For details on how to use the 3D scanner, please refer to the instruction manual of Huaguang 3D Scanner.

1. Check each power plug carefully before turning it on to avoid data loss during the measurement process.

2. After entering the user state, the system parameters must not be modified at will, and the system files should not be deleted at will.

3. The data line should be straightened before measurement to avoid tripping when the bracket is moved.

4. When handling the bracket and the measuring head, handle it gently to avoid loosening the lens and changing its position.

5. For hardware calibration, use special tools for the tightness of each thread. Do not use excessive force when adjusting.

6. Do not touch the beam and the three lenses with your hands to prevent dust from entering or damaging the beam and lens.

7. When the bracket is raised or lowered, two people should cooperate to prevent the bracket and the measuring head from falling down.

8. When spraying the colorant, be sure to cover the lens with a mirror cover to prevent dust from contaminating the lens.

9. The lens light source should be extinguished in the measurement gap to extend its life.

10. After the measurement is completed, carefully remove the parts and close the lens cover with the mirror cover.

11. Regularly wipe the lens with special paper to ensure cleanness. The LCD monitor should be wiped regularly with soft paper. Do not touch the monitor with sharp objects. Cover it with a clean cloth when not in use.

12. When the system is abnormal, it should be recorded in time, and immediately contact the management department, and must not be handled without authorization.

13. After the work is completed, clean the work site and equipment. Implement civilized work.

14. Record the operation of the equipment at the end of each shift.