion to improve the original 3D data scanning accuracy. The heterodyne multi-frequency phase shift grating technique is used to improve the quality of the scanning point cloud. Synchronized with German gom company, it has a Blu-ray device scanning system, and the camera-type 3D scanner scans data points up to 0.01mm, which is suitable for fine workpiece scanning. It adopts international new core design concept and applies carbon fiber materials to improve product stability. Sex. 3D scanner HL-3DS technical features:1.13 step code calibration technology: eliminate lens distortion error and improve scanning accuracy2. Heterodyne multi-frequency phase shift grating: uniform fringe projection, point cloud data accuracy, no noise data3. Portable design: the hardware sy...
      More
    • HL-3DM（Precision type）
      HL-3DM（Precision type）
      Release Time： 2016 - 07 - 25
      Introduction to product technologyShape moving picture type 3 d scanner has a number of patented technology, using the latest international code calibration technology (leading domestic, the synchronization of the international advanced technology, the technology is the core of the technology of three-dimensional photogrammetry mastery and application of reducing physical distortion the original 3 d scanning data precision is improved. In this paper, the technology of multi-frequency phase shift with heterodyne method is used to improve the quality of scanning point cloud. In sync with gom in Germany, the scanning system of blue light device is true, and the scanning data point of 3d scanner can reach 0.01 mm, which is suitable for fine workpiece scanning. Adopt the new international core design concept, apply carbon fiber material, improve the stability of the product work.  Features of 3d scanner hl-3dm technology: 1. High-precision motherboard data: using German ...
      More
    • HL-3DX（top sellers）
      HL-3DX（top sellers）
      Release Time： 2016 - 07 - 27
      Product technology introduction:The shape-moving photo-type 3D scanner has a number of patented technologies and adopts a new code calibration technology. This technology is the core of the 3D photogrammetry technology and its application. The reduction of physical distortion improves the accuracy of the original 3D data scanning. The heterodyne multi-frequency phase shift grating technique is used to improve the quality of the scanning point cloud. Synchronized with the German gom company, it has a Blu-ray device scanning system, and the camera-type 3D scanner scans data points up to 0.01mm, which is suitable for fine workpiece scanning. The new core design concept uses carbon fiber materials to improve the stability of the product during operation. Industrial grade 3D scanner HL-3DX technical features:1, the product has a long service life, up to 35,000 hours2, hardware stability, system size is small (360 × 120 × 120mm), easy to disassemble, easy to bring to the measu...
      More
    • HL-3DX+
      HL-3DX+
      Release Time： 2016 - 09 - 14
      Product technology introduction: Shape moving picture type 3 d scanner has a number of patented technology, using the latest international code calibration technology (technique of synchronous leading domestic, international advanced), the technology is the core of the technology of three-dimensional photogrammetry mastery and application of reducing physical distortion the original 3 d scanning data precision is improved. In this paper, the technology of multi-frequency phase shift with heterodyne method is used to improve the quality of scanning point cloud. In sync with gom in Germany, the scanning system of blue light device is true, and the scanning data point of 3d scanner can reach 0.01 mm, which is suitable for fine workpiece scanning. Adopt the new international core design concept, apply carbon fiber material, improve the stability of the product work. Industrial grade 3d scanner hl-3dx + technical features: 1. Long service life, up to 35,000 hours 2. Hard...
      More
  • Handheld 3D scanner
    • HOLON760
      HOLON760
      Release Time： 2018 - 11 - 22
      Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, the shape of mobile handheld 3D laser scanner technology, has been widely used in reverse engineering and 3D inspection. The product uses a new hand-held design, light weight (870g), easy to carry; ready to use; high work efficiency, flexible scanning solution according to user needs, can cooperate with our 3D photogrammetry system when scanning large workpieces (HL -3DP) Eliminates accumulated errors and improves global scanning accuracy of large workpieces. Using 14+1 red laser lines, dual industrial cameras, automatic point stitching technology and scanning software, support photogrammetry and self-calibration technology. It is especially suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. The operation process is flexible and convenient, and it is suitable for various complicated application scenarios. HOLON760 Technical F...
      More
    • HOLON380
      HOLON380
      Release Time： 2018 - 11 - 22
      Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, the shape of mobile handheld 3D laser scanner technology, has been widely used in reverse engineering and 3D inspection. The product uses a new hand-held design, light weight (870g), easy to carry; ready to use; high work efficiency, flexible scanning solution according to user needs, can cooperate with our 3D photogrammetry system when scanning large workpieces (HL -3DP) Eliminates accumulated errors and improves global scanning accuracy of large workpieces. Using 6+1 red laser lines, dual industrial cameras, automatic point stitching technology and scanning software, support photogrammetry system. It is suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. The operation process is flexible and convenient, and it is suitable for various complicated application scenarios. HOLON380 Technical Features1. Light source form: 3 sets o...
      More
    • Calibry (color scan)
      Calibry (color scan)
      Release Time： 2019 - 07 - 04
      Product technology introductionCalibry handheld 3D scanner is lightweight and easy to carry, with fast scanning speed, 30 frames per second, up to 3 million points per second, wide scanning range, powerful development software, specially configured camera, three tracking modes. Breaking through the limitations of scanning objects that are too small, smooth and difficult to scan or require surface treatment, it is easy to scan sharp edges, black and shiny objects, almost unlimited object size, can scan any object, it is very convenient, high efficiency, high A precise scanner.Calibry Technical Features1. Small size (0.7kg), light and portable, hand-held and ready to use, easy to operate.2, built-in computer, scan data real-time display.3, the scanning speed is fast, can be quickly captured, 30 frames per second, up to 3 million points per second.4, can scan any object, fur and hair can be easily scanned out, black and shiny objects can be quickly scanned without surface treatment, savin...
      More
    • HOLON841
      HOLON841
      Release Time： 2018 - 11 - 23
      Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, the shape of mobile handheld 3D laser scanner technology, has been widely used in reverse engineering and 3D inspection. The product uses a new hand-held design, light weight (1kg), easy to carry; ready to use; high work efficiency, flexible scanning solution according to user needs, can cooperate with our 3D photogrammetry system when scanning large workpieces (HL -3DP) Eliminates accumulated errors and improves global scanning accuracy of large workpieces. Using 14+1 red laser lines, dual industrial cameras, automatic point stitching technology and scanning software, support photogrammetry and self-calibration technology. It is especially suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. The operation process is flexible and convenient, and it is suitable for various complicated application scenarios.HOLON860 Technical Features...
      More
    • X-Sacan
      X-Sacan
      Release Time： 2018 - 11 - 22
      Product technology introductionMy company X3DS The latest development of X-scan multi-function handheld color 3D scanner, using the latest handheld design, light weight, easy to carry; ready to use; dual industrial camera, can quickly capture 3D data of real objects, no need to paste, spray Powder processing is truly intelligent, portable, high-precision, non-contact color scanning, etc. This product has been widely used in reverse engineering and color cultural relics, 3D printing, education and scientific research.X-Scan technical features  　1. Various scanning modes: support both handheld and fixed scanning modes;2, real-time color scanning rendering, high color reproduction;3, plug and play system, convenient for quick installation and use;4, no need to paste, dusting, automatic splicing, especially for human and cultural antiques scanning.5, with light weight, flexible carrying, easy to operate, etc. can be used in a variety of complex scenes6, the equipment is...
      More
  • Three dimensional Photogrammetry System
    • HL-3DP
      HL-3DP
      Release Time： 2016 - 07 - 27
      Introduction to product technology  Shape moving picture type 3 d scanner has a number of patented technology, using the latest international code calibration technology (technique of synchronous leading domestic, international advanced), the technology is the core of the technology of three-dimensional photogrammetry mastery and application of reducing physical distortion the original 3 d scanning data precision is improved. In this paper, the technology of multi-frequency phase shift with heterodyne method is used to improve the quality of scanning point cloud. In sync with gom in Germany, the scanning system of blue light device is true, and the scanning data point of 3d scanner can reach 0.01 mm, which is suitable for fine workpiece scanning. Adopt the new international core design concept, apply carbon fiber material, improve the stability of the product work. Product features 1. Aviation special anti-pressure instrument box, anti-collision design protection. &...
      More
  • Big scene 3D scanner
    • HL1000
      HL1000
      Release Time： 2016 - 08 - 22
      Product Features | Product features.1.Anti-collisionIn high-value equipment such as port machinery / crane / special equipment / conveyor equipment and other fields.For high-value equipment, impacts often result in huge economic and personnel losses.Conventional single-point detection equipment such as photoelectric (including single-point laser), ultrasonic and other anti-collision schemes can only detect in the linear direction, and there are detection blind spots for irregular obstacles and corners.Laser scanning products enable surface inspection and scan areas in the direction of travel of the device for more reliable protection.2. DetectionIn the scanning range, different shapes of detection areas can be set, and when an object enters the area, a signal can be output through the I/O port.3. SecurityThe area can be protected by scanning the area. Laser scanning eliminates the need for additional light sources, is unaffected by ambient light, and is highly reliable.It can accuratel...
      More
  • Color 3D scanner
    • HL-3DC
      HL-3DC
      Release Time： 2016 - 07 - 27
      Product technology introductionThe HL-3DC color 3D scanner uses advanced image texture analysis and acquisition technology to maintain true color display of the surface of the object while performing 3D data reconstruction. This technology completely preserves the true color of the measured object, and is very suitable for digital cultural relics, ancient building surveys, computer synthesis, games, virtual three-dimensional environment, three-dimensional digital product demonstration, archaeological and other occasions with high texture and color requirements. The 24-bit color point cloud data closely combines the object's three-dimensional data information with the surface texture information to maximize the true physical characteristics of the object.  Product numberHL-3DCSensor: resolution (pixels)1,300,000x3 (optional 2 million, 3 million, 5 million pixels)Single measurement accuracy (mm)≤±0.01mmSingle measurement time (S)≤3SMeasuring point distance (mm)0.07~0.4...
      More
  • 3D online inspection system
    • HL-Scan 3D Scanning System
      HL-Scan 3D Scanning System
      Release Time： 2018 - 12 - 10
      Huaguang HL-Scan three-dimensional scanning system can quickly complete three-dimensional detection and reverse engineering application of various size workpieces. It can automatically locate target points without arm or other tracking equipment. It can scan a cross laser beam plus an additional laser beam with a scanning speed of 1340,000 measurements/seconds. It is a plug-and-play system, which can be installed and used quickly without layering point clouds. Automatically generate three-dimensional solid graphics (triangular mesh surface); hand-held arbitrary scanning, portable operation, wide scope of application, scanning in narrow space, no requirements for the working environment.Real-time interaction between multi-function keys and software17.6m³ super large workspace, expandable (dynamic coordinate system can be established)Ignore complex factors such as workshop vibrationNo fixed installation, easy operationIf you don't stick to the point, you can take it and sweep it...
      More
    • Robot automatic three-dimensional online detection
      Robot automatic three-dimensional online detection
      Release Time： 2018 - 11 - 24
      Product technology introductionWith the rapid development of the field of 3D scanning, our company has accumulated nearly 20 years of technology to launch an automated 3D online inspection system. Through the installation of equipment directly on the production line, 3D software measurement technology is used for real-time detection and data feedback, so that the product can better produce guidance. Work, reduce unnecessary losses, save time and production costs, greatly improve production efficiency.HOLON760 Technical Features1. Operational performance safety: man-machine cooperation robot, no need for guardrail, easy to operate.     2. Fully automatic scanning: The whole process from 3D scanning to generating test report can be completed with one click.     3. High data accuracy: accuracy up to 0.015mm, strong resistance to environmental interference.     4. Blu-ray scanning technology: The three-dimensional online detection system adopts ...
      More
  • Anthropometer
  • Desktop level 3D scanner
  • Video Center
  • Product accessories
    • Code point
      Code point
      Release Time： 2016 - 08 - 12
      Special magnetic coding points for HL-3DP 3D photogrammetry:1, with a clear pattern, the boundaries of non aliasing, uniform color and other features, easy to image recognition;2, with the magnetic adsorption function, especially suitable for the three-dimensional measurement of metal parts;3, standard 10 bit 0-99 coding (suitable for small and medium workpiece precision measurement), 12 bit 0-299 coding (larger workpiece three-dimensional measurement, such as: automobile, etc.), 14 bit 0-420 coding (large workpiece, three-dimensional measurement of complex workpiece)
      More
    • Mark point
      Mark point
      Release Time： 2016 - 07 - 27
      3D scanner supplies marking point:1 improve the accuracy of 3D scannerMark point boundary printing is clear, no defect, no tooth defect phenomenon, reduce the scan error, improve the accuracy of 3D scanning data splicing.2 improve the recognition rate of mark pointsThe use of high-grade matte material, the pattern of black and white color information clear, multi angle three-dimensional scanning without reflection phenomenon, no error.3 anti tear, repeated useThe use of high-grade PET, PVC and other materials, to avoid the common paper easy fragmentation, the shortcomings of poor viscosity, can be repeated use.
      More
    • Industrial Box
      Industrial Box
      Release Time： 2016 - 08 - 15
      Special instrument box, special aviation box material, the box according to the size of the equipment, weight and shock absorption and other conditions designed. The external box by multi-layer plywood hard with ABS fireproof plate nail into the bearing capacity and wear resistance, the strong instrument box; with the amount of light, insulation, shockproof, moisture-proof, anti burning, oxidation resistance, sealing function, convenient advantages apparent advantages, body appearance, safe and reliable, easy to maneuver excellent sealing, strong, strong etc..
      More
    • Corner
      Corner
      Release Time： 2016 - 07 - 27
      Because of the high recognition accuracy of the corner marks, the recognition accuracy of the image is widely used in the field of image intelligent recognition.This advanced technology: compared with ordinary circular markers, angular landmark image algorithm is more advanced, can get the accurate mark point center coordinatesBy reducing the errors, reduce misjudgment, greatly improve the precision of data registrationThis corner is a special symbol of fluorescent vlong 3D independent R & D and production of portable 3D laser scanner, there are two different models to meet the different needs of scanning.
      More
    • Tripod stand
      Tripod stand
      Release Time： 2016 - 08 - 15
      A 3D scanner frame: camera type3dscanner tripod stand a professional level, is a company specializing in the design, not only for our Huaguang 3D scanner, but also for the other design features of 3D scanner and a tripod is a work frame with high stability and high strength.A work frame is made of high quality alloy build, with high-end technology, smooth rotation, soft, stable and reliable locking using 3D tripod design, surface through special treatment, use for a long time does not fade.
      More
  • Automobile traffic
    • 3D Scanning Reverse Design of Automobile
      3D Scanning Reverse Design of Automobile
      Release Time： 2020 - 07 - 23
      Reverse design of car body 3D scanningThe development of automobiles is a long process. After continuous improvement, innovation, and higher requirements, it has become a transportation tool with multiple types and specifications that is widely used in various fields of social and economic life. Automobiles have developed and changed rapidly in terms of appearance, performance and color. In every period of the evolution of automobile shapes, new models of automobiles have been continuously developed. In addition to the improvement of automobile performance, automobile aesthetics is also developing. The car body protects safety and constitutes a good aerodynamic environment. A good car body not only brings better performance, but also reflects the personality of the owner. The body shape is...
      More
    • Three-dimensional inspection of automobile inspection mold
      Three-dimensional inspection of automobile inspection mold
      Release Time： 2020 - 06 - 29
      Three-dimensional inspection of automobile inspection moldThe special inspection equipment used by the inspection mold to measure and evaluate the size and quality of the parts, through the online inspection of the parts, thus ensuring the rapid judgment of the quality status of the parts during trial production and start-up production. Therefore, there must be no errors in the dimensions of the inspection mold. Inspection and data comparison are required to avoid errors in the next inspection work and cause trouble for production.Automobile mold scene scanPractical problemsThe customer has high requirements for the inspection of the inspection mold, the scan data is complete and the error is small, the high data accuracy can clearly reflect the problem, and the speed is fast and the work ...
      More
    • Three-dimensional inspection of automobile inspection tools
      Three-dimensional inspection of automobile inspection tools
      Release Time： 2020 - 06 - 24
      Three-dimensional inspection of automobile inspection toolsThe inspection tool is a simple tool for industrial production enterprises to control various sizes of products, improve production efficiency and control quality, and is suitable for mass-produced products. It replaces professional measurement tools and becomes a special dimensional error detection tool. Because it is a detection error tool, it has high requirements for its own design and production, and no large errors can occur, resulting in inaccurate product detection and prone to problems in use. This requires a comprehensive inspection of the inspection tool, comparative analysis of whether there are any defects.Scanning scene of car inspection toolPractical problemsThe customer is an automobile manufacturer, and the inspect...
      More
    • Auto parts reverse design
      Auto parts reverse design
      Release Time： 2020 - 06 - 02
      Auto parts reverse designAutomobile independent brand and technological innovation require parts and components as the basis. Independent innovation of parts and components is also a strong driving force for the development of the vehicle industry. Each part has the importance of existence in the whole vehicle, and it needs to constantly innovate independently. Therefore, it uses 3D scanning technology to collect parts data for processing and product appearance and surface design.Military vehicle renderingsPractical problemsCustomers need to scan more samples, different parts, high scanning accuracy requirements, reduce errors in use, and the completion time is short. Because the traditional scanning method manifests its deficiencies in the operation process, the process coefficient is lar...
      More
    • 3D inspection of automobile cylinder head
      3D inspection of automobile cylinder head
      Release Time： 2020 - 04 - 02
      3D inspection of automobile cylinder headAs society enters industrialization, vehicle usage is getting higher and higher, so the requirements will be higher and higher. The cylinder head is often in contact with high-temperature and high-pressure gas, and therefore withstands large thermal and mechanical loads. The customer wants to scan and obtain the data, detect the quality of the produced automobile cylinder head, and distinguish the key parts of the automobile cylinder head from the defects of the product according to the high-density point cloud data to ensure that the product design fully complies with the processing logic.On-site scan of car cylinder headPractical problemsThere are many curved surfaces of automobile cylinder heads, and the shapes of the grooves on each side are dif...
      More
  • Aerospace
    • Reverse design of aircraft tail
      Reverse design of aircraft tail
      Release Time： 2020 - 05 - 07
      Reverse design of aircraft tailThe tail wing is a device installed at the tail of the aircraft, which can enhance the stability of flight. The tail can be used to control the pitch, yaw and tilt of the aircraft to change its flight attitude. The tail is an important part of the flight control system. It is inevitable that damage will occur during use, so it is necessary to quickly obtain the appearance data of the aircraft tail wing to provide accurate data solutions for later maintenance, repair and transformation.Real shot of the aircraft scenePractical problemsThe customer mainly wants to obtain the data of the aircraft tail, and reverse modeling is performed later. Since the traditional scanning method collects large objects of the aircraft tail, it is impossible to obtain accurate dat...
      More
    • 3D scanning of aircraft blades
      3D scanning of aircraft blades
      Release Time： 2019 - 12 - 17
      3D scanning of aircraft bladesThe thrust of the engine's external letter comes entirely from the thrust generated by the blades. The quality of the blades directly affects the performance of the engine, so it is necessary to pay attention to the quality of the blades. A research institute wants to use 3D scanning technology to scan the produced blades comprehensively, acquire data, and use our equipment to find a fast and suitable solution, which can be used in later design modification operations to improve the quality of the blades and enhance Engine performance.Leaf scan scene mapPractical problemsFor customer needs, high-precision 3D scan data. The blade is made of titanium alloy, the surface is easy to reflect light, the appearance is complex, and dead angles are prone to occur be...
      More
    • Air propeller 3D scanning
      Air propeller 3D scanning
      Release Time： 2016 - 07 - 22
      Three dimensional scanning case of air propellerHigh precision 3D model of a customer needs to get the air propeller, Huaguang engineers use the HL-3DS fast, accurate, obtain the 3D data of the air propeller, and a three-dimensional rendering of 1:1 model in reverse design software UG.Practical problems1 the propeller blade curvature changes, traditional measurement methods can not meet the measurement needs.The middle of the 2 aircraft propeller hub is connected with the blade axis precision parts of the engine, the customer requirements of data accuracy is very high.CO3D solutionAircraft propeller is to rely on the air in the propeller rotation will be the power of the engine to promote the power or lift the power of the device, its quality will determine the safety of the whole aircraft...
      More
    • Fighter turbine blade
      Fighter turbine blade
      Release Time： 2013 - 11 - 30
      Reverse design of turbine blade in fighter jetGuizhou aircraft parts manufacturing enterprises to use 3D scanner to scan Huaguang wear aircraft turbine blade, the blade of turbine blade is the carrier to achieve energy conversion of the fuel gas in the primary factor in determining the performance of a turbine blade, aircraft design requirements are very high.Practical problems1 in view of the complexity of the blade edge curvature, the 3D scanner was used to detect the blade of the aircraft engine.2 the traditional method of measurement data acquisition density is insufficient, because the blade surface is irregular curved surface, and the scanning precision of 3D scanner is very high.CO3D solutionsTurbine blade structure design is complex, tedious process, to complete design of turbine b...
      More
    • Helicopter components
      Helicopter components
      Release Time： 2013 - 11 - 30
      Helicopter accessories three dimensional detection caseUsing 3D Huaguang three-dimensional hand-held scanner HL-3DH-3M, and use Geomagic Qualify to analyze the helicopter parts 3D model and entity to obtain accurate reconstruction model. Thus improving the accuracy of product design, greatly shorten the product R & D design and processing cycle and reduce the cost.Practical problems1, the helicopter is very strict technical indicators of the project, the 3D data accuracy of the helicopter accessories is very high, the overall error control in the 0.02mm.2, the traditional method of measuring data acquisition density is not enough (data deficient) and for the helicopter parts surface and arc can not be measured, unable to detect late nor quality testing and design two times.CO3D solutio...
      More
  • Heavy equipment manufacturing
    • Three-dimensional reverse design of blast furnace chute
      Three-dimensional reverse design of blast furnace chute
      Release Time： 2020 - 08 - 14
      Three-dimensional reverse design of blast furnace chuteDuring the operation of the blast furnace, the charge flows from the material flow regulating valve to the distribution chute through a high drop, and is distributed to various positions of the furnace throat through the interference of the chute. The chute is prone to wear during the production process. Since the customer does not have a design drawing and cannot be repaired later, the 3D scanning technology is used to help obtain the surface data of the object, so that the reverse design can provide effective data assistance for repair and maintenance of wear.Scanning map of chute面临问题| Practical problemsThe chute has a large volume and a complex structure. It scans the required parts according to customer requirements. The details al...
      More
    • Reverse design of agricultural machinery parts
      Reverse design of agricultural machinery parts
      Release Time： 2020 - 05 - 27
      Reverse design of agricultural machinery partsParts are parts or components assembled on machinery. Each part is an important part of machinery and equipment. The lack or wear will affect the use and performance of the product. During the use of machinery and equipment, especially agricultural machinery, the wear rate is fast during long-term labor. Therefore, it is necessary to obtain the data of the accessories, save the data and use it in reverse design, which can provide data support and reduce repair costs.Agricultural machinery scanning scenePractical problemsThe customer purchases agricultural machinery parts and wants to collect three-dimensional data, which can speed up repairs during the repair of parts wear. The shape of the accessories is irregular, the surface has many small f...
      More
    • Three-dimensional inspection of steam turbine
      Three-dimensional inspection of steam turbine
      Release Time： 2020 - 01 - 02
      Three-dimensional inspection of steam turbineSteam turbines are the main equipment of modern thermal power plants. Rotary steam power plants are used in the metallurgical industry, chemical industry, ship power plants, staggered blade rotating rotors. The customer needs to scan the rotating blade rows of the steam turbine for a comparative analysis of the data. Our company's new handheld 3D scanner is used to fully scan a sample to obtain the required data and apply it to the work of a steam turbine to make a better device.Turbine blade scan sceneFacing problemsThe steam turbine has a large volume and a large shape, and the gap between the blade rows is small, which easily forms an included angle. Customers need high scanning data accuracy, good scanning technology, and can complete wo...
      More
    • Three-dimensional inspection of wind turbine castings
      Three-dimensional inspection of wind turbine castings
      Release Time： 2019 - 09 - 11
      Three-dimensional inspection of wind turbine castingsWith the continuous improvement, many aspects need to be improved. Fans are prone to problems under rated conditions. It is necessary to produce and manufacture fans in strict accordance with product standards. In the later stage, proper maintenance and maintenance are required to improve the service life of the fans. Data detection of the fan.Fan casting real shot mapPractical problemsFan castings are bulky and cumbersome, unable to move, complex in structure, large in surface variation, uneven bumps around, and deep holes. On the whole, scanning is very difficult.Using the traditional scanning method and measuring instrument, the internal details of the casting can not be captured clearly, only the outer plane can be scanned, but the l...
      More
    • 3D inspection of super large rigid castings
      3D inspection of super large rigid castings
      Release Time： 2019 - 06 - 20
      3D inspection of super large rigid castingsThe vibrating screen equipment works by the reciprocating rotary vibration generated by the vibration of the vibrator, which produces the multi-spin type vibration of the screen surface. The work is complicated and demanding, and it is easy to wear. It requires daily maintenance and regular maintenance and overhaul to ensure production. The normal operation. A domestic customer needs to carry out three-dimensional inspection of the vibrating screen equipment. As the world's second largest casting, the vibrating screen is large and high. Scanning is a big project. After the customer has learned the data obtained by the Hualang 3D scanner. I feel very satisfied and purchase equipment.Super large casting site real shotPractical problemsBecause th...
      More
  • New energy
    • Wind blade 3D inspection
      Wind blade 3D inspection
      Release Time： 2020 - 09 - 09
      Three-dimensional inspection of wind bladesThe design of the blades in a wind turbine can directly affect the efficiency of wind energy conversion. Good design, reliable quality and superior performance are the decisive factors to ensure the normal and stable operation of the unit. It directly affects its annual power generation and is an important part of wind energy utilization. 3D scanning technology is used to quickly obtain 3D data of the inspection position of the blade, and through data analysis and comparison, we can understand the existence of the problem and make timely maintenance to ensure the operation of the work.Site scanPractical problemsThe customer needs to check the size of the outer ring of the blade root to check the amount of deformation. And it requires high precisio...
      More
    • Gas turbine inspection and scanning
      Gas turbine inspection and scanning
      Release Time： 2020 - 05 - 06
      Gas turbine inspection and scanningA gas turbine is an internal combustion power machine that uses continuous flowing gas as a working substance to drive an impeller to rotate at high speed and convert the energy of fuel into useful work. It is a rotary impeller heat engine. Combustion chambers and turbines have high operating temperatures and also withstand the thermal shock caused by dramatic temperature changes during gas turbine start-up and shutdown, so they are the key components that determine the life of the gas turbine. It is necessary to scan and obtain data analysis on the arc section of the steam turbine to improve work efficiency, and the use of automated three-dimensional measurement can provide a suitable solution.Real shot of gas turbine sitePractical problemsThe gas turbin...
      More
    • 3D inspection of petroleum drill bits
      3D inspection of petroleum drill bits
      Release Time： 2020 - 04 - 23
      3D inspection of petroleum drill bitsPetroleum drill bits are an important tool for petroleum drilling. They are used to drill oil when it is extracted. The quality of its working performance will directly affect the drilling quality, drilling efficiency and drilling cost. The tooth face of petroleum bricks is prone to wear during use, and the degree of wear and tear will also have different effects on the later exploitation of oil. Therefore, customers need to understand the situation of oil bit detection and analysis, and use a three-dimensional scanner to scan and obtain data.Real shot of oil drill sitePractical problemsThe structure design of the tooth surface of the oil drill bit is complicated, with grooves. Since the oil drill is an important tool for oil drilling, it can have a dir...
      More
    • Impeller scanning reverse design
      Impeller scanning reverse design
      Release Time： 2020 - 02 - 20
      Impeller scanning reverse designImpeller refers to the wheel disc with moving blades, and it can also refer to the collective name of the wheel disc and the rotating blades mounted on it. The unevenness of the gas flow inside the impeller is easy to accelerate wear. In order to reduce the entry of corrosive gas and improve the wear resistance of the impeller, the design and materials can be modified. Customers find our company and hope to obtain data through our three-dimensional scanning technology for comparison and use in later work.Impeller physical mapPractical problemsThe overall outline of the impeller is complex, and the blade part is prone to cause dead angle shadows. The customer needs to be able to accurately measure the data of the impeller. The accuracy is high, but the scanni...
      More
    • Three dimensional detection of wind turbine blades
      Three dimensional detection of wind turbine blades
      Release Time： 2016 - 07 - 22
      Three dimensional detection of wind turbine bladesWind turbine blade design directly affects the conversion efficiency of wind energy, which directly affects the annual power generation, aerodynamic performance of the airfoil with a better aerodynamic performance of the airfoil and aerodynamic analysis. The airfoil is the aerodynamic shape of the blade, which directly affects the utilization of wind energy. Airfoil has the advantage of high lift coefficient and lift drag ratio under design conditions, and has good performance in the non design conditions. Wind blade 3D scanning spot Practical problems 1 for the detection of wind turbine products, the use of traditional measurement tools can not be effective measurement of wind blades.2 wind blade surface curvature is larger,...
      More
  • Ship engineering
    • Ship engine detection
      Ship engine detection
      Release Time： 2016 - 07 - 22
      Ship engine detectionAnalysis of full size surface 3D engineers use 3D scanner Huaguang HL-3DW can be generated on a ship engine, a detailed test report, any position deviation can also display the numerical value of.Practical problems1, the ship engine shell size 2m*0.8m*1m, curved surface, assembly position very much, in addition to improve the measurement efficiency, and shorten the measurement time, the measurement accuracy will be well controlled, global measurement accuracy within 0.1mm2, with the traditional measurement method to obtain the ship engine housing data is insufficient, can not be carried out two times the design and product quality inspection.CO3D solutionsIs a leading Foundry Company in large castings industry veteran of the company, the traditional engine measurement ...
      More
    • Kayak model reverse detection
      Kayak model reverse detection
      Release Time： 2016 - 09 - 10
      Large canoe reverse scan modelKayak models up to four meters, scanning the difficulty coefficient is big. Through the analysis of 3D Technology Engineer Huaguang scanning, 3D scanner using HL-3DW technology, 3D data can only get forty minutes time kayaking model, the accuracy of the 0.1mm.Practical problems1, the traditional method of measuring data acquisition density is not enough (data deficient) and the surface model and the radian of canoeing can not be measured, unable to detect late nor reverse mapping.2, kayak model 4.0m long, general 3D scanner scanning format is small, large objects when the cumulative scanning area too much, can not find and so on logo stitching. Generate a large amount of work, low efficiency, and the accuracy of the data can not reach the customer demand.CO3DS...
      More
  • Electronic appliance
    • Camera scan
      Camera scan
      Release Time： 2020 - 09 - 11
      Camera 3D scanningA camera is a device that uses optical principles to record images. In the early days of the invention, the camera was mainly used for the production of movies and TV programs, but now it has become popular and easy to carry, and it has almost become an essential electrical appliance in daily life. Now it is necessary to display the camera on the Internet and use 3D scanning technology to obtain the display data.Site scanFacing problems | Practical problemsThe customer needs data modeling for display, so the data accuracy is very high, it can fully show the advantages of the camera in all aspects, and reflect the real feeling to the user. Use the latest 3D scanning technology to obtain data. In the past, the data obtained by scanning equipment was not very accurate and wa...
      More
    • 3D inspection of automated production line
      3D inspection of automated production line
      Release Time： 2020 - 05 - 28
      3D inspection of automated production lineThe automated machine system brings great convenience. It is used in conjunction with robots for path planning. Good path planning is the key to affecting the efficient operation of the robot production line. On the basis of pre-judging the robot working path, by establishing a robot space coordinate system, The method and influencing factors of the robot's initial pose and optimal path selection are analyzed. Check whether the robot path planning method meets the actual production requirements.Real production diagram of automated production linePractical problemsBecause it is for path planning, it has high requirements on all links of the automated production line. It can be used in conjunction with the robot to avoid errors. Therefore, it req...
      More
    • Coil 3D scanning
      Coil 3D scanning
      Release Time： 2020 - 03 - 31
      Coil 3D scanningA coil usually refers to a wire winding in a toroidal shape, which is a guide wire that is wound one by one, the wires are insulated from each other, and the insulation tube may be hollow, or it may include an iron core or a magnetic powder core. The inductance of the coil is related to the presence or absence of a magnetic core. Inserting a ferrite core into an air-core coil can increase the inductance and improve the quality factor of the coil. Customers want to obtain accurate coil data and apply it to automated equipment to automatically identify data for screening.Coil live scanPractical problemsThe overall volume of the coil is small, and the winding wire is thin, and the wire is wound around the insulation tube one by one. There are many details in scanning. Using tr...
      More
    • 3D scanning of foamed film
      3D scanning of foamed film
      Release Time： 2019 - 12 - 19
      3D scanning of foamed filmA manufacturer needs to perform a three-dimensional scanning of the foamed film for comparison, to adapt to the development of the society, and make better improvements in order to accelerate the production of later models. We find that our company uses new scanning equipment to scan to obtain high-precision 3D data, which can solve the problems that customers currently face, improve quality, increase production, expand the market, develop new customers, and cooperate with long-term customers for a long time.Scanning scene of foam filmPractical problemsThe surface of the sample that the customer needs to scan is irregular and uneven, and the details need to be scanned completely. The groove part is reflected, and the device needs to have a strong capture ability.S...
      More
    • Air conditioning pipeline three-dimensional inspection
      Air conditioning pipeline three-dimensional inspection
      Release Time： 2019 - 11 - 22
      Three-dimensional inspection of air conditioning pipelineAir conditioning is an indispensable electrical appliance in the interior, especially in the summer, the usage rate is extremely high, and the annual demand is also increasing. A certain manufacturer of air conditioners has found that we want to use 3D scanners to scan and test the air conditioning components, and obtain accurate data for later design and production, so that the overall design is more reasonable, enhance the competitiveness of air conditioners in the market, and improve sales. the amount.Air conditioning pipeline site scanPractical problemsIt is necessary to measure the size and parallelism of the air conditioning pipe to compare the previous data to see if there is any deformation. According to the overall assembly ...
      More
  • Mould testing
    • Screw scan
      Screw scan
      Release Time： 2020 - 08 - 19
      3D scanning of screwsThe main function of the screw is to connect the two workpieces together for fastening. Screws are used in almost all machines. The screw itself is metal, which is easily corroded by acid and alkali or rust, which affects the performance and aesthetics of the screw. Therefore, the screws are often coated with a coating to prevent corrosion. The three-dimensional data of the surface of the screw is obtained with the aid of three-dimensional scanning technology to calculate the surface area of the screw.Site scanFacing problems | Practical problemsThe size of the screw is small, and the thread gap is also small. To complete high-precision scanning, the three-dimensional scanner used has high requirements and can accurately obtain the scanned data. If a fixed scanner is u...
      More
    • 3D scanning of plastic parts
      3D scanning of plastic parts
      Release Time： 2020 - 08 - 13
      3D scanning of plastic partsPlastic parts are widely used and are replacing traditional metal parts in different fields to achieve the goal of simplifying product structure and saving manufacturing costs. While demand increases, the speed of production must also be accelerated. With the development of 3D scanning technology, it is widely used and can scan to obtain object data for later design changes, product development, and speed up production efficiency.Site scan面临问题| Practical problemsThe structure of scanning plastic parts is complicated, the surface has holes, and the corners are easy to form dead corners. Customers require that they cannot be sprayed and applied. The scanning work can be completed quickly and the scanning data accuracy is high. Using the traditional scanning method...
      More
    • 3D inspection of machined parts
      3D inspection of machined parts
      Release Time： 2020 - 07 - 16
      3D inspection of machined partsThe processed parts are the workpieces produced by the mechanical processing technology, and are easily deformed during the manufacturing process. Therefore, the processed parts need to be inspected to control the product quality of each process and improve the product quality. Object data can be analyzed and compared. The customer wants the 3D scanning technology to scan and obtain the data of the processed parts for inspection.On-site scan of processed partsOn-site scan of processed partsPractical problemsCustomers need to find complete scanned high-precision data, and the data analysis effect is good, which can clearly show the problem. The customer had previously found a 3D scanning manufacturer to demonstrate the results. The accuracy of the scanned data...
      More
    • Three-dimensional reverse of plastic products
      Three-dimensional reverse of plastic products
      Release Time： 2020 - 06 - 08
      Three-dimensional reverse of plastic productsPlastic products are a general term for life, industry and other articles processed by using plastic as the main raw material. Since there is no original design drawing, it cannot be repaired and redone during the later damage process. Therefore, customers want to adopt new three-dimensional scanning technology, collect plastic product data for reverse design, and later model or design redo.Real shot of plastic handle scenePractical problemsFor customers to reverse design plastic products, the data accuracy is required to be high, and good data can be used for later repair or redesign to make good results. Plastic products are transparent and curved.Plastic handle STL data chartThe traditional scanning method has certain scanning difficulty, and...
      More
    • Three-dimensional fence inspection
      Three-dimensional fence inspection
      Release Time： 2020 - 05 - 14
      Three-dimensional fence inspectionFence is a net made of iron wire, which has many uses. The thickness of the wire and the density of the wire are different. In the use of fence nets, customers need to understand the area and density of fence nets, and they need to use objects in the later stage to perform effective data analysis and adjustment, find gaps in time, solve problems as soon as possible, and improve work efficiency.Fence net real shot mapPractical problemsThe fence mesh has a small density and a fine mesh surface. The customer requires calculating the area and measuring the density. The scanned data is complete and the accuracy is high, which requires high scanning equipment. Using traditional manual measurement, the measured density is inaccurate, the calculated area is incomp...
      More
  • Educational equipment
    • Hard hat reverse design
      Hard hat reverse design
      Release Time： 2020 - 04 - 16
      Hard hat reverse designA hard hat refers to a hat that protects a person's head from damage caused by falling objects and other specific factors, and is composed of a shell, a cap lining, a chin strap, and accessories. Each helmet has certain technical performance and scope of application. As a safety protection, it has great requirements on the quality of the materials used and the rationality of the design. Manufacturers require scanning helmets to do reverse modeling and make corresponding changes to design improvements.Hard hat scanning scenePractical problemsThe helmet shell has a large radian and holes around it. It is not accurate enough to obtain data using traditional scanning methods. It is impossible to perform a complete measurement of the curvature of the surface, so it ca...
      More
    • 3D scan of Venus sculpture
      3D scan of Venus sculpture
      Release Time： 2020 - 01 - 10
      3D scan of Venus sculptureVenus sculpture is an art treasure, carved by hand with a knife. Carving sculptures by hand is a long and large amount of work, and it is difficult to control the accuracy of details. Therefore, it is difficult to rely on hand carving for mass production. The 3D scanning technology can be used to open the mold to make it meet the needs of the public. This can not only speed up production efficiency, but also save labor costs, and it has high accuracy.Venus live shotPractical problemsThe surface texture of Venus sculpture is remarkable. It is a humanoid sculpture with obvious features and pleats. Both the posture and the posture have the power of God. Customers need to have a high degree of restoration and high scanning accuracy, which meets the needs of the market...
      More
    • 3D scanning of mannequins
      3D scanning of mannequins
      Release Time： 2019 - 12 - 20
      3D scanning of mannequinsChina's clothing production and export has been ranked first in the world for more than a decade, and plastic fashion clothing model props have also been 100% domestically produced. On the other hand, mannequins are a necessary means to assist art workers in improving their modeling capabilities. The production of mannequins requires specific and accurate three-dimensional data in order to produce products that meet the requirements. A three-dimensional scanner is required to scan the mannequins. The desired data can be quickly and accurately obtained and put into batch production for production.On-site scans of mannequinsPractical problemsAccording to the needs of customers, a three-dimensional digital model of a mannequin needs to be obtained quickly. The tex...
      More
    • Gastroscope handle reverse detection
      Gastroscope handle reverse detection
      Release Time： 2019 - 11 - 21
      Gastroscope handle reverse detectionGastroscope is a medical device, which has high quality requirements and is reasonable in all aspects. In order to design a more competitive gastroscope handle, the manufacturer uses a new measurement method to scan the gastroscope handle for reverse detection. Or where there are defects, the appearance and details of the gastroscope handle can be improved more rationally, and the production efficiency and product quality can be improved.Gastroscope handle site scanGastroscope handle site scanPractical problemsThe gastroscope handle performs three-dimensional scanning for reverse detection, and the customer has high precision on the scanning data. The handle of the handle is complex in structure, has various operational functions, and requires high detai...
      More
    • 3D scanning of human legs
      3D scanning of human legs
      Release Time： 2019 - 11 - 14
      3D scanning of human legsThe human body three-dimensional scanner is a non-contact automatic measurement of three-dimensional human body surface contours by using optical measurement technology, computer technology, image processing technology, digital signal processing technology, and the like. By utilizing the advantages of optical three-dimensional scanning and the harmlessness of white light to the human body, the human body can be scanned in a short time, and then automatically decomposed by software to obtain accurate and complete human point cloud data. A domestic hospital wants to use this technology for human body scanning, which can be used in later medical work.Human leg scan scene mapPractical problemsDuring the scanning process, the scanned body needs to maintain a posture and...
      More
  • Automobile traffic
    • Automobile reverse design
      Automobile reverse design
      Release Time： 2016 - 08 - 10
      By a well-known car company commissioned to scan the vehicle's three-dimensional data, optimize the performance of the car. In the understanding of the actual situation, Hualang 3D technology engineers use 3D Photogrammetry System HL-3DP + 3D scanner HL-3DW, quick access to car body and wheel arch data, optimization of drag racing.The use of traditional methods not only spend a lot of time and huge investment, can not meet the actual requirements of the team. D according to the problems faced by the team, the proposed solution used in the solution: three-dimensional Photogrammetry System (HL-3DP) + 3D scanner (HL-3DW) to obtain the car body and wheel arch data. The car gets out of the car after the appearance of manufacturing data model wind tunnel experiment, test the drag coefficient...
      More
    • Reverse engineering - Parts Market
      Reverse engineering - Parts Market
      Release Time： 2016 - 08 - 22
      HuaGuang 3D The advantages of the solutionReverse engineering requires the acquisition of components with a variety of shapes and complexity, and may be required to be measured in any type of environment. Due to its excellent portability, 3D HuaGuang can be collected directly in the design studio, can also be collected at the customer site, such as production sites (even in small car body shop).Since the designer wants to rebuild the functional design of the parts, the collection must be accurate and can provide all the information necessary to rebuild the new reference model for the parts to be manufactured. 3D HuaGuang will provide a complete and accurate mesh model.Compared with the traditional measurement methods, 3D HuaGuang solution can help save a lot of time. The necessary reverse ...
      More
    • A prototype of auto parts detection
      A prototype of auto parts detection
      Release Time： 2016 - 09 - 09
      HuaGuang 3D The advantages of the solution　　A prototype of the automotive industry in the detection of collection of a variety of appearances and the complexity of the size of the components, and may need to be measured in any type of environment. Due to its excellent portability, 3D HuaGuang can be implemented in the metrology laboratory collection, can also be in the customer's work site (for example, the production site or supplier) for collection.The inspectors wish to use digital model to assess the actual component, so the acquisition must be accurate and complete 3D model must include all the information needed to detect. 3D HuaGuang will provide a complete and accurate mesh modelCompared with the traditional measurement methods, 3D HuaGuang solution can help save a lot of time....
      More
  • Aerospace
    • Quality control / detection
      Quality control / detection
      Release Time： 2016 - 08 - 15
      Rapid measurement, the overall size of the detection time of large workpieces such as aircraft tail in 1 hours, time measuring parts of small workpieces such as aircraft or even less than 15 minutes; in view of the quality of aviation products extremely demanding and the shape size and surface complexity are not the same, the 3D scanning system can detect aircraft parts. First scan of the parts, due to the use of non-contact scanning for complex curved surface parts soft and easily broken, unable to reach parts of the probe can easily scan, reduce the scan time of the workpiece to complete, compared with the CAD model, the color encoding error chart shows the deviation and deviation, CAD data is given for correction.All parts of the production line need to be verified by 3D, which can be r...
      More
    • Aerodynamics and stress analysis
      Aerodynamics and stress analysis
      Release Time： 2016 - 08 - 12
      Thrust - before the aircraft began to move, the thrust must be applied. The aircraft continues to move, the speed increases until the thrust and resistance are equal. In order to maintain a constant airspeed, like lift and gravity must be equal in order to maintain a stable flight altitude, thrust and resistance must be equal. Assuming that in the straight flight, the engine power is reduced, the thrust will fall, the aircraft speed will slow down. As long as the aircraft would have been less than thrust resistance, slow down, know that it is not enough to support the flight airspeed. 1.Mold / model 3D scanA preliminary air flow analysis for the following types of components to the CFD model:A. wingB. bodyC. hoodD. exhaust mixerE. external storage tankF. through the CAD application to...
      More
    • Repair and maintenance
      Repair and maintenance
      Release Time： 2016 - 08 - 15
      The use of aircraft to scan data can be compared to the damage after the body, more intuitive to see the site of injury, can provide the most reasonable direct repair scheme of aircraft damage, improve the safety of the aircraft, can also evaluate the quality of the repaired parts, whether can give accurate judgment to take off again. Aircraft maintenance can also through comparison, more intuitive to see the deformation or displacement of parts, these parts previously indistinguishable to the naked eye easily scan out of repair, make the detection process more complete. Data can also be stored in a permanent document, to provide a more solid theoretical basis for the subsequent repeated repairs.A. damage assessmentB. for the renovation of part of the consistency assessment to modify the m...
      More
  • Heavy equipment manufacturing
    • Detection of rough castings and forgings
      Detection of rough castings and forgings
      Release Time： 2016 - 08 - 13
      HuaGuang 3D The advantages of the solution　　Detection of castings and forgings requires the acquisition of various shapes and sizes of the components of the complex, the acquisition process may be performed in any type of environment. With its excellent portability and multi functionality, 3D HuaGuang can be directly in the foundry, the customer's housing, production sites or suppliers to perform any part of the collection.Quality inspection personnel or operating personnel usually need to use the corresponding digital models of physical components to assess their. Therefore, the collected data must be accurate, and the 3D model must contain all the information needed to complete the test.3D HuaGuang will provide a complete and accurate mesh model. Compared with the traditional measure...
      More
    • Industrial equipment spare parts development
      Industrial equipment spare parts development
      Release Time： 2016 - 08 - 13
      Because all of our proprietary products are based on the foreign advanced technology, whether to scan vehicles or parts size, regardless of whether there is around the dirt, dust, wind, temperature or other extreme conditions, can provide reliable and highly accurate measurement data.Before designing an agricultural, construction or mining equipment spare parts, the designer must extract the dimensions of the vehicle or equipment. In order to ensure good coordination and performance, the dimensions must be accurate and complete.
      More
    • Detection of rough castings and forgings
      Detection of rough castings and forgings
      Release Time： 2016 - 08 - 13
      HuaGuang 3D The advantages of the solutionDetection of castings and forgings requires the acquisition of various shapes and sizes of the components of the complex, the acquisition process may be performed in any type of environment. With its excellent portability and multi functionality, 3D HuaGuang can be directly in the foundry, the customer's housing, production sites or suppliers to perform any part of the collection.Quality inspection personnel or operating personnel usually need to use the corresponding digital models of physical components to assess their. Therefore, the collected data must be accurate, and the 3D model must contain all the information needed to complete the test.3D HuaGuang will provide a complete and accurate mesh model. Compared with the traditional measureme...
      More
  • New energy
    • Analysis of power generation turbine components
      Analysis of power generation turbine components
      Release Time： 2016 - 09 - 09
      Turbine component analysis　　HuaGuang 3D The advantages of the solution　　Turbine component analysis may require the acquisition of arbitrary shape and complexity of the parts in an unstable environment. In addition, parts are usually located in the hard to reach position. Due to its excellent portability, compact size and built in the parts of the coordinate system function, even if you need to scan directly in the spiral case, 3D HuaGuang can also be directly on the turbine device to perform the collection.Because the quality of the turbine components is critical to a good working condition, the acquisition must be accurate and include all the information needed to assess the status or to create a complete 3D dimensional model. 3D HuaGuang scanner is an ideal equipment to provide a complet...
      More
    • Power generation and energy industry testing 3D modeling
      Power generation and energy industry testing 3D modeling
      Release Time： 2016 - 08 - 12
      Whether it is the reverse process, detection, repair or transformation of power generation components, 3D HuaGuang to provide reliable, advanced portable 3D measurement technology for the power market. Small spaces and difficult to access components are no longer a problem, because of its well-known portability and small size makes them available in any place to collect measurement data. Our data accuracy is among the best in the market, while TRUaccuracy technology ensures the stability of the measurement setup, so that the device can be measured in an unstable environment
      More
    • Solutions for New Energy Wind and Power Industry
      Solutions for New Energy Wind and Power Industry
      Release Time： 2019 - 05 - 17
      Huaguang 3-D is based on the frontier of industrial 3-D measurement technology. It devotes itself to the 3-D digital manufacturing of industrial products. It develops and manufactures photographic 3-D scanners, hand-held 3-D laser scanners, 3-D photogrammetry systems and 3-D motion capture systems. Main applications: reverse engineering, three-dimensional detection, three-dimensional printing and product three-dimensional digitization and other fields.Huaguang 3D brings you:Scanning data integrity (large-scale comprehensive scanning, accurate acquisition of complete three-dimensional data)Because the scanned workpiece in energy equipment is often large and difficult to move. It is difficult to obtain complete and accurate data by using traditional measurement methods.Three-dimensional scan...
      More
    • Analysis of wind turbine blade components
      Analysis of wind turbine blade components
      Release Time： 2016 - 08 - 12
      We selected material and process design, wind turbine blades, are the main factors determining the wind power device performance and power, affect the unit cost of wind power generation, in order to improve the efficiency and reduce the cost of the fan two factors, making positive development of large leaves. Generally speaking, wind blade length of a few meters, or even tens of meters, so large in size, with little or no previous measuring equipment suitable for 3D measurement can be performed on it, that is to use laser total station 3D measurement, 3D data also just get the key points, slow measurement speed and low accuracy.1 scanning data integrity (large scale comprehensive scanning, accurate access to complete three-dimensional data)The workpiece is often large and difficult to move...
      More
  • Ship engineering
    • Application of 3D scanner in ship engineering
      Application of 3D scanner in ship engineering
      Release Time： 2016 - 09 - 10
      Ship engineering is the concentrated embodiment of the advanced manufacturing technology. Measurement, whether it is for the mapping of components, or parts of the test, does not allow any error, the measurement of the requirements can be used to describe the harsh. In the process of manufacturing, weight loss and safety is the ultimate goal of two, the requirements continue to optimize the component design and material performance, so lightweight, integrated.Ship engineering domain detection of parts of the past more than the use of contact, such as the three coordinate measuring machine, special measuring tools, the use of the method of measuring parts of the surface shape. The efficiency of this method is not high, it is affected by human factors, and it is easy to go wrong, there are s...
      More
    • Marine engineering industry
      Marine engineering industry
      Release Time： 2016 - 08 - 15
      Ship and ocean engineering structures, the design and development of submersible underwater, the main research areas are: Marine Engineering and other kinds of structural strength, stiffness, fatigue, vibration and structural reliability; marine hydrodynamics; ship resistance, propulsion, stability, maneuverability and seakeeping. Some of the research achievements in China have reached the international level. Marine engineering is mainly research on the principle of ship machinery and application, with the continuous development of information technology, the application of radar and remote sensing technology, improve environmental protection requirements and more efficient use of energy, power equipment, electrical equipment, ship engine automation systems are facing new challenges and t...
      More
  • 师资队伍
    • 荣誉高级教师--（ADAWONG）
      荣誉高级教师--（ADAWONG）
      Release Time： 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国，英国，加拿大，澳洲，新西兰）·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证知名师范院校外语系师范专业毕业，毕业以来就一直从事小学、初中的教学和研究工作，6年的任教经验，特别是一年国际学校任教的经历，让我对中、外的小学生的语言学习有了更多的认识；在我的课堂中，学生的兴趣始终是我关注的出发点； 另外，语言不仅是一门语言，同时也是一种文化；更难得是的思维习惯的养成；我喜欢活跃互动的课堂形式，有趣的课堂形式利于提高学生的学习积极性，同时我也很喜欢教授学生掌握解题的关键，各类口诀梳理语法重难点是掌握的捷径！
      More
    • 荣誉高级教师--（LINDA）
      荣誉高级教师--（LINDA）
      Release Time： 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国，英国，加拿大，澳洲，新西兰）·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证        Hello，我是LINDA，毕业于广州著名学府的英语教育专业，擅长地道的口语教学，多年的口语教学经验告诉我，口语学习必须要大胆开口说，英语是一种语言，重要的是懂得如何交流和沟通。流利的口语更可以提高语感，有助于更容易学习英语。我喜欢活跃互动的课堂形式，有趣的课堂形式利于提高学生的学习积极性，帮助你找到适合自己的英语学习方法、掌握解题的关键，独特而有个性的教学风格是我的课堂。
      More
    • 荣誉高级教师--（Sammi）
      荣誉高级教师--（Sammi）
      Release Time： 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国，英国，加拿大，澳洲，新西兰）·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证最受学生欢迎的英语女神。 教学成绩：2013年获评明师教育最受学生喜爱女教师金奖； 2014年班均人数、带班量居英语科头名，并创下英语科目班均人数最多纪录； 曾参加高考口语，一模口语评卷工作，英语口语界权威代表。 教学特点：10年丰富的教学经验，执教高三保证班超过6年。自创语法填空（Grammar）稳夺8空技巧，小作文首句法，20分钟高分大作文速成法，助你挑战速度极限。2013年以来Sammi所带的班期期爆棚，人数居高不下，被学生奉为英语女神。
      More
    • 荣誉高级导师--（Pow）
      荣誉高级导师--（Pow）
      Release Time： 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国，英国，加拿大，澳洲，新西兰）·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证        拥有全国认可的英语专业最高等级证书---TEM-8,极具英语权威。刻苦钻研Task-based Language Teaching(TBLT)教学法，熟练掌握Reading, Speaking, Listening, Writing课堂教学技能，在教坛凭借新颖教学方法，获得家长和学生一致好评，获得“最佳教师奖”。 “3P”魅力(Professional, Passionate, Patient)专业+热情+耐心=100% 魅力 Rachel执教的英语课堂生动有趣
      More
    • 荣誉高级导师--（Sarah）
      荣誉高级导师--（Sarah）
      Release Time： 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国，英国，加拿大，澳洲，新西兰）·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证经验丰富·考点明确：Sarah具有丰富的教学经验，长期担任明师初中英语教材组成员，负责各大名校试卷分析工作，熟知初中各年级英语考点，提炼各类“易错题”、“高频题”;善于归纳解题方法和构建、整理知识结构体系;同时擅长针对考试题型演示解题方法，炮制最适合学生的“抢分秘笈”。 幽默课堂·轻松学习：Sarah以独特的“栋笃笑”风格，打造具有个人特色的幽默课堂，为学生们提供轻松、愉悦的学习环境。对于初中英语较难的知识点，Sarah善于以生动有趣的例子诠释，加速学生的理解及记忆。
      More
  • 下载中心
    • LED单元板
      LED单元板
      Release Time： 2013 - 12 - 02
      电器企业将转战三、四级市场家器产品的销售主要集中在城市一、二级市场，三、四级市场潜在需求还没充分挖掘。一、二级市场竞争激烈，必然伴随着运营成本的提高，缩小了利润空间。而在稳定发展的经济大环境下，消费水平和消费能力的日渐形成，三、四级市场会日渐启动。电器企业必将加速转战三、四级市场的步伐。产品的系列化、渠道的多样化、人员的素质化、营销的战略化是企业全面攻占新市场必不可少的战略武器。电器企业必须不断地增强多元化的综合竞争力。
      点击下载
    • LED条屏，车载屏
      LED条屏，车载屏
      Release Time： 2013 - 12 - 02
      LED车载屏是安装在车上的，使用专用电源供电，通过控制卡接收、输出数据给点阵LED单元板，通过控制点阵的亮灭显示文字、图片、动画、视频的设备。一般有出租车、公交车、警车安装LED车载屏。它是随着LED显示屏的迅速发展而独立出来的一套LED车载显示系统，与普通的门头屏、固定不移动的LED显示屏相比，它对稳定性、抗干扰性、防震动、防尘等方面的要求更高。迅灵车载屏在各个方面都有严格的把控、对产品的要求更高。
      点击下载
Top
X-Sacan
X-Sacan
年化收益： 项目期限： 项目规模：
0 个月 0 万
发布Date： 2018-11-22 还款Date： 2018-11-22
担保机构：
还款方式：

product information

product information

   -------------------------------------------------- -----------------

    Product Name: Handheld color 3D scanner


    Product model: X-Scan


    Product size: 310 × 147 × 80mm


    Product light source: white LED (speckle scan)


    Data accuracy: up to 0.05mm


    Scanning area: 0.15×4.0m

   -------------------------------------------------- -----------------


    Product Name: Handheld color 3D scanner


    Product model: X-Scan


    Product size: 310 × 147 × 80mm


    Product light source: white LED (speckle scan)


    Data accuracy: up to 0.05mm


    Scanning area: 0.15×4.0m
  • Introduction
  • Specification
  • Application
  • Accessories
  • Video
  • Customer

Product technology introduction

My company X3DS The latest development of X-scan multi-function handheld color 3D scanner, using the latest handheld design, light weight, easy to carry; ready to use; dual industrial camera, can quickly capture 3D data of real objects, no need to paste, spray Powder processing is truly intelligent, portable, high-precision, non-contact color scanning, etc. This product has been widely used in reverse engineering and color cultural relics, 3D printing, education and scientific research.


X-Scan technical features  　

1. Various scanning modes: support both handheld and fixed scanning modes;

2, real-time color scanning rendering, high color reproduction;

3, plug and play system, convenient for quick installation and use;

4, no need to paste, dusting, automatic splicing, especially for human and cultural antiques scanning.

5, with light weight, flexible carrying, easy to operate, etc. can be used in a variety of complex scenes

6, the equipment is simple to operate, easy to learn and use, free from environmental impact, workpiece structure and user capacity constraints


X-Scan

X-Scan

X-Sacan


Product numberX-Scan
Scanning accuracyUp to 0.1mmUp to 0.05mm
It is recommended to scan the object size0.15-4.0m0.03-0.25m
Positioning methodFeature splicingTurntable splicing, feature splicing, marker positioning
Measurement rate550,000 measurements/secondSingle scan time<2s
Resolution0.1mm
Texture mapping accuracy1 pixel
Texture resolution1.3MP
colour24BPP
Frame rate10FPS~16FPS
light sourceWhite LED
transfer methodUsb3.0/2.0
System SupportWin7 (64bit) Win10 (64bit)
Scanning area250×185mm
weight0.56 kg
size310×147×80mm
Depth of field200mm
Reference distance400mm
transfer methodUSB3.0
Operating temperature-20~40°C
Operating humidity (non-condensing)10~90%
Output format.stl, .obj, .asc, .ply, .txt, .xyz, etc., can be customized.
Compatible software3D Systems（Geomagic Solutions）、InnovMetric Software（PolyWorks）
Dassault Systems（CATIV V5和SolidWorks）、PTC（PRO/ENGINEER）
Autodesk（inventor、Alias、3ds max、Maya、Softimage）
Siemens（NG和Solid Edge）

X-Scan

X-Scan

X-Scan

X-Scan

Demand feedback
Customers can make service requests to the company through effective communication methods such as telephone and mail. We will respond within 2 hours and propose solutions within 24 hours.


Equipment Repair

Our company responded to customer questions in the first time after receiving the product failure notice. After the effective communication methods such as telephone and mail can not rule out the equipment failure, and the problem is determined as the cause of the equipment, our company assigns technicians to the site for maintenance.

China Optical Three-dimensional Tian Jin  Technology Co.，Ltd

Tel: 86-022-59002803 59002807 59002817 59002805

Fax: 86-022-59002805

Tel: 17720035950

Address: 3rd Floor, South Building, Tianda Science and Technology Park, No. 80, Fourth Avenue, Tianjin Economic and Technological Development Zone

X-Sacan


Product numberX-Scan
Scanning accuracyUp to 0.1mmUp to 0.05mm
It is recommended to scan the object size0.15-4.0m0.03-0.25m
Positioning methodFeature splicingTurntable splicing, feature splicing, marker positioning
Measurement rate550,000 measurements/secondSingle scan time<2s
Resolution0.1mm
Texture mapping accuracy1 pixel
Texture resolution1.3MP
colour24BPP
Frame rate10FPS~16FPS
light sourceWhite LED
transfer methodUsb3.0/2.0
System SupportWin7 (64bit) Win10 (64bit)
Scanning area250×185mm
weight0.56 kg
size310×147×80mm
Depth of field200mm
Reference distance400mm
transfer methodUSB3.0
Operating temperature-20~40°C
Operating humidity (non-condensing)10~90%
Output format.stl, .obj, .asc, .ply, .txt, .xyz, etc., can be customized.
Compatible software3D Systems（Geomagic Solutions）、InnovMetric Software（PolyWorks）
Dassault Systems（CATIV V5和SolidWorks）、PTC（PRO/ENGINEER）
Autodesk（inventor、Alias、3ds max、Maya、Softimage）
Siemens（NG和Solid Edge）
Automobile traffic
案例名称： Automobile traffic
说明：

Aerospace
案例名称： Aerospace
说明：

Heavy equipment manufacturing
案例名称： Heavy equipment manufacturing
说明：

New energy
案例名称： New energy
说明：

Ship engineering
案例名称： Ship engineering
说明：

Electronic appliance
案例名称： Electronic appliance
说明：

Mould testing
案例名称： Mould testing
说明：

Educational equipment
案例名称： Educational equipment
说明：

Hot Products / 热卖产品
HOLON751
HOLON751
2019 - 11 - 02
Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, Huaguang handheld 3D laser scanner technology leading, this product has been w...
More
HOLON760
HOLON760
2018 - 11 - 22
Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, the shape of mobile handheld 3D laser scanner technology, has been widely used...
More
α7000(top with product)
α7000(top with product)
2016 - 09 - 14
Product technology introductionHuaguang Photographic 3D Scanner has a number of patented technologies, adopting new coding calibration technology (leading technology, synchronizing advanced gom advanc...
More
HL1000
HL1000
2016 - 08 - 22
Product Features | Product features.1.Anti-collisionIn high-value equipment such as port machinery / crane / special equipment / conveyor equipment and other fields.For high-value equipment, impacts o...
More
深圳市华朗科技有限公司 Tianjin City Economic and Technological Development Zone, Fourth Street 80, Tianda Science & Technology Park South 3 layer Mailbox：co3d@co3d.com Telephone：022-5900-2803 Fax：022-5900-2805 Zip code：300457
  • Two-dimensional code name
    Two-dimensional code name
    Two-dimensional code name
Copyright ©2005 - 2013 Huaguang 3D (Tianjin) Technology Co. Ltd.
Tianjin ICP preparation of 16003447 -1
  Sitemap
犀牛云提供企业云服务
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 4006-971-972
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开
Top