Telephone: 022-5900  2803
  • Company news
    • "Artificial Sun" and 3D scanner
      "Artificial Sun" and 3D scanner
      Release Time： 2019 - 06 - 18
      Improving and improving a country's energy structure and completing a country's new energy construction more quickly and efficiently is a major event that many countries are now implementing closely. The development of solar energy, around solar energy applications, humans have thought of many ways. In China, researchers are creating an artificial sun.In the circulating 2M installation, the researcher of the “vacuum chamber” technology of the Southwest Institute of Physics of the Nuclear Group Nuclear Industry, Yu Hong is the chief designer of the most important equipment “vacuum chamber” of the circulating 2M installation. A vacuum chamber inside a car tire liner is like a space capsule. This is where the nuclear fusion reaction takes place. In the future, it will reach an ultra-h...
      More
    • Application of 3D scanner in industrial inspection
      Application of 3D scanner in industrial inspection
      Release Time： 2016 - 07 - 22
      With the development of science and technology and industrial production, more and more fields have put forward the requirement of 3D measurement of workpiece size and shape parameters. Currently on the market has successfully developed three-dimensional scanner measurement instruments, such as three-dimensional scanner in the measurement range, measurement accuracy and measurement speed and other aspects than the traditional measuring instruments. Domestic industrial products to be exported to foreign countries, the need for three-dimensional detection of comparative analysis of the report, the current industrial exports are basically the use of three-dimensional scanner to do testing.Impeller three-dimensional detection schemeThree dimensional detection schemeThe export of industrial pla...
      More
    • Three dimensional Photogrammetry System - three - dimensional measuring instrument
      Three dimensional Photogrammetry System - three - dimensional measuring instrument
      Release Time： 2016 - 09 - 03
      Huaguang 3D -3DP 3D photogrammetry system is based on the high resolution of a hand-held digital camera (4288 x 2848), the object to be measured by shooting digital photos, 2D digital photo image superposition, to obtain the 3D coordinate of the measured object, and the mobile technology to capturing 3D coordinates, quality control the analyte (Inspection) and variant analysis (Deformation) can effectively save time. Prior to the beginning of the measurement, the first object is attached to the code point, and then use the camera to shoot. During the shoot, take many different angle images, these images will be read to Huaguang 3D 3DP software, because each image of the shooting angle, each image from different angles, through triangulation, Huaguang 3D 3DP software will automatically comb...
      More
    • Three dimensional laser scanner in the diagnosis and analysis of geological disasters
      Three dimensional laser scanner in the diagnosis and analysis of geological disasters
      Release Time： 2016 - 08 - 18
      "Using the latest remote sensing technology to achieve full coverage, closely monitoring the movements of geological disasters". Recently, the international famous journals published the results of the study of the China University of Geosciences - "integrated multi remote sensing technology to monitor the overall structure of the landslide and the latest progress", has aroused widespread concern in the international.According to reports, China is a geological disaster occurred frequently and the disaster loss is very serious, landslide, collapse, debris flow disaster almost throughout the provinces in mountainous and hilly areas, the activity area of about 45% of the total land area. The key of the management and prediction of geological disaster is to carry on the lon...
      More
  • Industry news
    • 3D scan of Polish female singer
      3D scan of Polish female singer's body
      Release Time： 2021 - 09 - 25
      Human body 3D scanner, also called 3D body scanner, uses optical measurement technology, computer technology, image processing technology, digital signal processing technology, etc. to perform non-contact automatic measurement of the contour of the 3D human body surface. Use optical three-dimensional scanning to quickly scan the whole body or half of the body in multiple angles and directions, and then realize automatic splicing through computer software to obtain accurate and complete human point cloud data and achieve stronger functions.The famous Polish female singer is cooperating with Fanadise, the world's first content creator NFT platform, to launch an NFT project. The body is divided into 406 parts and auctioned out by 3D scanning, including conventional parts such as arms, leg...
      More
    • Breaking 50 years of technology monopoly in Europe and America, China successfully developed Invar
      Breaking 50 years of technology monopoly in Europe and America, China successfully developed Invar
      Release Time： 2021 - 09 - 13
      Recently, with the cooperation of Hudong Shipyard and Baosteel and other companies, China has successfully developed Invar, which is as thin as an eggshell, and successfully broke the 50-year technological monopoly of Europe and the United States. The manufacturing of this steel is even more difficult than building an aircraft carrier. What is the main purpose of this material? How to achieve localization?Invar is a metal that is widely used in the industrial field. It will not deform and has a very low expansion coefficient. It is often used in the construction of civil ships. The most common one is the LNG ship that transports liquefied natural gas, because it can maintain low temperature in the ultra-low temperature environment. It is most suitable for deforming and manufacturing equipm...
      More
    • Looking at the working principle of 3D, you will know why aero engines are so difficult to build
      Looking at the working principle of 3D, you will know why aero engines are so difficult to build
      Release Time： 2021 - 08 - 30
      The strongest in the field of aeroengines must be military aviation engines. Based on the engines of civil airliners, they pursue greater thrust and maximum thrust during overtime. Therefore, military engines can be regarded as the pinnacle of human technology.Countries that are capable of R&D, manufacturing, and production of aero-engines generally do not easily export their own technologies. They only export finished engine products, and some even need to be sent back to the country of origin for maintenance.Up to now, aero engines have to rely on manual and skilled assembly.The dense pipelines on the turbofan engine of the NK-25 engine of Figure-22M3. For a long time, this engine and the NK-32 are the most powerful aero engines in the world.The fuel injection ring of the afterburner...
      More
    • The world
      The world's first 1 million pixel SPAD image sensor
      Release Time： 2021 - 06 - 10
      Digital revolutions such as augmented reality (AR)/virtual reality (VR), autonomous driving, ultra-high frame rate shooting, and automated robots have opened up infinite possibilities for people's lives. One of the key devices that enable all of this is the 'image sensor', which is a device that converts light signals into electrical signals.The SPAD image sensor is a special image sensor. The term 'image sensor' immediately reminds people of CMOS image sensors in digital cameras, but SPAD sensors work differently.Both SPAD and CMOS image sensors take advantage of the fact that light is composed of light particles. However, each pixel of the CMOS image sensor measures the amount of light that reaches the pixel within a given time, while the SPAD image sensor measures ea...
      More
    • Real-time 3D motion tracking system, which can replace lidar and autopilot cameras
      Real-time 3D motion tracking system, which can replace lidar and autopilot cameras
      Release Time： 2021 - 05 - 21
      According to media reports, the University of Michigan has developed a new real-time 3D motion tracking system that can replace imaging system technologies such as lidar and cameras in autonomous driving applications.This technology combines transparent light detectors with advanced neural networks and is expected to be used in the fields of automated manufacturing, biomedical imaging and autonomous driving. Zhaohui Zhong, an associate professor of electronic and computer engineering at the University of Michigan, and his team have developed a transparent, nanoscale, and highly sensitive graphene photodetector. The imaging system takes advantage of this detector. Since graphene is very sensitive to light, it is enough to produce images that can be reconstructed by computational imaging. Th...
      More
  • Exhibition
    • 2023 Shanghai International Casting Exhibition
      2023 Shanghai International Casting Exhibition
      Release Time： 2023 - 12 - 04
      The 19th Shanghai International Casting Exhibition, which lasted for 3 days, was successfully held at the Shanghai New International Expo Center from November 29 to December 1, 2023. Hualang 3D showcases advanced handheld 3D scanners, automated 3D detection systems, and professional 3D measurement solutions.The Hualang 3D team conducted on-site demonstrations for clients and exchanged ideas on the application and development of 3D digital technology in the field of quality manufacturing. The exhibition site was exciting and full of highlights!The Shanghai International Casting Exhibition was founded in 2005 and has been successfully held for 18 sessions. The exhibition covers the fields of castings, casting molds, casting materials, casting equipment, and casting accessories. At that time,...
      More
    • 2019 The 9th China Shanghai International Automotive Interior and Exterior Exhibition
      2019 The 9th China Shanghai International Automotive Interior and Exterior Exhibition
      Release Time： 2019 - 08 - 24
      2019 The 9th China Shanghai International Automotive Interior and Exterior Exhibition was grandly opened at the Shanghai New International Expo Center. The exhibition was held for three days on August 15-17, 2019. It covers an area of more than 40,000+ square meters and more than 35,000+ industry visitors, automotive engineers and professional related procurement personnel.Our booth mapThis exhibition is based on the theme of “car interior and exterior decoration”. Automotive industry robots and automation equipment, interior soft material cutting and cutting equipment, sewing equipment, interior parts molds and manufacturing technology, polyurethane equipment, door panel welding equipment, automotive plastics new technology and technology, ultrasonic equipment, assembly tools including an...
      More
    • 22nd North China International Intelligent Manufacturing Exhibition
      22nd North China International Intelligent Manufacturing Exhibition
      Release Time： 2019 - 05 - 07
      The 22nd North China International Intelligent Manufacturing Exhibition was grandly opened in Shenyang International Exhibition Center. The exhibition lasted for three days and was of great scale. Shenyang, the host city, is the central city of Northeast China, the transportation hub of Northeast China, and the material distribution center of China's important industrial base.On-site photographs of the exhibitionThe theme of this exhibition is a complete set of solutions for robotic application products and intelligent factories. For Hualang engineers and exhibitors (automotive assembly, automotive parts production, welding, 3C, integrated solutions for machine tool application industry, robotic workstation, robotic intelligent production line, etc.), the new three-dimensional scanner ...
      More
    • 2019 17th China (Guangzhou) International Automotive Parts Exhibition
      2019 17th China (Guangzhou) International Automotive Parts Exhibition
      Release Time： 2019 - 05 - 05
      Recently, the 17th China (Guangzhou) International Auto Parts Exhibition/International Die Casting and Casting Exhibition was held in Pazhou International Purchasing Center of Guangzhou for three days. More than 500 exhibitors (from 20 countries and regions) are expected, and the number of exhibitors is estimated to be around 40,000 (from 31 countries and regions).On-site photography of the exhibitionThe theme of this exhibition is industrial design, aviation, navigation, new energy and other industries. Hualang three-dimensional engineer communicates face-to-face with each domestic and foreign purchasing decision-maker, introduces in detail the use of three-dimensional scanner and its application industry, and concludes transactions with intended customers to expand brand influence among ...
      More
    • Ninth China Automobile Technology Exhibition & Automobile Testing and Technology Exhibition
      Ninth China Automobile Technology Exhibition & Automobile Testing and Technology Exhibition
      Release Time： 2019 - 04 - 29
      The 9th China Automobile Technology Exhibition and Automobile Inspection and Technology Exhibition opened in Chongqing International Exhibition Center. The exhibition lasts for three days, covering an area of 46,000_, with more than 700 exhibitors and a total of 35,000 participants.The theme of this exhibition is automotive front-loading industry technology. Special theme area of automobile testing and testing technology is designed to systematically display the latest testing, testing, development and validation technologies for the whole vehicle and parts, providing innovative solutions for the continuous improvement of safety, reliability, durability and high quality in automobile manufacturing industry.On-site photographs of the exhibitionHualang three-dimensional technicians displayed...
      More
  • Handheld 3D scanner
    • HOLON A22
      HOLON A22
      Release Time： 2019 - 11 - 02
      Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, Huaguang handheld 3D laser scanner technology leading, this product has been widely used in reverse engineering and 3D inspection. The product adopts new hand-held design, light weight (0.83kg), easy to carry; ready to use; high work efficiency, flexible scanning scheme can be customized according to user needs, can cooperate with our 3D photogrammetry system when scanning large workpieces ( HL-3DP) eliminates accumulated errors and improves the global scanning accuracy of large workpieces. With 14 laser lines + extra 1 scan deep hole+ 7 additional scan details, dual industrial camera, automatic dot stitching technology combined with scanning software, support photogrammetry and self-calibration technology. It is suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. The operation process is flexible and convenient, and it is suitable...
      More
    • HOLON B71
      HOLON B71
      Release Time： 2021 - 09 - 29
      Product technology introductionThe domestic manufacturer of handheld laser scanner independently developed by Huaguang is specialized in handheld 3D laser scanner technology. This product has been widely used in the field of reverse engineering and 3D detection. The product adopts new handheld design, light weight and easy to carry; Ready to use; With high work efficiency, the scanning scheme can be flexibly formulated according to user requirements. When scanning large workpieces, it can cooperate with our three-dimensional Photogrammetry System (hl-3dp) to eliminate accumulated errors and improve the global scanning accuracy of large workpieces. It adopts 22 laser lines + 1 scanning deep hole + 7 scanning details, dual industrial cameras, automatic splicing technology of marker points and scanning software to support photogrammetry and self calibration technology. It is suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. the operation process is fle...
      More
    • HOLON D71
      HOLON D71
      Release Time： 2018 - 11 - 23
      Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, the shape of mobile handheld 3D laser scanner technology, has been widely used in reverse engineering and 3D inspection. The product uses a new hand-held design, light weight , easy to carry; ready to use; high work efficiency, flexible scanning solution according to user needs, can cooperate with our 3D photogrammetry system when scanning large workpieces (HL -3DP) Eliminates accumulated errors and improves global scanning accuracy of large workpieces. Using 26+14+1laser lines, dual industrial cameras, automatic point stitching technology and scanning software, support photogrammetry and self-calibration technology. It is especially suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. The operation process is flexible and convenient, and it is suitable for various complicated application scenarios.HOLON D71 Technical Features1. Lig...
      More
    • HOLON DB1
      HOLON DB1
      Release Time： 2021 - 12 - 28
      Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, the shape of mobile handheld 3D laser scanner technology, has been widely used in reverse engineering and 3D inspection. The product uses a new hand-held design, light weight , easy to carry; ready to use; high work efficiency, flexible scanning solution according to user needs, can cooperate with our 3D photogrammetry system when scanning large workpieces (HL -3DP) Eliminates accumulated errors and improves global scanning accuracy of large workpieces. Using 26+22+1laser lines, dual industrial cameras, automatic point stitching technology and scanning software, support photogrammetry and self-calibration technology. It is especially suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. The operation process is flexible and convenient, and it is suitable for various complicated application scenarios.HOLON DB1 Technical Features1. Lig...
      More
    • Galaxy 57
      Galaxy 57
      Release Time： 2023 - 08 - 26
      Product technology introductionHandheld design, easy to carry, and ready to use; Industrial grade large-scale 3D scanning system with high work efficiency. Blue laser light source, 34 crossed blue laser lines+22 parallel blue laser lines+1 deep hole scanning laser line, dual industrial cameras, automatic marking point splicing technology combined with scanning software, supporting photogrammetry and self calibration technology. Flexible scanning plans can be developed according to user needs.Product modelGalaxy 57Light source57 blue laser lines (wavelength: 450nm)Measuring speed3,350,000points/sScan modeStandard modeDeep hole modePrecision mode34 crossed blue laser lines1 blue laser line22 crossed blue laser linesData accuracy0.02mm0.02mm0.01mmScanning distance450mm450mm450mmScan depth of field550mm550mm200mmResolving power0.01mm(max)Scanning area800×600mmScanning range0.1-10M（expandable）Volumetric accuracy0.02+0.03mm/m0.02+0.015mm/m  combined with hl-3dp 3D global Photogramm...
      More
  • Camera 3D scanner
    • α7000
      α7000
      Release Time： 2016 - 09 - 14
      Product technology introductionHuaguang Photographic 3D Scanner has a number of patented technologies, adopting new coding calibration technology (leading technology, synchronizing advanced gom advanced technology), which is the core of 3D photogrammetry technology and application, reducing physical distortion and improving the original 3D data scanning accuracy. The heterodyne multi-frequency phase shift grating technique is used to improve the quality of the scanning point cloud. Synchronized with the German gom company, it has a Blu-ray device scanning system, and the camera-type 3D scanner scans data points up to 0.01mm, which is suitable for fine workpiece scanning. The new core design concept uses carbon fiber materials to improve the stability of the product during operation. Α7000 technical features1, super high efficiency: a car scan ≤ 2 hours2, cost-effective: no photogrammetry cooperation, can complete large-scale measurement3, high stability: the use of carbon fiber pa...
      More
    • HL-3DS(Multi-function）
      HL-3DS(Multi-function）
      Release Time： 2016 - 07 - 27
      Product technology introductionCO3D camera-type 3D scanner has a number of patented technologies, using a new code calibration technology, which is the core of 3D photogrammetry technology, and reduces the physical distortion to improve the original 3D data scanning accuracy. The heterodyne multi-frequency phase shift grating technique is used to improve the quality of the scanning point cloud. Synchronized with German gom company, it has a Blu-ray device scanning system, and the camera-type 3D scanner scans data points up to 0.01mm, which is suitable for fine workpiece scanning. It adopts international new core design concept and applies carbon fiber materials to improve product stability. Sex. 3D scanner HL-3DS technical features:1.13 step code calibration technology: eliminate lens distortion error and improve scanning accuracy2. Heterodyne multi-frequency phase shift grating: uniform fringe projection, point cloud data accuracy, no noise data3. Portable design: the hardware sy...
      More
    • HL-3DM（Precision type）
      HL-3DM（Precision type）
      Release Time： 2016 - 07 - 25
      Introduction to product technologyShape moving picture type 3 d scanner has a number of patented technology, using the latest international code calibration technology (leading domestic, the synchronization of the international advanced technology, the technology is the core of the technology of three-dimensional photogrammetry mastery and application of reducing physical distortion the original 3 d scanning data precision is improved. In this paper, the technology of multi-frequency phase shift with heterodyne method is used to improve the quality of scanning point cloud. In sync with gom in Germany, the scanning system of blue light device is true, and the scanning data point of 3d scanner can reach 0.01 mm, which is suitable for fine workpiece scanning. Adopt the new international core design concept, apply carbon fiber material, improve the stability of the product work.  Features of 3d scanner hl-3dm technology: 1. High-precision motherboard data: using German ...
      More
    • HL-3DX（top sellers）
      HL-3DX（top sellers）
      Release Time： 2016 - 07 - 27
      Product technology introduction:The shape-moving photo-type 3D scanner has a number of patented technologies and adopts a new code calibration technology. This technology is the core of the 3D photogrammetry technology and its application. The reduction of physical distortion improves the accuracy of the original 3D data scanning. The heterodyne multi-frequency phase shift grating technique is used to improve the quality of the scanning point cloud. Synchronized with the German gom company, it has a Blu-ray device scanning system, and the camera-type 3D scanner scans data points up to 0.01mm, which is suitable for fine workpiece scanning. The new core design concept uses carbon fiber materials to improve the stability of the product during operation. Industrial grade 3D scanner HL-3DX technical features:1, the product has a long service life, up to 35,000 hours2, hardware stability, system size is small (360 × 120 × 120mm), easy to disassemble, easy to bring to the measu...
      More
    • HL-3DX+
      HL-3DX+
      Release Time： 2016 - 09 - 14
      Product technology introduction: Shape moving picture type 3 d scanner has a number of patented technology, using the latest international code calibration technology (technique of synchronous leading domestic, international advanced), the technology is the core of the technology of three-dimensional photogrammetry mastery and application of reducing physical distortion the original 3 d scanning data precision is improved. In this paper, the technology of multi-frequency phase shift with heterodyne method is used to improve the quality of scanning point cloud. In sync with gom in Germany, the scanning system of blue light device is true, and the scanning data point of 3d scanner can reach 0.01 mm, which is suitable for fine workpiece scanning. Adopt the new international core design concept, apply carbon fiber material, improve the stability of the product work. Industrial grade 3d scanner hl-3dx + technical features: 1. Long service life, up to 35,000 hours 2. Hard...
      More
  • Three dimensional Photogrammetry System
    • HL-3DP
      HL-3DP
      Release Time： 2016 - 07 - 27
      Introduction to product technology  Shape moving picture type 3 d scanner has a number of patented technology, using the latest international code calibration technology (technique of synchronous leading domestic, international advanced), the technology is the core of the technology of three-dimensional photogrammetry mastery and application of reducing physical distortion the original 3 d scanning data precision is improved. In this paper, the technology of multi-frequency phase shift with heterodyne method is used to improve the quality of scanning point cloud. In sync with gom in Germany, the scanning system of blue light device is true, and the scanning data point of 3d scanner can reach 0.01 mm, which is suitable for fine workpiece scanning. Adopt the new international core design concept, apply carbon fiber material, improve the stability of the product work. Product features 1. Aviation special anti-pressure instrument box, anti-collision design protection. &...
      More
  • 3D online inspection system
    • HL-Scan 3D Scanning System
      HL-Scan 3D Scanning System
      Release Time： 2018 - 12 - 10
      Huaguang HL-Scan three-dimensional scanning system can quickly complete three-dimensional detection and reverse engineering application of various size workpieces. It can automatically locate target points without arm or other tracking equipment. It can scan a cross laser beam plus an additional laser beam with a scanning speed of 1340,000 measurements/seconds. It is a plug-and-play system, which can be installed and used quickly without layering point clouds. Automatically generate three-dimensional solid graphics (triangular mesh surface); hand-held arbitrary scanning, portable operation, wide scope of application, scanning in narrow space, no requirements for the working environment.Real-time interaction between multi-function keys and software17.6m³ super large workspace, expandable (dynamic coordinate system can be established)Ignore complex factors such as workshop vibrationNo fixed installation, easy operationIf you don't stick to the point, you can take it and sweep it...
      More
    • Robot automatic three-dimensional online detection
      Robot automatic three-dimensional online detection
      Release Time： 2018 - 11 - 24
      Product technology introductionWith the rapid development of the field of 3D scanning, our company has accumulated nearly 20 years of technology to launch an automated 3D online inspection system. Through the installation of equipment directly on the production line, 3D software measurement technology is used for real-time detection and data feedback, so that the product can better produce guidance. Work, reduce unnecessary losses, save time and production costs, greatly improve production efficiency.HOLON760 Technical Features1. Operational performance safety: man-machine cooperation robot, no need for guardrail, easy to operate.     2. Fully automatic scanning: The whole process from 3D scanning to generating test report can be completed with one click.     3. High data accuracy: accuracy up to 0.015mm, strong resistance to environmental interference.     4. Blu-ray scanning technology: The three-dimensional online detection system adopts ...
      More
  • Big scene 3D scanner
    • HL1000
      HL1000
      Release Time： 2016 - 08 - 22
      Product Features | Product features.1.Anti-collisionIn high-value equipment such as port machinery / crane / special equipment / conveyor equipment and other fields.For high-value equipment, impacts often result in huge economic and personnel losses.Conventional single-point detection equipment such as photoelectric (including single-point laser), ultrasonic and other anti-collision schemes can only detect in the linear direction, and there are detection blind spots for irregular obstacles and corners.Laser scanning products enable surface inspection and scan areas in the direction of travel of the device for more reliable protection.2. DetectionIn the scanning range, different shapes of detection areas can be set, and when an object enters the area, a signal can be output through the I/O port.3. SecurityThe area can be protected by scanning the area. Laser scanning eliminates the need for additional light sources, is unaffected by ambient light, and is highly reliable.It can accuratel...
      More
  • Color 3D scanner
    • HL-3DC
      HL-3DC
      Release Time： 2016 - 07 - 27
      Product technology introductionThe HL-3DC color 3D scanner uses advanced image texture analysis and acquisition technology to maintain true color display of the surface of the object while performing 3D data reconstruction. This technology completely preserves the true color of the measured object, and is very suitable for digital cultural relics, ancient building surveys, computer synthesis, games, virtual three-dimensional environment, three-dimensional digital product demonstration, archaeological and other occasions with high texture and color requirements. The 24-bit color point cloud data closely combines the object's three-dimensional data information with the surface texture information to maximize the true physical characteristics of the object.  Product numberHL-3DCSensor: resolution (pixels)1,300,000x3 (optional 2 million, 3 million, 5 million pixels)Single measurement accuracy (mm)≤±0.01mmSingle measurement time (S)≤3SMeasuring point distance (mm)0.07~0.4...
      More
  • Anthropometer
  • Desktop level 3D scanner
  • Video Center
  • Marker point, marker ball, coding point
    • Fluorescent marker
      Fluorescent marker
      Release Time： 2021 - 11 - 29
      Features of fluorescent marker products1. Improve the accuracy of 3D scanner: the boundary of mark points shall be printed clearly without defects and toothed defects. It reduces scanning misjudgment and improves the splicing accuracy of 3D scanning data.2. Improve the recognition rate of sign points: high grade materials are adopted to make the black-and-white information of the pattern clear, and there is no reflection and misjudgment in multi angle three-dimensional scanning.3. Tear proof: high grade PET, PVC and other materials are used to avoid the shortcomings of easy fragmentation and poor viscosity of ordinary paper.                                                                                              Actual picture of product    ...
      More
    • Mark point
      Mark point
      Release Time： 2016 - 07 - 27
      3D scanner supplies marking point:1 improve the accuracy of 3D scannerMark point boundary printing is clear, no defect, no tooth defect phenomenon, reduce the scan error, improve the accuracy of 3D scanning data splicing.2 improve the recognition rate of mark pointsThe use of high-grade matte material, the pattern of black and white color information clear, multi angle three-dimensional scanning without reflection phenomenon, no error.3 anti tear, repeated useThe use of high-grade PET, PVC and other materials, to avoid the common paper easy fragmentation, the shortcomings of poor viscosity, can be repeated use.                                                                                                 Actual picture of product    &...
      More
    • Corner
      Corner
      Release Time： 2016 - 07 - 27
      Because of the high recognition accuracy of the corner marks, the recognition accuracy of the image is widely used in the field of image intelligent recognition.This advanced technology: compared with ordinary circular markers, angular landmark image algorithm is more advanced, can get the accurate mark point center coordinatesBy reducing the errors, reduce misjudgment, greatly improve the precision of data registrationThis corner is a special symbol of fluorescent vlong 3D independent R & D and production of portable 3D laser scanner, there are two different models to meet the different needs of scanning.                                                                                            Actual picture of productDemand feedbackCustomers can make se...
      More
    • Magnetic coding point
      Magnetic coding point
      Release Time： 2016 - 08 - 12
      Special magnetic coding points for HL-3DP 3D photogrammetry:1, with a clear pattern, the boundaries of non aliasing, uniform color and other features, easy to image recognition;2, with the magnetic adsorption function, especially suitable for the three-dimensional measurement of metal parts;3, standard 10 bit 0-99 coding (suitable for small and medium workpiece precision measurement), 12 bit 0-299 coding (larger workpiece three-dimensional measurement, such as: automobile, etc.), 14 bit 0-420 coding (large workpiece, three-dimensional measurement of complex workpiece)Demand feedbackCustomers can make service requests to the company through effective communication methods such as telephone and mail. We will respond within 2 hours and propose solutions within 24 hours.Equipment RepairOur company responded to customer questions in the first time after receiving the product failure notice. After the effective communication methods such as telephone and mail can not rule out the equipment f...
      More
  • Automobile traffic
    • Three dimensional scanning of tricycle base
      Three dimensional scanning of tricycle base
      Release Time： 2024 - 01 - 11
      Tricycles are commonly used lightweight transportation tools in today's society, which can play a significant role in carrying people and transporting goods. The safety of a tricycle relies entirely on its frame, and as an important component of an electric tricycle, quality control becomes of utmost importance.Practical problemsThe customer requires a 3D scanner to scan high-precision complete data with high efficiency, detect actual machining errors, and ensure safe driving in the later stage. The three wheeled frame is an alloy tube frame structure with a large curvature, making it difficult to use traditional measurement methods and unable to quickly and accurately obtain the three-dimensional model data of the electric vehicle frame.Co3d solutionUsing 14 laser lines+7 fine modes+1...
      More
    • 3D inspection of automotive battery packs
      3D inspection of automotive battery packs
      Release Time： 2023 - 11 - 27
      As the 'heart' of new energy vehicles, battery technology plays a crucial role in their normal operation and is also a key link in the upgrading and breakthrough of the new energy industry chain. The customer needs to check if the battery installation is in place.Physical picture of car battery packPractical problems  The battery pack is a precision workpiece with a complex and uneven surface, a complex structure, and wire connections on the side. Customers have high requirements for data accuracy, and traditional measurement techniques are difficult to obtain high-precision data, which cannot meet the measurement results that customers need.Scanning image of battery pack on siteCo3d solution  For complex surface features, Hualang engineers use a handheld 3D scanner HOLON...
      More
    • 3D scanning of automobiles
      3D scanning of automobiles
      Release Time： 2023 - 11 - 21
      Cars are one of the important products of modern society. With the popularization of automobiles, their utility has become increasingly prominent. With the increase in demand and the increasing development space, a certain car manufacturer needs to conduct a three-dimensional scan of the overall appearance of the car.Car scanning scene mapPractical problems  The car has a large volume, irregular surface, and many curves. Customers have requirements for scanning speed. Traditional detection methods are slow to manually measure, and the data is not accurate. Many parts cannot be effectively measured, leading to secondary errors.Car scanning scene mapCo3d solution  In response to the problems faced, Hualang engineers use a handheld 3D scanner 'HOLON B71' to comprehensively s...
      More
    • 3D inspection of car seats
      3D inspection of car seats
      Release Time： 2023 - 10 - 18
      The automotive industry in China has developed rapidly in recent years and will continue to steadily develop in the future. As an important component of automobiles, car seats have a large demand for seats, so there is still huge development space for the passenger car seat industry in the future. A well-known manufacturer needs to perform a 3D scan of the seats.Product physical imagePractical problems    Product quality inspection requires high measurement accuracy. The workpiece has a black and dark surface, and the overall contour is complex, with many curved surfaces and included angles. Traditional measurement methods cannot accurately and comprehensively measure surface 3D data, and there is a lack of effective measurement solutions for complex contours and narrow dead corn...
      More
    • 3D inspection of forklifts
      3D inspection of forklifts
      Release Time： 2023 - 09 - 05
      Forklifts play a very important role in the logistics system of enterprises and are the main force in material handling equipment. Widely used in various departments of the national economy such as stations, ports, airports, factories, warehouses, etc. Therefore, in the past few years, the demand for forklifts in China has been growing at a double-digit rate every year.Practical problems1. The customer needs to conduct a three-dimensional inspection of the rear hood of the forklift and measure the dimensions of the installation holes. High data accuracy2. The workpiece is 2.5 meters wide, weighs 15 tons, has a large volume, and has an irregular surface with many curved surfaces and hole positions3. Traditional detection methods are slow to manually measure, with inaccurate data, and many p...
      More
  • Aerospace
    • Aircraft shell defect detection
      Aircraft shell defect detection
      Release Time： 2023 - 02 - 22
      During the long-term high altitude flight of the aircraft, the high intensity air pressure on the shell surface and the objects in the air are prone to produce large range of depressions due to friction and collision. In order to ensure the stability of the cabin air pressure, it is necessary to repair the depressions of the aircraft shell, so as to ensure the safety of the aircraft during flight and achieve the purpose of extending the working time cycle of the aircraft.Physical drawing of aircraft sitePractical problemsAfter the aircraft was split, in order to quickly achieve the purpose of surface detection, the manufacturer decided to use the Hualang 3D handheld 3D laser scanner HOLON B71 to detect the shell depressionHigh-precision 3D detection process:       ·...
      More
    • Three dimensional scanning of aircraft impeller
      Three dimensional scanning of aircraft impeller
      Release Time： 2022 - 11 - 22
      Three dimensional scanning of aircraft impeller        Impeller is the core part of aeroengine, and its overall contour is three-dimensional free surface. In the detection of similar parts of impeller, high-precision detection is the first problem in the whole detection link. In the process of repeated detection and practice, a mature and perfect detection scheme has gradually formed.飞机引擎叶轮实物图面临的问题| Practical problems      The inspection of aircraft impeller usually requires full size inspection. There are many items to be inspected. The efficiency of traditional single point inspection is too slow to be applied to the heavy work of multi part inspection. The free surface distortion is serious, and the 3D data of the equipment cannot be stable during meas...
      More
    • Three dimensional inspection of aircraft inner panel
      Three dimensional inspection of aircraft inner panel
      Release Time： 2022 - 05 - 20
      Three dimensional inspection of aircraft inner panelAir travel has increasingly become one of the important means of transportation, and passengers' riding experience has been paid more and more attention. The sound insulation inside the cabin has become one of the main problems, and the air tightness of the covering parts in the aircraft is a direct factor.Pracical problems1. In order to improve the coincidence degree of aircraft panel assembly, obtain the three-dimensional data of the processed inner panel.2. Using traditional measuring tools to obtain the special surface data of aircraft inner panel is incomplete, which can not meet the needs of customers.飞机内覆盖件对现场扫描图SolutionsUse the CO3D  handheld 3D scanner Holon B71 and 30 crossed blue laser lines to obtain 3D data quickly a...
      More
    • Three dimensional inspection of engine blades
      Three dimensional inspection of engine blades
      Release Time： 2022 - 04 - 22
      Three dimensional inspection of engine bladesThe blade is a key part of aero-engine, and its manufacturing volume accounts for about one-third of the total machine manufacturing volume. Aero-engine blades are thin-walled and easily deformed parts. How to control its deformation and process it efficiently and with high quality is one of the important research topics in the blade manufacturing industry.Practical problems1. Use a hand-held 3D scanner to inspect the engine blades, compare the acquired 3D data with the standard parts, the accuracy is 0.02mm, and process the unqualified parts.2. Using traditional measurement methods (checking jig, jig, three-coordinate, etc.), the acquired data is incomplete, and the curved surface cannot be measured, resulting in an incomplete amount of acquire...
      More
    • Three dimensional inspection of aircraft exhaust hood
      Three dimensional inspection of aircraft exhaust hood
      Release Time： 2022 - 03 - 12
      Three dimensional inspection of aircraft exhaust hoodAs the core power component of aircraft, the exhaust hood of aircraft engine plays an important role. At the same time, it can protect the engine and surrounding pipeline accessories, including engine, circuit, oil circuit, braking system and transmission system, so as to fully protect the normal operation of the aircraft.Practical problems1. The aircraft exhaust hood is made of titanium alloy. Several typical failure forms of titanium alloy may occur in aviation engineering applications, including fretting wear, fretting fatigue, hot salt stress corrosion, hydrogen embrittlement, embrittlement of low melting point metal and contact corrosion.2. The air intake hood of aircraft engine has the characteristics of different groove shapes and...
      More
  • Heavy equipment manufacturing
    • 3D scanning of compressor components
      3D scanning of compressor components
      Release Time： 2023 - 11 - 25
      A compressor is a driven fluid machinery that elevates low-pressure gas to high-pressure gas and is the heart of a refrigeration system. It sucks in low-temperature and low-pressure refrigerant gas from the suction pipe, drives the piston to compress it through the operation of the motor, and then discharges high-temperature and high-pressure refrigerant gas to the exhaust pipe, providing power for the refrigeration cycle. A certain compressor manufacturer needs to perform 3D scanning of compressor components.Physical image of compressorPhysical drawing of compressor componentsPractical problems  The workpiece has a large volume and weight, and there are many uneven details on the surface. The difficulty of collecting part detail data greatly increases, and customers have high require...
      More
    • 3D inspection of the inner wall of a large furnace hearth
      3D inspection of the inner wall of a large furnace hearth
      Release Time： 2023 - 10 - 24
      The hearth is a structural area of a blast furnace, generally referring to the furnace body between the centerline of the first row of tuyeres and the furnace bottom. During the smelting process of the blast furnace, molten iron flows into the front furnace through the hearth and bridge.On site drawing of the inner wall of a large furnace hearthPractical problems      The inner wall of the furnace hearth is arc-shaped and has a large area. The on-site environment is relatively complex, and traditional measurement methods cannot perform complete scanning and splicing. The customer requires high precision in size detection of key parts in order to obtain accurate error values for key parts.On site scanning image of the inner wall of a large furnace hearthCo3d solution...
      More
    • 3D scanning of diesel engine
      3D scanning of diesel engine
      Release Time： 2023 - 10 - 14
      A diesel engine is a type of internal combustion engine that primarily utilizes the combustion of diesel fuel to generate energy. It has the characteristics of high efficiency, high power, and durability, and plays an important role in industries, transportation, and agriculture. With the advancement of technology, the performance of diesel engines will further improve. A well-known manufacturer uses a 3D scanner to perform 3D scanning and reverse modeling.Practical problems    The internal structure of the workpiece is complex and variable, with a large volume and a large measurement workload. The measurement speed needs to meet customer requirements, and there are many surface holes, which greatly increases the difficulty of collecting detailed data of the partsCo3d solution...
      More
    • 3D inspection of coal mining machine components
      3D inspection of coal mining machine components
      Release Time： 2023 - 09 - 11
      The coal mining machine is a large and complex system that integrates mechanical, electrical, and hydraulic systems. The working environment is harsh, and if there is a malfunction, it will cause the entire coal mining work to be interrupted, causing huge economic losses. In order to ensure the later usage cycle, customers need to scan the coal mining machine components, and the scanned data is subjected to three-dimensional testing. Practical problemsThe structure of the workpiece is complex, the direction of the surface is variable, and the difficulty of collecting detailed data of the parts greatly increases. Customers demand high scanning accuracy and complete data.     Traditional measurement methods are time-consuming and labor-intensive, and the collected data is...
      More
    • Failure analysis of oil pipes
      Failure analysis of oil pipes
      Release Time： 2023 - 08 - 29
      Petroleum pipes are seamless steel pipes suitable for furnace pipes, heat exchangers, and pipelines in petroleum refineries. The customer needs to conduct failure analysis on the ruptured oil pipe, simulate and reproduce the failure phenomenon through analysis and verification based on the failure mode and phenomenon, identify the cause of the failure, and explore the process of failure mechanism.Practical problemsThe oil pipe has a large volume and a curved surface. The customer needs to measure the thickness of the ruptured part of the oil pipe and the thickness related to itself, and the accuracy of data collection needs to be high. And the scanning time is required to be short, and the obtained data can be accurately detected and analyzed. The current detection methods are time-consumi...
      More
  • New energy
    • Impeller reverse design
      Impeller reverse design
      Release Time： 2023 - 07 - 14
      A centrifugal fan relies on input mechanical energy to accelerate gas through a high-speed rotating impeller. A centrifugal fan is composed of a casing, main shaft, impeller, bearing transmission mechanism, and motor. The speed of the fan can not only cancel throttling losses, but also ensure that the fan always operates in an efficient area, thus greatly saving electricity. This reflects the new trend of current industrial production.Product physical imagePractical problems    The customer hopes to obtain 3D data of the casing and impeller, establish a comprehensive 3D mathematical model, and use it for product construction design, modification design, and subsequent quality inspection.    1. The surface of the casing appears dark black and uneven, with many curved sur...
      More
    • Water turbine bucket defect detection
      Water turbine bucket defect detection
      Release Time： 2023 - 03 - 11
      Water turbine bucket defect detection     Most of the impulse turbines that have been operated for many years have cracks in their buckets, and some will also have bucket dropping, which has seriously affected the safety and economic operation of the hydropower station. However, most of the bucket repairs are conducted on site, the treatment process is rough, and the quality is not guaranteed, which brings hidden dangers to the operation of the unit after maintenance.     The personnel of the project team decided to use the hand-held 3D scanner to carry out all-round defect detection on the hydraulic turbine bucket Physical drawing of water turbine bucket Physical drawing of water turbine bucketPractical problem     Fine cracks on the ...
      More
    • Three-dimensional inspection of turbine volute
      Three-dimensional inspection of turbine volute
      Release Time： 2023 - 03 - 10
      The turbine volute is one of the commonly used equipment in hydropower plants at present. The huge energy generated by the drop of high water level makes the volute undergo regular maintenance. There are many disadvantages in the previous maintenance. In order to further save the maintenance time and cost, the manufacturer decided to use the Hualang handheld 3D scanner for inspection:Physical drawing of turbine volute Structural drawing of turbine volutePractical problems       The internal space of the volute is narrow, which has a great limit on the detection space       The overhaul area is large, and all scanning work needs to be completed within the time limit of the manufacturer       The surface of spiral case is rusty...
      More
    • 3D Scanning of Leaf
      3D Scanning of Leaf
      Release Time： 2021 - 12 - 10
      3D Scanning of LeafThe surface of the blade workpiece is a complex curved surface. In the quality inspection, due to the influence of the shape and structure of the workpiece, the traditional industrial inspection method is used to directly detect the workpiece, which can no longer meet the increasing demand of industrial inspection. The types of data that can be inspected are limited, and it is impossible to accurately and quickly determine whether the data is It meets the design requirements, and the detection process takes a long time.Practical problemObtain the point cloud data of the workpiece through three-dimensional scanning, establish a high-precision three-dimensional model, and directly compare the three-dimensional model with the original design model, which can quickly and acc...
      More
    • Wind blade 3D inspection
      Wind blade 3D inspection
      Release Time： 2020 - 09 - 09
      Three-dimensional inspection of wind bladesThe design of the blades in a wind turbine can directly affect the efficiency of wind energy conversion. Good design, reliable quality and superior performance are the decisive factors to ensure the normal and stable operation of the unit. It directly affects its annual power generation and is an important part of wind energy utilization. 3D scanning technology is used to quickly obtain 3D data of the inspection position of the blade, and through data analysis and comparison, we can understand the existence of the problem and make timely maintenance to ensure the operation of the work.Site scanPractical problemsThe customer needs to check the size of the outer ring of the blade root to check the amount of deformation. And it requires high precisio...
      More
  • Ship engineering
    • Ship engine detection
      Ship engine detection
      Release Time： 2016 - 07 - 22
      Ship engine detectionAnalysis of full size surface 3D engineers use 3D scanner Huaguang HL-3DW can be generated on a ship engine, a detailed test report, any position deviation can also display the numerical value of.Practical problems1, the ship engine shell size 2m*0.8m*1m, curved surface, assembly position very much, in addition to improve the measurement efficiency, and shorten the measurement time, the measurement accuracy will be well controlled, global measurement accuracy within 0.1mm2, with the traditional measurement method to obtain the ship engine housing data is insufficient, can not be carried out two times the design and product quality inspection.CO3D solutionsIs a leading Foundry Company in large castings industry veteran of the company, the traditional engine measurement ...
      More
    • 3D reverse scanning of bathtub
      3D reverse scanning of bathtub
      Release Time： 2020 - 11 - 27
      3D reverse scanning of bathtubWith the vigorous development of the real estate industry, China's sanitary ceramics industry has also achieved rapid development, the original ceramic enterprises continue to integrate, new ceramic enterprises are also emerging. Customers want to obtain the data of bathtub without drawings by 3D scanning, so as to improve the shape and function of bathtub.Field scanPractical problemBathtub overall area is big, concave surface is wide and deep, scanning is easy to consume time. Customers require high precision, data can be used in the later work, improve the quality of products. Because the bathtub needs to be installed and connected with parts, it is necessary to avoid errors in assembly. High precision and high efficiency 3D scanner is needed for scannin...
      More
    • Kayak model reverse detection
      Kayak model reverse detection
      Release Time： 2016 - 09 - 10
      Large canoe reverse scan modelKayak models up to four meters, scanning the difficulty coefficient is big. Through the analysis of 3D Technology Engineer Huaguang scanning, 3D scanner using HL-3DW technology, 3D data can only get forty minutes time kayaking model, the accuracy of the 0.1mm.Practical problems1, the traditional method of measuring data acquisition density is not enough (data deficient) and the surface model and the radian of canoeing can not be measured, unable to detect late nor reverse mapping.2, kayak model 4.0m long, general 3D scanner scanning format is small, large objects when the cumulative scanning area too much, can not find and so on logo stitching. Generate a large amount of work, low efficiency, and the accuracy of the data can not reach the customer demand.CO3DS...
      More
  • Electronic appliance
    • 3D detection of washing machine control panel
      3D detection of washing machine control panel
      Release Time： 2023 - 10 - 11
      A well-known washing machine manufacturer needs to conduct a three-dimensional inspection of the washing machine control panel.Practical problemsThe control panel of the washing machine has multiple operation buttons, and there are many hole positions on the surface of the buttons. Customers need to detect the hole size of the workpiece. Traditional measurement methods cannot fully obtain surface data, and the control panel needs to be matched with internal parts, requiring high accuracy in obtaining three-dimensional data.Co3d solutionAccording to customer requirements, Hualang 3D technical engineers use a handheld scanner HOLON B71 to perform 3D data scanning on the control panel, real-time visualization scanning, synchronous data generation, multi line laser data acquisition, with a spe...
      More
    • VR glasses reverse modeling
      VR glasses reverse modeling
      Release Time： 2023 - 09 - 28
      VR glasses are a product that combines simulation technology, computer graphics, human-machine interface technology, multimedia technology, sensing technology, network technology, and other technologies. They are a brand new human-machine interaction method created with the help of computers and the latest sensor technology. Practical problems    Customers need to scan and reverse model VR glasses, which requires high scanning accuracy. The shape of the workpiece is complex, with different contour shapes on each surface and many curved surfaces. The use of traditional measurement methods is very cumbersome and time-consuming. And it is not easy to accurately and quickly measure and detect the structural appearance data of VR glasses.Co3d solutionBased on the issues and scann...
      More
    • Reverse design of precision small parts
      Reverse design of precision small parts
      Release Time： 2023 - 08 - 23
      Parts are the basic components assembled into machines, instruments, and various equipment. Belonging to small and fragmented objects. The customer needs to digitize the parts (data collection, data processing) to further achieve analysis and reverse design.Product physical image Practical problems    The overall volume of the workpiece is small, with a diameter of only 4cm. The surface is irregular with many details, and the surface is black. According to customer requirements, the scanning accuracy is high, and the data is complete. Using traditional scanning methods, it is difficult to achieve complete data acquisition.Scan on-site images Co3d solution    For precision small parts, Hualang 3D engineers use a handheld 3D scanner HOLON A22 for comprehensive s...
      More
    • Nuclear magnetic resonance instrument shell scanning
      Nuclear magnetic resonance instrument shell scanning
      Release Time： 2023 - 05 - 13
      Nuclear magnetic resonance instrument shell scanningAt present, most hospitals rely on imported nuclear magnetic resonance imaging (MRI) instruments, and the manufacturing of precision instruments has become a difficult pain point to overcome in terms of high-precision requirements. Equipment manufacturers need a high-precision detection method to conduct three-dimensional scanning of the shell sample in order to pursue higher accuracy in the manufacturing process of the shell.Practical problemPrecise instruments and equipment require higher precision. Hualang handheld 3D scanner uses its self height precision scanning to meet customer needs.Physical image of the shell of the nuclear magnetic resonance instrumentPhysical image of the shell of the nuclear magnetic resonance instrumentSoluti...
      More
    • 3D scanning of refrigerator drawers
      3D scanning of refrigerator drawers
      Release Time： 2023 - 04 - 24
      3D scanning of refrigerator drawersFor the relatively mature market-oriented refrigerator industry, high-precision measurement methods are required for the development of new refrigerators in the early stage to ensure the consistency of finished product assembly in the later stage.Practical problemThere is no better solution for the size detection of refrigerators, and relying on traditional measurement methods has significant errors. Customers are seeking a better solution.Scan site image of refrigerator drawerSolutionsUsing 3D scanning technology, measure the overall 3D data of the refrigerator cabinet, visually scan in real-time, and synchronously generate dataSmooth scanning, multi line blue light data collection, complete the overall data measurement of the refrigerator drawer within ...
      More
  • Mould testing
    • 3D inspection of automotive glass
      3D inspection of automotive glass
      Release Time： 2023 - 10 - 31
      Car glass is an essential part of car body accessories, mainly playing a protective role. A well-known automotive parts production company hopes to obtain the contour of the glass for subsequent quality testing.Physical image of car glassPractical problems  It is necessary to quickly obtain three-dimensional data and contour of glass. The glass itself has a special material, and the surface color is transparent and curved. Traditional measurement methods are not accurate enough to meet the detection requirements.Physical image of car glassCo3d solution  Spray imaging agent to improve the contrast of the substrate on the sample surface and obtain better scanning data. Hualang engineers use a 3D handheld 3D laser scanner HOLON B71 for automotive glass inspection, with a scanning sp...
      More
    • 3D inspection of gears
      3D inspection of gears
      Release Time： 2023 - 07 - 26
      China is in a period of accelerated industrialization, marketization, and urbanization, as well as a period of consumption expansion and structural upgrading. The equipment manufacturing industry will face rare development opportunities, providing huge market space for the development of gears.Gear physical image面临问题| Practical problemsThe customer needs to measure the surface profile of the gear and the surface profile of all gears, whether the diameter of the holes on both sides is the same, as well as the deviation between coaxiality and clamping groove. The shape is complex and irregular, and the grooves on each side are different with many dead angle holes. There are many 3D dimensions that need to be measured. The use of traditional measurement methods is very cumbersome, time-consum...
      More
    • Inspection with inspection tools
      Inspection with inspection tools
      Release Time： 2023 - 07 - 06
      Inspection tools are simple and convenient tools used by industrial production enterprises to control various sizes of products, improve production efficiency and control quality. They are suitable for large-scale production of products. Due to the certain loss of molds caused by long-term use, it is necessary to test whether the products are still within the qualified range of useProduct physical image Practical problems    Customers have high requirements for the accuracy of detection data, with small scanning errors, fast speed, and the ability to efficiently complete work. The mold has a large volume and is not easy to move. There are many uneven details on the surface, and the convenience of the contact measurement method is not high. Scan on-site imagessolution...
      More
    • 3D inspection of large molds
      3D inspection of large molds
      Release Time： 2023 - 06 - 13
      The mold industry, as the foundation of industrial manufacturing production, has become a major indicator of the level of manufacturing industry based on its production technology and level. A well-known mold manufacturing enterprise in Tianjin needs to measure a large mold (2m long and 1.4m wide), and test the flatness, hole center distance, hinge position, and other data on the surface of the mold after production and processing Physical drawing of the moldPracical problems1. Due to the large volume, heavy weight, and complex shape of the mold, customers require fast work efficiency to accelerate the process of work. And there are strict requirements for the scanned data, with accurate data analysis, small errors, and high accuracy.2. Simply using traditional methods to measure diff...
      More
    • 3D scanning of sand castings
      3D scanning of sand castings
      Release Time： 2023 - 04 - 24
      3D scanning of sand castingsSteel, iron, and most non-ferrous alloy castings can be obtained by sand casting method. Due to the low cost and easy availability of molding materials used in sand casting, the mold manufacturing is simple, and can adapt to single piece production, batch production, and mass production of castings. For a long time, it has been a basic process in casting production.Physical Drawing of Sand CastingPracical problemsIn order to ensure that the sand mold and core produced have a certain strength and do not deform or damage during transportation, molding, and pouring of liquid metal, it is generally necessary to add sand binder in the casting to bond the loose sand particles into sand. It is very difficult to detect using traditional techniques.Physical Drawing of Sa...
      More
  • Educational equipment
    • Cast Copper Sculpture Scanning
      Cast Copper Sculpture Scanning
      Release Time： 2023 - 06 - 28
      Sculpture art is a means of awakening humanity's yearning for beautiful things and triggering thinking. Character sculpture is the most popular art that can display a social and cultural atmosphere. Sculpture art contains the author's ideas that resonate through visual appreciation to achieve the function of propaganda and decoration. Through the author's knife and chisel, you can imagine the era it lived in and 'listen' to it tell the past and history. In a park in Shenzhen, there are many famous sculptures from ancient and modern times, both at home and abroad.On site physical imagePracical problemsThe customer wants to obtain the 3D display data map through the 3D scanner. By using 3D printing technology, lay the foundation for subsequent display and reproduction. Du...
      More
    • Reverse design of pure copper ornaments
      Reverse design of pure copper ornaments
      Release Time： 2023 - 04 - 24
      Reverse design of pure copper ornamentsCopper handicraft ornaments may seem very simple, but in fact, the production process of modern copper handicraft ornaments is not just a simple process of assembly and stacking, but requires professional casting technology and precision craftsmanship.Behind a series of complex processes of pure copper handicraft ornaments, it has brought some difficulties to the early model development and finished product transformation. The traditional development and reverse process is complex and takes a long time. In order to pursue a simple and convenient reverse process, manufacturers decided to use Hualang handheld 3D scanner to conduct 3D measurement of pure copper ornaments.Scanning physical image of pure copper ornamentsPracical problemsReflective material...
      More
    • Three dimensional scanning of acupuncture bronze figure
      Three dimensional scanning of acupuncture bronze figure
      Release Time： 2022 - 08 - 18
      Three dimensional scanning of acupuncture bronze figureAcupuncture bronze man is a model of human meridians and acupoints invented by ancient Chinese physicians for acupuncture and teaching. Acupuncture bronze man plays an important role in the history of Chinese medicine. The whole body of the bronze man is cast from bronze. In order to accurately restore the positions of the meridians and acupoints of the bronze man, modern three-dimensional measurement technology has created a perfect continuation of the essence of ancient Chinese medicine.针灸铜人实物图Pracical problems1. The whole body of the bronze man is cast from bronze, and the surface is reflective. The customer requires that the developer cannot be sprayed;2. There are many meridian and degree details on the bronze man. The customer re...
      More
    • Hard hat reverse design
      Hard hat reverse design
      Release Time： 2020 - 04 - 16
      Hard hat reverse designA hard hat refers to a hat that protects a person's head from damage caused by falling objects and other specific factors, and is composed of a shell, a cap lining, a chin strap, and accessories. Each helmet has certain technical performance and scope of application. As a safety protection, it has great requirements on the quality of the materials used and the rationality of the design. Manufacturers require scanning helmets to do reverse modeling and make corresponding changes to design improvements.Hard hat scanning scenePractical problemsThe helmet shell has a large radian and holes around it. It is not accurate enough to obtain data using traditional scanning methods. It is impossible to perform a complete measurement of the curvature of the surface, so it ca...
      More
    • 3D scan of Venus sculpture
      3D scan of Venus sculpture
      Release Time： 2020 - 01 - 10
      3D scan of Venus sculptureVenus sculpture is an art treasure, carved by hand with a knife. Carving sculptures by hand is a long and large amount of work, and it is difficult to control the accuracy of details. Therefore, it is difficult to rely on hand carving for mass production. The 3D scanning technology can be used to open the mold to make it meet the needs of the public. This can not only speed up production efficiency, but also save labor costs, and it has high accuracy.Venus live shotPractical problemsThe surface texture of Venus sculpture is remarkable. It is a humanoid sculpture with obvious features and pleats. Both the posture and the posture have the power of God. Customers need to have a high degree of restoration and high scanning accuracy, which meets the needs of the market...
      More
  • Automobile traffic
    • Automobile reverse design
      Automobile reverse design
      Release Time： 2016 - 08 - 10
      By a well-known car company commissioned to scan the vehicle's three-dimensional data, optimize the performance of the car. In the understanding of the actual situation, Hualang 3D technology engineers use 3D Photogrammetry System HL-3DP + 3D scanner HL-3DW, quick access to car body and wheel arch data, optimization of drag racing.The use of traditional methods not only spend a lot of time and huge investment, can not meet the actual requirements of the team. D according to the problems faced by the team, the proposed solution used in the solution: three-dimensional Photogrammetry System (HL-3DP) + 3D scanner (HL-3DW) to obtain the car body and wheel arch data. The car gets out of the car after the appearance of manufacturing data model wind tunnel experiment, test the drag coefficient...
      More
    • Reverse engineering - Parts Market
      Reverse engineering - Parts Market
      Release Time： 2016 - 08 - 22
      HuaGuang 3D The advantages of the solutionReverse engineering requires the acquisition of components with a variety of shapes and complexity, and may be required to be measured in any type of environment. Due to its excellent portability, 3D HuaGuang can be collected directly in the design studio, can also be collected at the customer site, such as production sites (even in small car body shop).Since the designer wants to rebuild the functional design of the parts, the collection must be accurate and can provide all the information necessary to rebuild the new reference model for the parts to be manufactured. 3D HuaGuang will provide a complete and accurate mesh model.Compared with the traditional measurement methods, 3D HuaGuang solution can help save a lot of time. The necessary reverse ...
      More
    • A prototype of auto parts detection
      A prototype of auto parts detection
      Release Time： 2016 - 09 - 09
      HuaGuang 3D The advantages of the solution　　A prototype of the automotive industry in the detection of collection of a variety of appearances and the complexity of the size of the components, and may need to be measured in any type of environment. Due to its excellent portability, 3D HuaGuang can be implemented in the metrology laboratory collection, can also be in the customer's work site (for example, the production site or supplier) for collection.The inspectors wish to use digital model to assess the actual component, so the acquisition must be accurate and complete 3D model must include all the information needed to detect. 3D HuaGuang will provide a complete and accurate mesh modelCompared with the traditional measurement methods, 3D HuaGuang solution can help save a lot of time....
      More
  • Aerospace
    • Quality control / detection
      Quality control / detection
      Release Time： 2016 - 08 - 15
      Rapid measurement, the overall size of the detection time of large workpieces such as aircraft tail in 1 hours, time measuring parts of small workpieces such as aircraft or even less than 15 minutes; in view of the quality of aviation products extremely demanding and the shape size and surface complexity are not the same, the 3D scanning system can detect aircraft parts. First scan of the parts, due to the use of non-contact scanning for complex curved surface parts soft and easily broken, unable to reach parts of the probe can easily scan, reduce the scan time of the workpiece to complete, compared with the CAD model, the color encoding error chart shows the deviation and deviation, CAD data is given for correction.All parts of the production line need to be verified by 3D, which can be r...
      More
    • Aerodynamics and stress analysis
      Aerodynamics and stress analysis
      Release Time： 2016 - 08 - 12
      Thrust - before the aircraft began to move, the thrust must be applied. The aircraft continues to move, the speed increases until the thrust and resistance are equal. In order to maintain a constant airspeed, like lift and gravity must be equal in order to maintain a stable flight altitude, thrust and resistance must be equal. Assuming that in the straight flight, the engine power is reduced, the thrust will fall, the aircraft speed will slow down. As long as the aircraft would have been less than thrust resistance, slow down, know that it is not enough to support the flight airspeed. 1.Mold / model 3D scanA preliminary air flow analysis for the following types of components to the CFD model:A. wingB. bodyC. hoodD. exhaust mixerE. external storage tankF. through the CAD application to...
      More
    • Repair and maintenance
      Repair and maintenance
      Release Time： 2016 - 08 - 15
      The use of aircraft to scan data can be compared to the damage after the body, more intuitive to see the site of injury, can provide the most reasonable direct repair scheme of aircraft damage, improve the safety of the aircraft, can also evaluate the quality of the repaired parts, whether can give accurate judgment to take off again. Aircraft maintenance can also through comparison, more intuitive to see the deformation or displacement of parts, these parts previously indistinguishable to the naked eye easily scan out of repair, make the detection process more complete. Data can also be stored in a permanent document, to provide a more solid theoretical basis for the subsequent repeated repairs.A. damage assessmentB. for the renovation of part of the consistency assessment to modify the m...
      More
  • Heavy equipment manufacturing
    • Detection of rough castings and forgings
      Detection of rough castings and forgings
      Release Time： 2016 - 08 - 13
      HuaGuang 3D The advantages of the solution　　Detection of castings and forgings requires the acquisition of various shapes and sizes of the components of the complex, the acquisition process may be performed in any type of environment. With its excellent portability and multi functionality, 3D HuaGuang can be directly in the foundry, the customer's housing, production sites or suppliers to perform any part of the collection.Quality inspection personnel or operating personnel usually need to use the corresponding digital models of physical components to assess their. Therefore, the collected data must be accurate, and the 3D model must contain all the information needed to complete the test.3D HuaGuang will provide a complete and accurate mesh model. Compared with the traditional measure...
      More
    • Industrial equipment spare parts development
      Industrial equipment spare parts development
      Release Time： 2016 - 08 - 13
      Because all of our proprietary products are based on the foreign advanced technology, whether to scan vehicles or parts size, regardless of whether there is around the dirt, dust, wind, temperature or other extreme conditions, can provide reliable and highly accurate measurement data.Before designing an agricultural, construction or mining equipment spare parts, the designer must extract the dimensions of the vehicle or equipment. In order to ensure good coordination and performance, the dimensions must be accurate and complete.
      More
    • Detection of rough castings and forgings
      Detection of rough castings and forgings
      Release Time： 2016 - 08 - 13
      HuaGuang 3D The advantages of the solutionDetection of castings and forgings requires the acquisition of various shapes and sizes of the components of the complex, the acquisition process may be performed in any type of environment. With its excellent portability and multi functionality, 3D HuaGuang can be directly in the foundry, the customer's housing, production sites or suppliers to perform any part of the collection.Quality inspection personnel or operating personnel usually need to use the corresponding digital models of physical components to assess their. Therefore, the collected data must be accurate, and the 3D model must contain all the information needed to complete the test.3D HuaGuang will provide a complete and accurate mesh model. Compared with the traditional measureme...
      More
  • New energy
    • Analysis of power generation turbine components
      Analysis of power generation turbine components
      Release Time： 2016 - 09 - 09
      Turbine component analysis　　HuaGuang 3D The advantages of the solution　　Turbine component analysis may require the acquisition of arbitrary shape and complexity of the parts in an unstable environment. In addition, parts are usually located in the hard to reach position. Due to its excellent portability, compact size and built in the parts of the coordinate system function, even if you need to scan directly in the spiral case, 3D HuaGuang can also be directly on the turbine device to perform the collection.Because the quality of the turbine components is critical to a good working condition, the acquisition must be accurate and include all the information needed to assess the status or to create a complete 3D dimensional model. 3D HuaGuang scanner is an ideal equipment to provide a complet...
      More
    • Power generation and energy industry testing 3D modeling
      Power generation and energy industry testing 3D modeling
      Release Time： 2016 - 08 - 12
      Whether it is the reverse process, detection, repair or transformation of power generation components, 3D HuaGuang to provide reliable, advanced portable 3D measurement technology for the power market. Small spaces and difficult to access components are no longer a problem, because of its well-known portability and small size makes them available in any place to collect measurement data. Our data accuracy is among the best in the market, while TRUaccuracy technology ensures the stability of the measurement setup, so that the device can be measured in an unstable environment
      More
    • Solutions for New Energy Wind and Power Industry
      Solutions for New Energy Wind and Power Industry
      Release Time： 2019 - 05 - 17
      Huaguang 3-D is based on the frontier of industrial 3-D measurement technology. It devotes itself to the 3-D digital manufacturing of industrial products. It develops and manufactures photographic 3-D scanners, hand-held 3-D laser scanners, 3-D photogrammetry systems and 3-D motion capture systems. Main applications: reverse engineering, three-dimensional detection, three-dimensional printing and product three-dimensional digitization and other fields.Huaguang 3D brings you:Scanning data integrity (large-scale comprehensive scanning, accurate acquisition of complete three-dimensional data)Because the scanned workpiece in energy equipment is often large and difficult to move. It is difficult to obtain complete and accurate data by using traditional measurement methods.Three-dimensional scan...
      More
    • Analysis of wind turbine blade components
      Analysis of wind turbine blade components
      Release Time： 2016 - 08 - 12
      We selected material and process design, wind turbine blades, are the main factors determining the wind power device performance and power, affect the unit cost of wind power generation, in order to improve the efficiency and reduce the cost of the fan two factors, making positive development of large leaves. Generally speaking, wind blade length of a few meters, or even tens of meters, so large in size, with little or no previous measuring equipment suitable for 3D measurement can be performed on it, that is to use laser total station 3D measurement, 3D data also just get the key points, slow measurement speed and low accuracy.1 scanning data integrity (large scale comprehensive scanning, accurate access to complete three-dimensional data)The workpiece is often large and difficult to move...
      More
  • Ship engineering
    • Application of 3D scanner in ship engineering
      Application of 3D scanner in ship engineering
      Release Time： 2016 - 09 - 10
      Ship engineering is the concentrated embodiment of the advanced manufacturing technology. Measurement, whether it is for the mapping of components, or parts of the test, does not allow any error, the measurement of the requirements can be used to describe the harsh. In the process of manufacturing, weight loss and safety is the ultimate goal of two, the requirements continue to optimize the component design and material performance, so lightweight, integrated.Ship engineering domain detection of parts of the past more than the use of contact, such as the three coordinate measuring machine, special measuring tools, the use of the method of measuring parts of the surface shape. The efficiency of this method is not high, it is affected by human factors, and it is easy to go wrong, there are s...
      More
    • Marine engineering industry
      Marine engineering industry
      Release Time： 2016 - 08 - 15
      Ship and ocean engineering structures, the design and development of submersible underwater, the main research areas are: Marine Engineering and other kinds of structural strength, stiffness, fatigue, vibration and structural reliability; marine hydrodynamics; ship resistance, propulsion, stability, maneuverability and seakeeping. Some of the research achievements in China have reached the international level. Marine engineering is mainly research on the principle of ship machinery and application, with the continuous development of information technology, the application of radar and remote sensing technology, improve environmental protection requirements and more efficient use of energy, power equipment, electrical equipment, ship engine automation systems are facing new challenges and t...
      More
  • 师资队伍
    • 荣誉高级教师--（ADAWONG）
      荣誉高级教师--（ADAWONG）
      Release Time： 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国，英国，加拿大，澳洲，新西兰）·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证知名师范院校外语系师范专业毕业，毕业以来就一直从事小学、初中的教学和研究工作，6年的任教经验，特别是一年国际学校任教的经历，让我对中、外的小学生的语言学习有了更多的认识；在我的课堂中，学生的兴趣始终是我关注的出发点； 另外，语言不仅是一门语言，同时也是一种文化；更难得是的思维习惯的养成；我喜欢活跃互动的课堂形式，有趣的课堂形式利于提高学生的学习积极性，同时我也很喜欢教授学生掌握解题的关键，各类口诀梳理语法重难点是掌握的捷径！
      More
    • 荣誉高级教师--（LINDA）
      荣誉高级教师--（LINDA）
      Release Time： 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国，英国，加拿大，澳洲，新西兰）·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证        Hello，我是LINDA，毕业于广州著名学府的英语教育专业，擅长地道的口语教学，多年的口语教学经验告诉我，口语学习必须要大胆开口说，英语是一种语言，重要的是懂得如何交流和沟通。流利的口语更可以提高语感，有助于更容易学习英语。我喜欢活跃互动的课堂形式，有趣的课堂形式利于提高学生的学习积极性，帮助你找到适合自己的英语学习方法、掌握解题的关键，独特而有个性的教学风格是我的课堂。
      More
    • 荣誉高级教师--（Sammi）
      荣誉高级教师--（Sammi）
      Release Time： 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国，英国，加拿大，澳洲，新西兰）·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证最受学生欢迎的英语女神。 教学成绩：2013年获评明师教育最受学生喜爱女教师金奖； 2014年班均人数、带班量居英语科头名，并创下英语科目班均人数最多纪录； 曾参加高考口语，一模口语评卷工作，英语口语界权威代表。 教学特点：10年丰富的教学经验，执教高三保证班超过6年。自创语法填空（Grammar）稳夺8空技巧，小作文首句法，20分钟高分大作文速成法，助你挑战速度极限。2013年以来Sammi所带的班期期爆棚，人数居高不下，被学生奉为英语女神。
      More
    • 荣誉高级导师--（Pow）
      荣誉高级导师--（Pow）
      Release Time： 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国，英国，加拿大，澳洲，新西兰）·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证        拥有全国认可的英语专业最高等级证书---TEM-8,极具英语权威。刻苦钻研Task-based Language Teaching(TBLT)教学法，熟练掌握Reading, Speaking, Listening, Writing课堂教学技能，在教坛凭借新颖教学方法，获得家长和学生一致好评，获得“最佳教师奖”。 “3P”魅力(Professional, Passionate, Patient)专业+热情+耐心=100% 魅力 Rachel执教的英语课堂生动有趣
      More
    • 荣誉高级导师--（Sarah）
      荣誉高级导师--（Sarah）
      Release Time： 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国，英国，加拿大，澳洲，新西兰）·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证经验丰富·考点明确：Sarah具有丰富的教学经验，长期担任明师初中英语教材组成员，负责各大名校试卷分析工作，熟知初中各年级英语考点，提炼各类“易错题”、“高频题”;善于归纳解题方法和构建、整理知识结构体系;同时擅长针对考试题型演示解题方法，炮制最适合学生的“抢分秘笈”。 幽默课堂·轻松学习：Sarah以独特的“栋笃笑”风格，打造具有个人特色的幽默课堂，为学生们提供轻松、愉悦的学习环境。对于初中英语较难的知识点，Sarah善于以生动有趣的例子诠释，加速学生的理解及记忆。
      More
  • 下载中心
    • LED单元板
      LED单元板
      Release Time： 2013 - 12 - 02
      电器企业将转战三、四级市场家器产品的销售主要集中在城市一、二级市场，三、四级市场潜在需求还没充分挖掘。一、二级市场竞争激烈，必然伴随着运营成本的提高，缩小了利润空间。而在稳定发展的经济大环境下，消费水平和消费能力的日渐形成，三、四级市场会日渐启动。电器企业必将加速转战三、四级市场的步伐。产品的系列化、渠道的多样化、人员的素质化、营销的战略化是企业全面攻占新市场必不可少的战略武器。电器企业必须不断地增强多元化的综合竞争力。
      点击下载
    • LED条屏，车载屏
      LED条屏，车载屏
      Release Time： 2013 - 12 - 02
      LED车载屏是安装在车上的，使用专用电源供电，通过控制卡接收、输出数据给点阵LED单元板，通过控制点阵的亮灭显示文字、图片、动画、视频的设备。一般有出租车、公交车、警车安装LED车载屏。它是随着LED显示屏的迅速发展而独立出来的一套LED车载显示系统，与普通的门头屏、固定不移动的LED显示屏相比，它对稳定性、抗干扰性、防震动、防尘等方面的要求更高。迅灵车载屏在各个方面都有严格的把控、对产品的要求更高。
      点击下载
Top
Case Mould testing
3D inspection of automotive glass
3D inspection of automotive glass
来源:
Release Time: 2023 - 10 - 31
Car glass is an essential part of car body accessories, mainly playing a protective role. A well-known automotive parts production company hopes to obtain the contour of the glass for subsequent quality testing.Physical image of car glassPractical problems  It is necessary to quickly obtain three-dimensional data and contour of glass. The glass itself has a special material, and the surface color is transparent and curved. Traditional measurement methods are not accurate enough to meet the detection requirements.Physical image of car glassCo3d solution  Spray imaging agent to improve the contrast of the substrate on the sample surface and obtain better scanning data. Hualang engineers use a 3D handheld 3D laser scanner HOLON B71 for automotive glass inspection, with a scanning sp...
查看更多>>
3D inspection of gears
3D inspection of gears
来源:
Release Time: 2023 - 07 - 26
China is in a period of accelerated industrialization, marketization, and urbanization, as well as a period of consumption expansion and structural upgrading. The equipment manufacturing industry will face rare development opportunities, providing huge market space for the development of gears.Gear physical image面临问题| Practical problemsThe customer needs to measure the surface profile of the gear and the surface profile of all gears, whether the diameter of the holes on both sides is the same, as well as the deviation between coaxiality and clamping groove. The shape is complex and irregular, and the grooves on each side are different with many dead angle holes. There are many 3D dimensions that need to be measured. The use of traditional measurement methods is very cumbersome, time-consum...
查看更多>>
Inspection with inspection tools
Inspection with inspection tools
来源:
Release Time: 2023 - 07 - 06
Inspection tools are simple and convenient tools used by industrial production enterprises to control various sizes of products, improve production efficiency and control quality. They are suitable for large-scale production of products. Due to the certain loss of molds caused by long-term use, it is necessary to test whether the products are still within the qualified range of useProduct physical image Practical problems    Customers have high requirements for the accuracy of detection data, with small scanning errors, fast speed, and the ability to efficiently complete work. The mold has a large volume and is not easy to move. There are many uneven details on the surface, and the convenience of the contact measurement method is not high. Scan on-site imagessolution...
查看更多>>
3D inspection of large molds
3D inspection of large molds
来源:
Release Time: 2023 - 06 - 13
The mold industry, as the foundation of industrial manufacturing production, has become a major indicator of the level of manufacturing industry based on its production technology and level. A well-known mold manufacturing enterprise in Tianjin needs to measure a large mold (2m long and 1.4m wide), and test the flatness, hole center distance, hinge position, and other data on the surface of the mold after production and processing Physical drawing of the moldPracical problems1. Due to the large volume, heavy weight, and complex shape of the mold, customers require fast work efficiency to accelerate the process of work. And there are strict requirements for the scanned data, with accurate data analysis, small errors, and high accuracy.2. Simply using traditional methods to measure diff...
查看更多>>
3D scanning of sand castings
3D scanning of sand castings
来源:
Release Time: 2023 - 04 - 24
3D scanning of sand castingsSteel, iron, and most non-ferrous alloy castings can be obtained by sand casting method. Due to the low cost and easy availability of molding materials used in sand casting, the mold manufacturing is simple, and can adapt to single piece production, batch production, and mass production of castings. For a long time, it has been a basic process in casting production.Physical Drawing of Sand CastingPracical problemsIn order to ensure that the sand mold and core produced have a certain strength and do not deform or damage during transportation, molding, and pouring of liquid metal, it is generally necessary to add sand binder in the casting to bond the loose sand particles into sand. It is very difficult to detect using traditional techniques.Physical Drawing of Sa...
查看更多>>
Three dimensional inspection of automobile dies
Three dimensional inspection of automobile dies
来源: original
Release Time: 2022 - 12 - 06
Three dimensional inspection of automobile dies      Mold manufacturing is a long cycle and complex process manufacturing process, which involves a lot of repeated measurement and repair work. Therefore, production efficiency has become a recognized outstanding problem in the mold industry. In the face of increasingly fierce market competition, how to improve the production inspection efficiency is the consistent goal pursued by mold manufacturers       Site Drawing of Automobile Mold ManufacturingField drawing of automobile mould面临的问题| Practical problems       Automobile die has the characteristics of large size, heavy weight and complex shape and surface. With the increasing precision of die, the requirements for precision of di...
查看更多>>
Wind blade mould inspection
Wind blade mould inspection
来源: original
Release Time: 2021 - 12 - 29
Wind blade mould inspectionWind power plays an important role in the energy strategy of the world and China. Wind power blade is one of the key components. The design and manufacture of blade mould is one of the key technologies to determine the aerodynamic performance of blade. Therefore, the data acquisition of blade mold to detect the accuracy of mold is conducive to improve the mold design and manufacturing level and provide an important guarantee for the blade manufacturing quality of wind power industry.Practical problems1. The blade die has a large volume. The customer requires that the scanning time is short, the work efficiency should be fast, and the work process should be accelerated. It also has strict requirements for the scanned data, accurate data analysis, small error and h...
查看更多>>
Three-dimensional inspection of the inner mold of the hydraulic pump
Three-dimensional inspection of the inner mold of the hydraulic pump
来源: original
Release Time: 2021 - 08 - 26
Three-dimensional inspection of the inner mold of the hydraulic pumpThe hydraulic pump is the power component of the hydraulic system. It is driven by an engine or an electric motor. It sucks in oil from the hydraulic tank to form pressure oil and discharge it to the actuator. Due to the high complexity and precision of the product, it is required. The customer wants to measure the distance between the center positions of the hydraulic pump and the flatness of the analysis plane.On-site entity mapPractical problemBecause the surface of the scanned object is complex and the composition structure is diverse, the traditional measurement method is time-consuming and laborious in the detection process, and the cumulative deviation is large, which directly affects the detection result, and some ...
查看更多>>
3D scanning case of plastic parts
3D scanning case of plastic parts
来源: original
Release Time: 2021 - 08 - 06
3D scanning case of plastic partsPlastic parts is an abbreviation for combined molds used for compression molding, extrusion molding, injection molding, blow molding and low foam molding. Through coordinated changes, a series of plastic parts of different shapes and sizes can be processed. In the process of plasticizing and strengthening, it is prone to deformation and inaccurate installation hole positions, which will have an impact on the later installation work.On-site entity mapPractical problemPlastic parts have complex shapes, many components, and detailed holes are not easy to scan. Using traditional three-coordinate scanning equipment, the scanning time is long, and the scanning of fine parts is not complete, which easily leads to low data accuracy. In recent years, handheld 3D sca...
查看更多>>
Three-dimensional inspection of wheel mold
Three-dimensional inspection of wheel mold
来源: original
Release Time: 2021 - 07 - 16
Three-dimensional inspection of wheel moldThe wheel hub is the rotating part of the wheel core connected by the steel column of the tire inner profile, that is, the metal component that supports the center of the tire and is mounted on the shaft. The center hole of the hub is the part used for the fixed connection with the vehicle, that is, the position of the concentric circle between the center of the hub and the hub. This diameter size affects whether the installation of the hub can ensure that the geometric center of the rim can be consistent with the geometric center of the hub.Site entity mapPractical problemThe customer needs to scan the wheel hub to obtain data to measure the diameter size. Obtain accurate three-dimensional data as a reference value, reduce numerical errors in prod...
查看更多>>
Three-dimensional inspection of audio shell
Three-dimensional inspection of audio shell
来源: original
Release Time: 2021 - 07 - 06
Three-dimensional inspection of audio shellThe audio frequency is extremely high now, and it is used in many occasions or at home. The market produces speakers that are small in size and easy to carry according to their needs. The high-power output is suitable for outdoor use or placed at home. The small and exquisite style has high requirements for the installation hole position, and the hole position needs to be tested to avoid errors in the assembly.On-site entity mapOn-site entity mapPractical problemsThe speaker shell is small, with many holes in the inside, and the design is more complicated. The customer uses the machine assembly line for production and installation, and each step must be set up in advance without making mistakes. It is necessary to accurately know the spacing betwe...
查看更多>>
3D scanning of valve mold
3D scanning of valve mold
来源: original
Release Time: 2021 - 06 - 23
3D scanning of valve moldValves are pipeline accessories used to open and close pipelines, control flow, adjust and control the conveying medium. From the simplest shut-off valve to the various valves used in the extremely complex automatic control system, there are many varieties and specifications. The valve used by the customer does not have the original drawing, and the size of the valve mold needs to be measured. Therefore, three-dimensional scanning technology is used to obtain data and accurately measure.Field scanPractical problemsThe valve mold has two parts, a front mold and a back mold, which are bulky and inconvenient to move. The customer requested that the scanning and inspection work be completed in a short time, and the size measurement should be completed without drawings....
查看更多>>
3D inspection of mould
3D inspection of mould
来源: original
Release Time: 2021 - 03 - 03
Mold is a tool used to make molding products. In industrial production, it is used for injection molding, blow molding, extrusion, die casting or forging, smelting, stamping and other ways to get the required products. The mold is easy to break, bend and gnaw in the process of use. It is necessary to record the damage in detail to provide information for finding and solving problems. So we need to use 3D scanning technology to detect and find the problem.On site scanning of mould Practical problemsThe process of the workpiece is complex, and there are some details such as grooves, curved surfaces, holes and so on, which are difficult to detect manually. In addition, the object is a combination, and some details cannot be measured manually. It means that the quality can not be controll...
查看更多>>
Three dimensional inspection of tubing
Three dimensional inspection of tubing
来源: original
Release Time: 2021 - 01 - 21
Tubing is a pipeline that transports crude oil and natural gas from oil and gas reservoir to the surface after drilling, which is used to bear the pressure generated in the process of exploitation. Therefore, it is easy to be damaged in the process of use, which will affect the use of the function. Therefore, it is necessary to use the 3D scanner to collect the data of the tubing, make comparative analysis, check the existing problems, and make changes in time, so as to avoid affecting the subsequent work arrangement.Site scanPractical problemDue to the influence of shape characteristics, the traditional 3D scanning equipment can not collect accurate data. So customers want to find a 3D scanner that can solve this problem.Site scanCo3d solutionOur company uses a hand-held three-dimens...
查看更多>>
3D inspection of mould
3D inspection of mould
来源: original
Release Time: 2020 - 12 - 29
Mold is a tool used to make shaped articles, which is composed of various parts. It mainly realizes the processing of the shape of articles by changing the physical state of the formed materials. Under the action of external force, the blank becomes a tool with specific shape and size. The mould is a precision tool with complex shape, which can bear the expanding force of the blank. It has high requirements for all aspects, so it needs to carry out three-dimensional scanning for testing.Site scan Practical problemThe scanning object is black with irregular surface structure and a concave area. Customers need to do mold testing, so the scanning data requirements are high, scanner accuracy is high, can accurately complete the detection work. Using the general three-dimensional scanner, ...
查看更多>>
Shell 3D inspection
Shell 3D inspection
来源: original
Release Time: 2020 - 10 - 20
Shell 3D inspectionThe shell is made of stainless steel as the main raw material. As there is no original design drawing, repair and redo cannot be carried out in the later damage process. Therefore, the customer wants to adopt a new type of 3D scanning technology to collect shell data for reverse design, and later design processing is put into production.Site scanFacing problems | Practical problemsCustomers require convenient operation, fast scanning speed, and high accuracy to facilitate future work and speed up production steps. The surface of the shell is reflective and both sides are smooth and curved. The space inside is small and there are dead corners that are not easy to scan, which brings difficulty to the scanning work.Site scanSolution | Co3d solutionAccording to the problems ...
查看更多>>
Screw scan
Screw scan
来源: Original
Release Time: 2020 - 08 - 19
3D scanning of screwsThe main function of the screw is to connect the two workpieces together for fastening. Screws are used in almost all machines. The screw itself is metal, which is easily corroded by acid and alkali or rust, which affects the performance and aesthetics of the screw. Therefore, the screws are often coated with a coating to prevent corrosion. The three-dimensional data of the surface of the screw is obtained with the aid of three-dimensional scanning technology to calculate the surface area of the screw.Site scanFacing problems | Practical problemsThe size of the screw is small, and the thread gap is also small. To complete high-precision scanning, the three-dimensional scanner used has high requirements and can accurately obtain the scanned data. If a fixed scanner is u...
查看更多>>
3D scanning of plastic parts
3D scanning of plastic parts
来源: original
Release Time: 2020 - 08 - 13
3D scanning of plastic partsPlastic parts are widely used and are replacing traditional metal parts in different fields to achieve the goal of simplifying product structure and saving manufacturing costs. While demand increases, the speed of production must also be accelerated. With the development of 3D scanning technology, it is widely used and can scan to obtain object data for later design changes, product development, and speed up production efficiency.Site scan面临问题| Practical problemsThe structure of scanning plastic parts is complicated, the surface has holes, and the corners are easy to form dead corners. Customers require that they cannot be sprayed and applied. The scanning work can be completed quickly and the scanning data accuracy is high. Using the traditional scanning method...
查看更多>>
3D inspection of machined parts
3D inspection of machined parts
来源: Original
Release Time: 2020 - 07 - 16
3D inspection of machined partsThe processed parts are the workpieces produced by the mechanical processing technology, and are easily deformed during the manufacturing process. Therefore, the processed parts need to be inspected to control the product quality of each process and improve the product quality. Object data can be analyzed and compared. The customer wants the 3D scanning technology to scan and obtain the data of the processed parts for inspection.On-site scan of processed partsOn-site scan of processed partsPractical problemsCustomers need to find complete scanned high-precision data, and the data analysis effect is good, which can clearly show the problem. The customer had previously found a 3D scanning manufacturer to demonstrate the results. The accuracy of the scanned data...
查看更多>>
Three-dimensional reverse of plastic products
Three-dimensional reverse of plastic products
来源: Original
Release Time: 2020 - 06 - 08
Three-dimensional reverse of plastic productsPlastic products are a general term for life, industry and other articles processed by using plastic as the main raw material. Since there is no original design drawing, it cannot be repaired and redone during the later damage process. Therefore, customers want to adopt new three-dimensional scanning technology, collect plastic product data for reverse design, and later model or design redo.Real shot of plastic handle scenePractical problemsFor customers to reverse design plastic products, the data accuracy is required to be high, and good data can be used for later repair or redesign to make good results. Plastic products are transparent and curved.Plastic handle STL data chartThe traditional scanning method has certain scanning difficulty, and...
查看更多>>
Three-dimensional fence inspection
Three-dimensional fence inspection
来源: Original
Release Time: 2020 - 05 - 14
Three-dimensional fence inspectionFence is a net made of iron wire, which has many uses. The thickness of the wire and the density of the wire are different. In the use of fence nets, customers need to understand the area and density of fence nets, and they need to use objects in the later stage to perform effective data analysis and adjustment, find gaps in time, solve problems as soon as possible, and improve work efficiency.Fence net real shot mapPractical problemsThe fence mesh has a small density and a fine mesh surface. The customer requires calculating the area and measuring the density. The scanned data is complete and the accuracy is high, which requires high scanning equipment. Using traditional manual measurement, the measured density is inaccurate, the calculated area is incomp...
查看更多>>
Industrial turntable inspection
Industrial turntable inspection
来源: Original
Release Time: 2020 - 04 - 13
Industrial turntable inspectionAs the pace of social development has accelerated and the level of technological manufacturing has increased, industrial production has gradually replaced machines with manual operations to speed up production, increase work efficiency and reduce labor costs. Industrial turntables need to use three-dimensional scanning technology to scan to obtain accurate data, detect whether there is a problem, and avoid deviations in the production process.Scanning scene of industrial turntablePractical problemsThe surface part of the scanned sample is complex, irregular in shape, and has holes of different sizes, which requires high accuracy of the scanned data and reduces problems in the production process.Scanning scene of industrial turntableManual scanning or traditio...
查看更多>>
3D scanning of foam mold
3D scanning of foam mold
来源: Original
Release Time: 2020 - 03 - 27
3D scanning of foam moldThe foam molding mold is a plastic foam mold. The principle is to fill the foaming resin directly into the mold, make it heat and melt to form a gas-liquid saturated solution, and through nucleation, a large number of micro-bubble nuclei are formed and the nuclei grow to form a foam plastic part. During the use of the die, the punch is prone to breakage, bending and rupture, and is prone to damage. The customer wants to use 3D scanning technology to obtain data retention for later repair of mold damage.Scanning scene of foam filmPractical problemsThe surface structure of the foaming mold is relatively complex, with different shapes, large shapes, and obvious details in the details. You can use a 3D scanner to quickly obtain data.Scanning scene of foam filmTraditiona...
查看更多>>
3D scanning of sheet metal parts
3D scanning of sheet metal parts
来源: Original
Release Time: 2020 - 01 - 07
3D scanning of sheet metal partsSheet metal parts are products manufactured by sheet metal technology. Sheet metal parts can be used everywhere in life, and the application range is becoming more and more extensive. However, the design of sheet metal parts is an important part of the product development process. Customers use 3D scanning technology to scan and produce the sheet metal parts to obtain data, so that the design sheet metal parts can not only meet the product function and appearance requirements, but also be simple to manufacture and low in cost.Scanning scene of sheet metal partsPractical problemsThe customer needs to be able to complete the scan in a short period of time, and the scanned data has high accuracy, because the design of sheet metal parts should ensure simple stam...
查看更多>>
Reverse detection of 3D scanning of mold
Reverse detection of 3D scanning of mold
来源: Original
Release Time: 2019 - 11 - 26
Reverse detection of 3D scanning of mold This is a national key project. The customer spliced the workpiece together to detect whether the workpiece was deformed under various simulated weather environments. We found that our company uses a new measurement method, the three-dimensional scanner, to scan the product for various environmental measurements. Data comparison, corresponding improvements can be made to the workpiece, suitable for later work.Mold scan scenePractical problemsThe customer needs to scan the mold before and after various environmental measurements. The mold is relatively large and difficult to move, and the overall structure is relatively complicated, which makes scanning difficult.When using traditional measurement methods, the work process will be time consuming...
查看更多>>
Reverse design of air compressor components
Reverse design of air compressor components
来源: Original
Release Time: 2019 - 11 - 08
Reverse design of air compressor componentsThe air compressor is the main body in the air source device, which is a device that converts the mechanical energy of the prime mover into gas pressure energy, and is a pneumatic generating device for compressed air. The customer wants to scan the air compressor components for reverse design, find our company to use the advanced 3D measurement method for 3D scanning inspection, and use the high-precision 3D data as reference for later work to improve and production.Air compressor parts real shot diagramPractical problemsThe air compressor components are small, but heavy and difficult to handle. The overall contour is complex, and the middle one is rotated by a spiral shape, which easily leads to blind corner shadows, and the customer requires hig...
查看更多>>
Exhaust gas catalytic converter 3D scanning
Exhaust gas catalytic converter 3D scanning
来源: Original
Release Time: 2019 - 10 - 31
Exhaust gas catalytic converter 3D scanningCatalytic converter is the most important off-board purification device installed in the exhaust system of automobiles. It can convert harmful gases discharged from automobile exhaust into harmless gases through oxidation and reduction. The car exhaust is purified. Therefore, the catalytic converter is a very important device in the automotive parts, and it is necessary to pay attention to quality assurance and various aspects of data. A manufacturer needs to perform three-dimensional inspection and analysis on the catalyst to upgrade and improve it later.Catalyst scanning site mapPractical problemsThe exhaust gas catalytic converter is long, the surface is irregular, the detail features are obvious, the components are different in size, and the c...
查看更多>>
3D inspection of circuit boards
3D inspection of circuit boards
来源: Original
Release Time: 2019 - 10 - 26
Three-dimensional inspection of circuit boardsThe circuit board is the most active industry in the contemporary electronic components industry, and its industry growth rate is generally higher than the electronic component industry by about 3 percentage points. The 11th Five-Year Plan for China's national economic and social development proposes to upgrade the electronic information manufacturing industry. The circuit board industry will maintain rapid growth, and demand upgrading and industrial transfer are the basic driving forces for the development of the industry. Customers should also upgrade their boards based on development, and make design improvements to enhance service life and manufacturing technology.Circuit board real shotPractical problemsThere are many types of circuit ...
查看更多>>
Mold three-dimensional scanning
Mold three-dimensional scanning
来源: Original
Release Time: 2019 - 10 - 24
Mold three-dimensional scanningThe mold has a specific contour or cavity shape. It needs to withstand the expansion force of the blank during production. It has high requirements on structural strength, stiffness, surface hardness, surface roughness and processing accuracy. The mold company determines product positioning and market positioning according to the market. In order to ensure the quality of the mold manufacturing, reduce the production cost, it is necessary to improve the quality of the mold design and shorten the mold design cycle.Mold site scanPractical problemsMolds are precision tools and the shape is generally more complicated. The mold scanned for the customer has a complex surface with holes, and the hole is deep due to the thicker mold. There are protruding cylindrical c...
查看更多>>
Reverse design of mechanical parts
Reverse design of mechanical parts
来源: Original
Release Time: 2019 - 10 - 09
Reverse design of mechanical partsMechanical parts, also known as mechanical components, are the basic components of a machine and are inseparable individual parts that make up machinery and machinery. At present, the design and development of mechanical parts realizes the integration of various disciplines. It is also very important for the stability and interchangeability requirements of parts. In the production of mechanical parts, it is necessary to meet the working ability and also meet the production requirements. It is necessary to scan and detect the parts that have been produced, reverse design, and upgrade.Mechanical parts scanning sitePractical problemsThe mechanical parts are small in size, irregular in shape, and have many features and small holes. In some places, it is easy t...
查看更多>>
Gearbox 3D scanning
Gearbox 3D scanning
来源: Original
Release Time: 2019 - 09 - 26
Gearbox 3D scanningA well-known domestic enterprise needs to obtain 3D data of gearbox for 3D inspection and data comparison and analysis.Gearbox real shotPractical problemsThe gearbox has a complex surface and a large number of contour holes. The production process is prone to deformation. The production yield is not high. In order to improve the production quality of the gearbox, three-dimensional data detection is required for the gearbox. The traditional measurement method is not efficient and the cost is too high. Data is not accurate enough to be accurately detected, so quality inspection and quality control issues cannot be resolved.Gearbox detail displayCo3d solutionsUsing the handheld 3D scanner (HOLON760) to obtain high-precision 3D scan data of the gearbox, import 3D inspection ...
查看更多>>
Industrial valve mold 3D inspection
Industrial valve mold 3D inspection
来源: Original
Release Time: 2019 - 09 - 17
Industrial valve inspectionIndustrial valves are an important accessory for controlling the flow of media on industrial pipelines. They can be used to control the flow of various fluids, maintain a certain pressure at a regulated rate, and block steam drainage. However, if the connection with each part is not strong, it may cause leakage or be unusable. Need to carry out inspection and maintenance to avoid problems such as defects, leaking sealing surfaces and inconvenient use.Valve mold scanning site mapPractical problems       The overall structure of the workpiece is complicated, the hole position is large, the volume is small, and the inner wall is scanned, and the bumps are irregular, and the details are scanned a lot, which has certain difficulty.Using some conven...
查看更多>>
Engine piston three-dimensional inspection
Engine piston three-dimensional inspection
来源: Original
Release Time: 2019 - 09 - 04
Engine piston three-dimensional inspection       The piston is the 'heart' of the engine of the car. It is subject to alternating mechanical and thermal loads and is one of the most critical parts of the engine. The function of the piston is to withstand the gas pressure, and the piston pin is transmitted to the connecting rod to drive the crankshaft to rotate. The top of the piston is also a component of the combustion chamber. When the piston is working in a high temperature environment for a long time, deformation and accelerated wear will occur, and additional load will be generated. And thermal stress, while being chemically corroded by gas. Due to the important role of the piston in the engine, coupled with the reduction of the surface area, it is not cond...
查看更多>>
Rebar 3D inspection
Rebar 3D inspection
来源:
Release Time: 2023 - 01 - 03
Rebar 3D scanningSteel bars are very practical in major projects. Reinforced concrete has been widely used in the market, according to the different positions of steel bar types, there are many uses, steel bars have buckle bars, negative bars, stress bars, rack reinforcement, distribution bars, etc. Steel bars have also been favored by major projects, such as building construction steel bars are essential, railway track laying, etc.Physical drawing of rebarPhysical drawing of rebar面临的问题| Practical problemsThe customer is required to obtain the surface corrosion of the rebar and detect the degree of corrosion on the surface of the rebar in different time periods. The characteristics of steel corrosion are too small, there are many subtle changes in the surface, traditional methods are diffi...
查看更多>>
Weather radar turntable 3D scanning
Weather radar turntable 3D scanning
来源: Original
Release Time: 2019 - 09 - 25
Weather radar turntable 3D scanningWeather radar is a radar specially used for atmospheric detection. It is an active microwave atmospheric remote sensing device. Weather radar is one of the main detection tools for warning and forecasting medium and small scale weather systems. The meteorological radar transmits a pulsed radio wave to the space through a highly directional antenna, which interacts with the atmosphere during propagation. Therefore, the various components of the meteorological radar are very important, and quality assurance is required. A merchant scans and detects the weather radar turntable.Weather radar turntable real shot mapPractical problemsThe surface structure of the turntable is irregular, showing an uneven surface, and then forming more dead ends, with holes of di...
查看更多>>
Reverse design of air conditioning reversing valve
Reverse design of air conditioning reversing valve
来源: Original
Release Time: 2019 - 08 - 06
Reverse design of air conditioning reversing valveAir conditioning usage is increasing. The reversing valve is a very important component in air conditioning. It is equivalent to a control valve that changes the direction of freon flow in the air conditioner to change the function of the air conditioner to achieve cooling, heating or Switching functions such as defrosting. The reversing valve is mainly used in a heat pump type air conditioner, and there are mainly four pipes connected to it in the structure. Therefore, the design and manufacture of the reversing valve is very important. If it does not meet the requirements, it will affect the normal use of the air conditioner, and it will not perform well, and the service life will be affected. Therefore, reverse design of the reversing va...
查看更多>>
Mold three-dimensional inspection
Mold three-dimensional inspection
来源: Original
Release Time: 2019 - 08 - 01
Mold three-dimensional inspectionChina is gradually moving from a mold manufacturing country to a mold manufacturing power. As far as the domestic market is concerned, the production and demand of the mold industry are booming, the investment enthusiasm of enterprises is rising, and large technological transformation projects and new construction projects are constantly appearing. For foreign markets, China's mold industry has performed equally well. The mold industry is actively exploring emerging markets while the traditional market is steadily advancing, and even marginal markets that have been neglected in the past have been developed.Mold scanning scene mapSimply put, a mold is a tool used to make a shaped article. The tool consists of various parts. Different molds are composed o...
查看更多>>
3D scanning measurement of the volume of the wine cylinder
3D scanning measurement of the volume of the wine cylinder
来源: Original
Release Time: 2019 - 07 - 26
3D scanning measurement of the volume of the wine cylinderIt is often said that 'Ginger is old and spicy, and wine is Chen's fragrance'. If you want to have good wine, you must have a good wine storage container, that is, the wine tank. The use of wine storage in the wine tank is conducive to moisture penetration, evaporation, and accelerated aging, making the wine more mellow. Therefore, since ancient times, there has been a choice of wine storage.Wine cell site scanThe production and production of the wine tank is a complicated process, from soil screening to coloring. The middle is the selection of materials, the production of the model, the burning of the stove, the final washing and finishing, and each step requires manual effort to complete. If there is a loophole in the ...
查看更多>>
3D detection of off-road vehicle frame
3D detection of off-road vehicle frame
来源: Original
Release Time: 2019 - 06 - 13
3D inspection of door frameNowadays, the pace of social development is getting faster and faster, the demand in all aspects is constantly improving, the competition is fierce, and improvements are needed. A domestic auto company needs to test the off-road vehicle door frame and quickly obtain accurate data for comparison, so as to make reasonable modifications, improve production efficiency and save costs. Using the Hualang 3D scanner for 3D scanning to get the data is very good for the customer's desired effect.Off-road vehicle scene mapPractical problemsIt is necessary to scan the door frame components in the whole vehicle, and the door frame area is large, the contour size is different, and the peripheral hole positions are large and small. Using a conventional three-dimensional sca...
查看更多>>
Corset mold 3D scanning case
Corset mold 3D scanning case
来源: Original
Release Time: 2019 - 05 - 28
Corset mold 3D scanning caseDomestic listed company bra manufacturers need to scan the corset mold to get accurate 3D data, simulate equipment and precision detection, use Huaguang 3D scanner for high-precision scanning, data scanning results are in line with customer needs, customers feel very good about our equipment satisfaction.Practical problemsSince the surface of the bran mold has a smooth reflective surface, the customer cannot request excessive processing on the surface of the workpiece. Conventional scanners require surface dusting to scan. The bras mold has many curved surfaces and is cumbersome, and it is not easy to move at random. It requires multi-angle and multi-directional scanning and takes a long time, which brings great difficulty to the measurement work.Corset mold on-...
查看更多>>
Volkswagen mold three-dimensional inspection case
Volkswagen mold three-dimensional inspection case
来源:
Release Time: 2018 - 11 - 28
Volkswagen mold three-dimensional inspection caseA well-known Volkswagen parts supplier needs to establish a three-dimensional digital model file (CAD drawing) of the automobile mold for the three-dimensional data of the Volkswagen mold, and provide data support for the structural design, retrofit design and subsequent quality inspection of the automobile mold.Practical problems1. Volkswagen's mold is large in size and has a dark black reflective surface to increase the difficulty of scanning. The products produced are prone to deformation, so the quality control of automobile molds is particularly important, and the three-dimensional data of automobile molds has very high precision requirements.2. The traditional method of detecting (such as inspection tools, fixtures, three coordinat...
查看更多>>
Automated robot 3D scanning case
Automated robot 3D scanning case
来源:
Release Time: 2018 - 11 - 28
Automated robot 3D scanning caseA large hydraulic equipment manufacturer needs to make product improvements for automated robot components. Huaguang engineers quickly acquired high-precision 3D data of robot parts using 3DS, which shortened the product improvement cycle.Practical problems1. Since the scan data involves post-reverse engineering and quality inspection, the accuracy of the scan data is very high.2. Although the surface of the robot is relatively flat, there are many holes. The traditional measurement method not only consumes time, but also the accuracy of the acquisition is not accurate enough. Co3d solutionsAccording to the characteristics of KUKA robots, Huaguang engineers recommend the use of multi-function 3D scanner 3DS, which uses extrapolation multi-frequency phas...
查看更多>>
Ultra-large UAV mold 3D scanning case
Ultra-large UAV mold 3D scanning case
来源:
Release Time: 2018 - 11 - 28
Ultra-large UAV mold 3D scanning caseA well-known aircraft manufacturing company in Shanghai hopes to quickly obtain the appearance data of the original super large UAV mold side by means of 3D scanner, and combine the reverse engineering software to carry out secondary design of the UAV mold, accelerate the development of new products and improve production. effectiveness. Practical problems1. Since the UAV mold scan data involves the reverse engineering and quality inspection in the later stage, the accuracy of the scan data of the customer is very high.2. The size of the UAV mold is large, the surface curvature is large, and the curvature changes greatly. The traditional measurement methods (such as inspection tools, jigs, three coordinates, etc.) are very cumbersome, not only wast...
查看更多>>
Pump cover 3D scanning case
Pump cover 3D scanning case
来源:
Release Time: 2018 - 11 - 28
Pump cover 3D scanning caseA well-known pump manufacturer in China hopes to quickly obtain the appearance data of the original pump cover through the 3D scanner, carry out the secondary design of the pump cover, accelerate the development of new products, and improve production efficiency.Practical problems1. The surface of the pump cover has a large change in curvature, a complicated shape, and a groove on the surface, resulting in an incomplete amount of three-dimensional data acquired, and the secondary design of the pump cover cannot be performed.2. Traditional measuring methods (such as gages, fixtures, three coordinates, etc.) are very cumbersome and time consuming, and the pump cover cannot be accurately and quickly measured. Co3d solutionsThe pump cover is part of the pump and...
查看更多>>
Hockey stick 3D scanning case
Hockey stick 3D scanning case
来源:
Release Time: 2018 - 11 - 28
Hockey stick 3D scanning caseA hockey stick manufacturer in Guangdong has a very high arc design requirement. It is difficult for designers to design. In order to speed up the production efficiency of the hockey stick, the company hopes to use the 3D scanner to quickly scan the 3D model of the hockey stick. , reverse design.Practical problemsDue to the complicated surface of the hockey stick surface, the design cycle is long and the efficiency is low, which requires high accuracy for three-dimensional data.Co3d solutionsProduct samples → Data acquisition → Data processing CAD system → Model reconstruction → Manufacturing system → New products. Hockey stick 3D scanningHockey stick 3D scanningHockey stick 3D scanningThe company requires three-dimensional scanning of the hockey stick usi...
查看更多>>
Grinder 3D scanning case
Grinder 3D scanning case
来源:
Release Time: 2018 - 11 - 28
Grinder 3D scanning caseHuaguang engineers use hand-held and camera-type 3D scanners to scan grinder and grinder components to obtain accurate 3D data for retrofit design and subsequent quality inspection.Practical problems1. The surface of the grinding machine is convex and has many curved surfaces. The efficiency of using traditional measuring instruments is very low.2. The structure of the grinding machine is complex and has many grooves. The traditional measuring method is slow and cannot obtain accurate three-dimensional data. Co3d solutionsThe grinding machine is a machine tool that grinds the surface of the workpiece with a grinding tool. The surface is more curved and the structure is more complicated. For the problems faced by customers, Huaguang 3D technology engineers use t...
查看更多>>
Automobile foam film mold three-dimensional inspection
Automobile foam film mold three-dimensional inspection
来源:
Release Time: 2018 - 11 - 28
Automobile foam film mold three-dimensional inspectionA well-known mold manufacturer in Xiangtan needs to carry out three-dimensional inspection on the automobile foam film. Huaguang 3D engineers use the 3D photogrammetry system 3DP to detect the automobile foam film, compare and analyze the obtained 3D data with the original 3D data, and see the actual workpiece. Overall deviation from CAD drawings, check the quality of the inspection. Practical problems1. The automobile foam film mold has a large body shape, different surface contours, complicated structure, and many curved surfaces, and the measurement difficulty is large.2. Using the traditional measurement method, only part of the data can be obtained, and the surface and the portion with large slope cannot be measured, resulting...
查看更多>>
Three-dimensional inspection of large composite molds
Three-dimensional inspection of large composite molds
来源:
Release Time: 2018 - 11 - 28
Three-dimensional inspection of large composite moldsA large-scale CNC manufacturing enterprise in Nanjing needs to perform three-dimensional inspection on large-scale composite molds that have been machined to obtain high-precision three-dimensional data. Huaguang engineers use 3D photogrammetric system 3DP to test whether large-scale composite molds are qualified.Practical problems1. Large-scale composite material mold size (about 7 meters long, about 2 meters wide), large size, inconvenient movement, uneven edge contours, more grooves in the water chest surface. Traditional measuring tools (such as gages, secondary elements, three coordinates, etc.) simply cannot perform inspections.2. Due to the large volume of composite molds and the use of traditional 3D scanners, the time is long an...
查看更多>>
Guitar instrument box mold scanning case
Guitar instrument box mold scanning case
来源:
Release Time: 2018 - 11 - 28
Guitar instrument box mold scanning caseA well-known musical instrument manufacturer needs to perform three-dimensional measurement on the guitar instrument box mold, obtain high-precision three-dimensional data, and combine reverse engineering software to design the later guitar mold, accelerate the development of new products, improve production efficiency and save costs.Practical problems1. Since the guitar instrument mold scanning data involves quality inspection and reverse engineering and secondary design, the accuracy of the scanning data is very high.2, the guitar instrument box mold is large and bulky, the inner edge has more curvature, the curvature changes greatly and the vertical slope is more, and the scanning difficulty is increased. The traditional measurement method is very...
查看更多>>
3D inspection of precision and complex machining parts
3D inspection of precision and complex machining parts
来源:
Release Time: 2018 - 11 - 28
3D inspection of precision and complex machining partsA large-scale machining manufacturer in Wuchang needs to carry out three-dimensional inspection on precision and complex machining parts. Because precision and complex machining parts are indispensable important components in mechanical equipment, the quality control is very strict in production. Huaguang engineers use camera type. The 3D scanner HL-3DS+ quickly scans complex and complex workpieces to obtain high-precision 3D data for 3D inspection and comparison analysis to check whether the workpiece production is qualified.Practical problems1. The precise and complicated machining parts are complex and irregular in shape, and the grooves on each surface are different and the corners and shadows are many. The three-dimensional size to...
查看更多>>
Optical instrument precision fittings 3D scanning
Optical instrument precision fittings 3D scanning
来源:
Release Time: 2018 - 11 - 28
Optical instrument precision fittings 3D scanningA well-known domestic enterprise needs to carry out three-dimensional measurement of precision optical components imported from Japan, obtain high-precision three-dimensional data for mold-opening processing, and accelerate the production, efficiency, and efficiency of precision instrument accessories. Practical problems1. The precision parts of optical instruments are irregular in shape and have many holes. The surface texture has many curved contours. The customer needs high requirements for measuring three-dimensional size data and hole position accuracy, which brings great difficulty to traditional measurement work.2, the use of traditional measurement methods, very cumbersome, time-consuming, and it is not easy to accurately and qu...
查看更多>>
Rockery model 3D measurement case
Rockery model 3D measurement case
来源:
Release Time: 2018 - 11 - 28
Rockery model 3D measurement caseThe customer is a well-known enterprise such as 3D architecture and rockery model. The customer needs to scan the rockery, quickly detect the overall surface area of the rockery, and measure the overall size of the rockery. After a number of comparison demonstration customers choose Huaguang, Huaguang's success is more than just The equipment demonstration effect is good, and it is our company's continuous practice and innovative technical solutions as well as high-precision, cost-effective equipment to effectively solve the problems faced by customers, thus saving costs and time for customers. Practical problemsThis caseHuaguang customers: a well-known 3D architecture and rockery model design company in ChinaScanning object: 3D scanning of roc...
查看更多>>
Three dimensional detection of hydraulic disc milling cutter
Three dimensional detection of hydraulic disc milling cutter
来源: network
Release Time: 2016 - 09 - 23
Three dimensional scanning case of hydraulic disc milling cutterHuaguang engineer to scan precision cutter using 3D scanner HL-3DM, a cutter 3D model accurate file (CAD drawings), for the detection and quality control of the retrofit design and follow-up quality.Practical problems1, the shape of the disc milling cutter is complex, the hole position is much, the efficiency of the traditional measuring instrument is very low.2, disc milling cutter is not only smaller size, but also more common, the use of ordinary three-dimensional scanner can not get its accurate 3D data.CO3DsolutionsIs the milling cutter in machining process, a cutting tool milling plane, is called a mile, screw fixed blade position if there is a big error, may directly lead to the workpiece scrapped. Huaguang engineers pr...
查看更多>>
3D scanning of sand core model
3D scanning of sand core model
来源: Original
Release Time: 2016 - 09 - 05
Three dimensional scanning case of sand core modelA well-known domestic sand core mold production enterprises, want quick access to the original data of three-dimensional appearance of sand core mould by 3D scanner, 3D detection in comparison with the original model, get the sand core mold detection and analysis report, check whether the sand core mold data quality, for the production of sand core mold, to accelerate the development and production of new products.Practical problems1 sand core mold with complex shape are smaller in size and more convex surface, multi hole and other features, and not be sprayed to scan the work of great difficulty.2 general methods of measurement (three coordinates, two dimension, caliper etc.), only a small part of the data acquisition of sand core mold, wa...
查看更多>>
Three dimensional measurement and scanning of steam turbine blades
Three dimensional measurement and scanning of steam turbine blades
来源: Original
Release Time: 2016 - 09 - 02
Three dimensional measurement of die for steam turbine bladeThe die surface curvature of the turbine blade is large, the design process is complex, the die precision of the turbine blade directly affects the production of the blade is qualified, the turbine blade mold must be detected and analyzed. Practical problems1 the forging process of turbine blade is complex, the design cycle is long, the design task is heavy, so it is necessary to reduce the design strength and speed up the development of turbine blade.2 turbine blade forging process, the geometric size of large, serious distortion, the need for timely measurement of turbine blade mold.CO3DsolutionsCase profile:A large domestic turbine production enterprises, in order to solve the measurement problem of turbine blade mold, dec...
查看更多>>
Automobile panel die scanning
Automobile panel die scanning
来源: Original
Release Time: 2016 - 09 - 02
Three dimensional inspection of automobile panel dieshe global camera automobile panel die, get the detection part of the three-dimensional coordinates of targets, import photos shoot into the software to calculate, the calculated data with the original analog map and then testing contrast analysis, error of the automobile cover mold joint the value of. The manufacturing process of automobile panel die is more complicated. Good stamping process can not only simplify the stamping process, but also can greatly reduce the capital investment in stamping die manufacture.Practical problems1 car cover a large size (3 meters long, 2 meters wide), the shape of complex, mobile inconvenience. Traditional measurement tools (such as inspection tools, the two dimension, three coordinates, etc.) can...
查看更多>>
Car bumper scan
Car bumper scan
来源: Original
Release Time: 2016 - 09 - 02
Automobile bumper mold inspectionThe 3D data of a famous auto parts production company to get bumper mold bumper to establish 3D model files (CAD drawings), to provide data support for the structural design, automobile bumper mold modification design and subsequent quality inspection.Practical problems1 automobile bumper mold is larger, the production of the product is easy to produce deformation, so the quality control of the rod is very important, and the 3D data of the die is very high precision.2 only use traditional detection methods (such as fixture, jig, three coordinate etc.) is very cumbersome and time-consuming, and is not easy to structure of automobile bumper mold for accurate and rapid measurement, detection. Auto insurance Rod Die scanning spotCO3D  solutionsAiming ...
查看更多>>
深圳市华朗科技有限公司 Tianjin City Economic and Technological Development Zone, Fourth Street 80, Tianda Science & Technology Park South 3 layer Mailbox：co3d@co3d.com Telephone：022-5900-2803 Fax：022-5900-2805 Zip code：300457
  • Two-dimensional code name
    Two-dimensional code name
    Two-dimensional code name
Copyright ©2005 - 2013 Huaguang 3D (Tianjin) Technology Co. Ltd.
Tianjin ICP preparation of 16003447 -1
  Sitemap
犀牛云提供企业云服务
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 4006-971-972
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开
Top