Telephone: 022-5900  2803
  • Company news
    • Release Time: 2019 - 06 - 18
      Improving and improving a country's energy structure and completing a country's new energy construction more quickly and efficiently is a major event that many countries are now implementing closely. The development of solar energy, around solar energy applications, humans have thought of many ways. In China, researchers are creating an artificial sun.In the circulating 2M installation, the researcher of the “vacuum chamber” technology of the Southwest Institute of Physics of the Nuclear Group Nuclear Industry, Yu Hong is the chief designer of the most important equipment “vacuum chamber” of the circulating 2M installation. A vacuum chamber inside a car tire liner is like a space capsule. This is where the nuclear fusion reaction takes place. In the future, it will reach an ultra-h...
    • Release Time: 2016 - 07 - 22
      With the development of science and technology and industrial production, more and more fields have put forward the requirement of 3D measurement of workpiece size and shape parameters. Currently on the market has successfully developed three-dimensional scanner measurement instruments, such as three-dimensional scanner in the measurement range, measurement accuracy and measurement speed and other aspects than the traditional measuring instruments. Domestic industrial products to be exported to foreign countries, the need for three-dimensional detection of comparative analysis of the report, the current industrial exports are basically the use of three-dimensional scanner to do testing.Impeller three-dimensional detection schemeThree dimensional detection schemeThe export of industrial pla...
    • Release Time: 2016 - 09 - 03
      Huaguang 3D -3DP 3D photogrammetry system is based on the high resolution of a hand-held digital camera (4288 x 2848), the object to be measured by shooting digital photos, 2D digital photo image superposition, to obtain the 3D coordinate of the measured object, and the mobile technology to capturing 3D coordinates, quality control the analyte (Inspection) and variant analysis (Deformation) can effectively save time. Prior to the beginning of the measurement, the first object is attached to the code point, and then use the camera to shoot. During the shoot, take many different angle images, these images will be read to Huaguang 3D 3DP software, because each image of the shooting angle, each image from different angles, through triangulation, Huaguang 3D 3DP software will automatically comb...
    • Release Time: 2016 - 08 - 18
      "Using the latest remote sensing technology to achieve full coverage, closely monitoring the movements of geological disasters". Recently, the international famous journals published the results of the study of the China University of Geosciences - "integrated multi remote sensing technology to monitor the overall structure of the landslide and the latest progress", has aroused widespread concern in the international.According to reports, China is a geological disaster occurred frequently and the disaster loss is very serious, landslide, collapse, debris flow disaster almost throughout the provinces in mountainous and hilly areas, the activity area of about 45% of the total land area. The key of the management and prediction of geological disaster is to carry on the lon...
  • Industry news
    • Release Time: 2021 - 09 - 25
      Human body 3D scanner, also called 3D body scanner, uses optical measurement technology, computer technology, image processing technology, digital signal processing technology, etc. to perform non-contact automatic measurement of the contour of the 3D human body surface. Use optical three-dimensional scanning to quickly scan the whole body or half of the body in multiple angles and directions, and then realize automatic splicing through computer software to obtain accurate and complete human point cloud data and achieve stronger functions.The famous Polish female singer is cooperating with Fanadise, the world's first content creator NFT platform, to launch an NFT project. The body is divided into 406 parts and auctioned out by 3D scanning, including conventional parts such as arms, leg...
    • Release Time: 2021 - 09 - 13
      Recently, with the cooperation of Hudong Shipyard and Baosteel and other companies, China has successfully developed Invar, which is as thin as an eggshell, and successfully broke the 50-year technological monopoly of Europe and the United States. The manufacturing of this steel is even more difficult than building an aircraft carrier. What is the main purpose of this material? How to achieve localization?Invar is a metal that is widely used in the industrial field. It will not deform and has a very low expansion coefficient. It is often used in the construction of civil ships. The most common one is the LNG ship that transports liquefied natural gas, because it can maintain low temperature in the ultra-low temperature environment. It is most suitable for deforming and manufacturing equipm...
    • Release Time: 2021 - 08 - 30
      The strongest in the field of aeroengines must be military aviation engines. Based on the engines of civil airliners, they pursue greater thrust and maximum thrust during overtime. Therefore, military engines can be regarded as the pinnacle of human technology.Countries that are capable of R&D, manufacturing, and production of aero-engines generally do not easily export their own technologies. They only export finished engine products, and some even need to be sent back to the country of origin for maintenance.Up to now, aero engines have to rely on manual and skilled assembly.The dense pipelines on the turbofan engine of the NK-25 engine of Figure-22M3. For a long time, this engine and the NK-32 are the most powerful aero engines in the world.The fuel injection ring of the afterburner...
    • Release Time: 2021 - 06 - 10
      Digital revolutions such as augmented reality (AR)/virtual reality (VR), autonomous driving, ultra-high frame rate shooting, and automated robots have opened up infinite possibilities for people's lives. One of the key devices that enable all of this is the 'image sensor', which is a device that converts light signals into electrical signals.The SPAD image sensor is a special image sensor. The term 'image sensor' immediately reminds people of CMOS image sensors in digital cameras, but SPAD sensors work differently.Both SPAD and CMOS image sensors take advantage of the fact that light is composed of light particles. However, each pixel of the CMOS image sensor measures the amount of light that reaches the pixel within a given time, while the SPAD image sensor measures ea...
    • Release Time: 2021 - 05 - 21
      According to media reports, the University of Michigan has developed a new real-time 3D motion tracking system that can replace imaging system technologies such as lidar and cameras in autonomous driving applications.This technology combines transparent light detectors with advanced neural networks and is expected to be used in the fields of automated manufacturing, biomedical imaging and autonomous driving. Zhaohui Zhong, an associate professor of electronic and computer engineering at the University of Michigan, and his team have developed a transparent, nanoscale, and highly sensitive graphene photodetector. The imaging system takes advantage of this detector. Since graphene is very sensitive to light, it is enough to produce images that can be reconstructed by computational imaging. Th...
  • Exhibition
    • Release Time: 2024 - 05 - 18
      Lijia International Intelligent Equipment Exhibition, founded in 2000, is one of the largest intelligent manufacturing equipment exhibitions in China. It will be held from May 13th to 16th, 2024 at the Chongqing International Expo Center. Hualang 3D will carry high-precision 3D scanners and automated 3D measurement systems with a heavy weight.The 24th Lijia International Equipment Exhibition in 2024 focuses on cutting-edge manufacturing technologies and showcases the new achievements made in the equipment manufacturing industry in recent years. On the first day of the event, group audiences appeared one after another, and various enterprises gathered everywhere to catch the eye. The avant-garde audience was overwhelmed.The Hualang 3D high-precision 3D scanner attracted a large number of vi...
    • Release Time: 2024 - 05 - 13
      The highly anticipated "2024 10th TCT Asia Exhibition" will be grandly held for three consecutive days (May 7-9) at the National Convention and Exhibition Center (Shanghai) Halls 7.1&8.1. The scale of the exhibition is unprecedented! The total exhibition area reaches 40000 square meters, from 80 exhibitors who first landed in Shanghai in 2015 to a historic increase of 400 exhibitors in 2024. On the first day of the opening ceremony, the number of viewers broke the record for the first day of previous editions!We have also brought more new equipment and technologies to this exhibition. Hualang 3D technicians conducted on-site demonstrations, attracting numerous visitors to inquire and exchanging ideas with on-site staff on the widespread application of Hualang 3D products and ...
    • Release Time: 2024 - 05 - 13
      The 20th Tianjin Industrial Expo, which lasted for 4 days from April 6th to March 9th, 2023, came to a successful conclusion. Hualang 3D made another perfect debut, and this exhibition also brought more new equipment and technologies. We demonstrated to customers at the exhibition site and achieved good feedback, providing new solutions in measurement, reverse engineering, and other application directions!This year's Industrial Expo has 8 exhibition areas, including CNC machine tools, robots, industrial automation, welding and laser processing, new energy equipment, and automotive equipment, with an exhibition area of nearly 100000 square meters. It has attracted nearly 1000 well-known brands from more than 10 countries and regions in the industry to participate in exhibitions and exch...
    • Release Time: 2024 - 05 - 13
      The Western Expo is based in Shaanxi and radiates the vast market in the western region. It is an important node and bridge between the domestic and foreign industrial chains and the western market of China, and has created a "golden signboard" in industrial equipment exhibitions in the western region. In recent years, each expo has attracted nearly a thousand well-known domestic and foreign enterprises to participate. The theme of this expo is "Implementing the 'Dual Circulation' Strategy and Promoting Industrial Integration and Development". The overall exhibition area is over 40000 square meters, with a focus on showcasing the latest technologies, core products, and application solutions in the field of intelligent manufacturing at home and abroad.Hualang 3D ...
    • Release Time: 2024 - 05 - 13
      The 2024 ITES Shenzhen Industrial Exhibition will be held from March 28th to 31st at the Shenzhen International Convention and Exhibition Center (Bao'an). In the magnificent exhibition area covering an area of 300000 square meters, over 3000 excellent enterprises have gathered, bringing numerous cutting-edge technologies and innovative products to the stage. Hualang 3D, as a leading enterprise in the field of industrial measurement, will also attend this grand event. Focusing on two core industries: high-end equipment industry cluster and advanced manufacturing technology industry cluster, covering metal cutting machine tool exhibition, metal forming machine tool exhibition, industrial parts exhibition, robot and automation equipment exhibition, electronic intelligent manufacturing exh...
  • Handheld 3D scanner
    • Release Time: 2019 - 11 - 02
      Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, Huaguang handheld 3D laser scanner technology leading, this product has been widely used in reverse engineering and 3D inspection. The product adopts new hand-held design, light weight (0.83kg), easy to carry; ready to use; high work efficiency, flexible scanning scheme can be customized according to user needs, can cooperate with our 3D photogrammetry system when scanning large workpieces ( HL-3DP) eliminates accumulated errors and improves the global scanning accuracy of large workpieces. With 14 laser lines + extra 1 scan deep hole+ 7 additional scan details, dual industrial camera, automatic dot stitching technology combined with scanning software, support photogrammetry and self-calibration technology. It is suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. The operation process is flexible and convenient, and it is suitable...
    • Release Time: 2021 - 09 - 29
      Product technology introductionThe domestic manufacturer of handheld laser scanner independently developed by Huaguang is specialized in handheld 3D laser scanner technology. This product has been widely used in the field of reverse engineering and 3D detection. The product adopts new handheld design, light weight and easy to carry; Ready to use; With high work efficiency, the scanning scheme can be flexibly formulated according to user requirements. When scanning large workpieces, it can cooperate with our three-dimensional Photogrammetry System (hl-3dp) to eliminate accumulated errors and improve the global scanning accuracy of large workpieces. It adopts 22 laser lines + 1 scanning deep hole + 7 scanning details, dual industrial cameras, automatic splicing technology of marker points and scanning software to support photogrammetry and self calibration technology. It is suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. the operation process is fle...
    • Release Time: 2018 - 11 - 23
      Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, the shape of mobile handheld 3D laser scanner technology, has been widely used in reverse engineering and 3D inspection. The product uses a new hand-held design, light weight , easy to carry; ready to use; high work efficiency, flexible scanning solution according to user needs, can cooperate with our 3D photogrammetry system when scanning large workpieces (HL -3DP) Eliminates accumulated errors and improves global scanning accuracy of large workpieces. Using 26+14+1laser lines, dual industrial cameras, automatic point stitching technology and scanning software, support photogrammetry and self-calibration technology. It is especially suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. The operation process is flexible and convenient, and it is suitable for various complicated application scenarios.HOLON D71 Technical Features1. Lig...
    • Release Time: 2021 - 12 - 28
      Product technology introductionThe domestic independent research and development of handheld laser scanner manufacturers, the shape of mobile handheld 3D laser scanner technology, has been widely used in reverse engineering and 3D inspection. The product uses a new hand-held design, light weight , easy to carry; ready to use; high work efficiency, flexible scanning solution according to user needs, can cooperate with our 3D photogrammetry system when scanning large workpieces (HL -3DP) Eliminates accumulated errors and improves global scanning accuracy of large workpieces. Using 26+22+1laser lines, dual industrial cameras, automatic point stitching technology and scanning software, support photogrammetry and self-calibration technology. It is especially suitable for on-site 3D scanning, field 3D scanning, large workpiece 3D scanning, etc. The operation process is flexible and convenient, and it is suitable for various complicated application scenarios.HOLON DB1 Technical Features1. Lig...
    • Release Time: 2023 - 08 - 26
      Product technology introductionHandheld design, easy to carry, and ready to use; Industrial grade large-scale 3D scanning system with high work efficiency. Blue laser light source, 34 crossed blue laser lines+22 parallel blue laser lines+1 deep hole scanning laser line, dual industrial cameras, automatic marking point splicing technology combined with scanning software, supporting photogrammetry and self calibration technology. Flexible scanning plans can be developed according to user needs.Product modelGalaxy 57Light source57 blue laser lines (wavelength: 450nm)Measuring speed3,350,000points/sScan modeStandard modeDeep hole modePrecision mode34 crossed blue laser lines1 blue laser line22 crossed blue laser linesData accuracy0.02mm0.02mm0.01mmScanning distance450mm450mm450mmScan depth of field550mm550mm200mmResolving power0.01mm(max)Scanning area800×600mmScanning range0.1-10M(expandable)Volumetric accuracy0.02+0.03mm/m0.02+0.015mm/m  combined with hl-3dp 3D global Photogramm...
  • Camera 3D scanner
    • Release Time: 2016 - 09 - 14
      Product technology introductionHuaguang Photographic 3D Scanner has a number of patented technologies, adopting new coding calibration technology (leading technology, synchronizing advanced gom advanced technology), which is the core of 3D photogrammetry technology and application, reducing physical distortion and improving the original 3D data scanning accuracy. The heterodyne multi-frequency phase shift grating technique is used to improve the quality of the scanning point cloud. Synchronized with the German gom company, it has a Blu-ray device scanning system, and the camera-type 3D scanner scans data points up to 0.01mm, which is suitable for fine workpiece scanning. The new core design concept uses carbon fiber materials to improve the stability of the product during operation. Α7000 technical features1, super high efficiency: a car scan ≤ 2 hours2, cost-effective: no photogrammetry cooperation, can complete large-scale measurement3, high stability: the use of carbon fiber pa...
    • Release Time: 2016 - 07 - 27
      Product technology introductionCO3D camera-type 3D scanner has a number of patented technologies, using a new code calibration technology, which is the core of 3D photogrammetry technology, and reduces the physical distortion to improve the original 3D data scanning accuracy. The heterodyne multi-frequency phase shift grating technique is used to improve the quality of the scanning point cloud. Synchronized with German gom company, it has a Blu-ray device scanning system, and the camera-type 3D scanner scans data points up to 0.01mm, which is suitable for fine workpiece scanning. It adopts international new core design concept and applies carbon fiber materials to improve product stability. Sex. 3D scanner HL-3DS technical features:1.13 step code calibration technology: eliminate lens distortion error and improve scanning accuracy2. Heterodyne multi-frequency phase shift grating: uniform fringe projection, point cloud data accuracy, no noise data3. Portable design: the hardware sy...
    • Release Time: 2016 - 07 - 25
      Introduction to product technologyShape moving picture type 3 d scanner has a number of patented technology, using the latest international code calibration technology (leading domestic, the synchronization of the international advanced technology, the technology is the core of the technology of three-dimensional photogrammetry mastery and application of reducing physical distortion the original 3 d scanning data precision is improved. In this paper, the technology of multi-frequency phase shift with heterodyne method is used to improve the quality of scanning point cloud. In sync with gom in Germany, the scanning system of blue light device is true, and the scanning data point of 3d scanner can reach 0.01 mm, which is suitable for fine workpiece scanning. Adopt the new international core design concept, apply carbon fiber material, improve the stability of the product work.  Features of 3d scanner hl-3dm technology: 1. High-precision motherboard data: using German ...
    • Release Time: 2016 - 07 - 27
      Product technology introduction:The shape-moving photo-type 3D scanner has a number of patented technologies and adopts a new code calibration technology. This technology is the core of the 3D photogrammetry technology and its application. The reduction of physical distortion improves the accuracy of the original 3D data scanning. The heterodyne multi-frequency phase shift grating technique is used to improve the quality of the scanning point cloud. Synchronized with the German gom company, it has a Blu-ray device scanning system, and the camera-type 3D scanner scans data points up to 0.01mm, which is suitable for fine workpiece scanning. The new core design concept uses carbon fiber materials to improve the stability of the product during operation. Industrial grade 3D scanner HL-3DX technical features:1, the product has a long service life, up to 35,000 hours2, hardware stability, system size is small (360 × 120 × 120mm), easy to disassemble, easy to bring to the measu...
    • Release Time: 2016 - 09 - 14
      Product technology introduction: Shape moving picture type 3 d scanner has a number of patented technology, using the latest international code calibration technology (technique of synchronous leading domestic, international advanced), the technology is the core of the technology of three-dimensional photogrammetry mastery and application of reducing physical distortion the original 3 d scanning data precision is improved. In this paper, the technology of multi-frequency phase shift with heterodyne method is used to improve the quality of scanning point cloud. In sync with gom in Germany, the scanning system of blue light device is true, and the scanning data point of 3d scanner can reach 0.01 mm, which is suitable for fine workpiece scanning. Adopt the new international core design concept, apply carbon fiber material, improve the stability of the product work. Industrial grade 3d scanner hl-3dx + technical features: 1. Long service life, up to 35,000 hours 2. Hard...
  • Three dimensional Photogrammetry System
    • Release Time: 2016 - 07 - 27
      Introduction to product technology  Shape moving picture type 3 d scanner has a number of patented technology, using the latest international code calibration technology (technique of synchronous leading domestic, international advanced), the technology is the core of the technology of three-dimensional photogrammetry mastery and application of reducing physical distortion the original 3 d scanning data precision is improved. In this paper, the technology of multi-frequency phase shift with heterodyne method is used to improve the quality of scanning point cloud. In sync with gom in Germany, the scanning system of blue light device is true, and the scanning data point of 3d scanner can reach 0.01 mm, which is suitable for fine workpiece scanning. Adopt the new international core design concept, apply carbon fiber material, improve the stability of the product work. Product features 1. Aviation special anti-pressure instrument box, anti-collision design protection. &...
  • 3D online inspection system
    • Release Time: 2018 - 12 - 10
      Huaguang HL-Scan three-dimensional scanning system can quickly complete three-dimensional detection and reverse engineering application of various size workpieces. It can automatically locate target points without arm or other tracking equipment. It can scan a cross laser beam plus an additional laser beam with a scanning speed of 1340,000 measurements/seconds. It is a plug-and-play system, which can be installed and used quickly without layering point clouds. Automatically generate three-dimensional solid graphics (triangular mesh surface); hand-held arbitrary scanning, portable operation, wide scope of application, scanning in narrow space, no requirements for the working environment.Real-time interaction between multi-function keys and software17.6m³ super large workspace, expandable (dynamic coordinate system can be established)Ignore complex factors such as workshop vibrationNo fixed installation, easy operationIf you don't stick to the point, you can take it and sweep it...
    • Release Time: 2018 - 11 - 24
      Product technology introductionWith the rapid development of the field of 3D scanning, our company has accumulated nearly 20 years of technology to launch an automated 3D online inspection system. Through the installation of equipment directly on the production line, 3D software measurement technology is used for real-time detection and data feedback, so that the product can better produce guidance. Work, reduce unnecessary losses, save time and production costs, greatly improve production efficiency.HOLON760 Technical Features1. Operational performance safety: man-machine cooperation robot, no need for guardrail, easy to operate.     2. Fully automatic scanning: The whole process from 3D scanning to generating test report can be completed with one click.     3. High data accuracy: accuracy up to 0.015mm, strong resistance to environmental interference.     4. Blu-ray scanning technology: The three-dimensional online detection system adopts ...
  • Big scene 3D scanner
    • Release Time: 2016 - 08 - 22
      Product Features | Product features.1.Anti-collisionIn high-value equipment such as port machinery / crane / special equipment / conveyor equipment and other fields.For high-value equipment, impacts often result in huge economic and personnel losses.Conventional single-point detection equipment such as photoelectric (including single-point laser), ultrasonic and other anti-collision schemes can only detect in the linear direction, and there are detection blind spots for irregular obstacles and corners.Laser scanning products enable surface inspection and scan areas in the direction of travel of the device for more reliable protection.2. DetectionIn the scanning range, different shapes of detection areas can be set, and when an object enters the area, a signal can be output through the I/O port.3. SecurityThe area can be protected by scanning the area. Laser scanning eliminates the need for additional light sources, is unaffected by ambient light, and is highly reliable.It can accuratel...
  • Color 3D scanner
    • Release Time: 2016 - 07 - 27
      Product technology introductionThe HL-3DC color 3D scanner uses advanced image texture analysis and acquisition technology to maintain true color display of the surface of the object while performing 3D data reconstruction. This technology completely preserves the true color of the measured object, and is very suitable for digital cultural relics, ancient building surveys, computer synthesis, games, virtual three-dimensional environment, three-dimensional digital product demonstration, archaeological and other occasions with high texture and color requirements. The 24-bit color point cloud data closely combines the object's three-dimensional data information with the surface texture information to maximize the true physical characteristics of the object.  Product numberHL-3DCSensor: resolution (pixels)1,300,000x3 (optional 2 million, 3 million, 5 million pixels)Single measurement accuracy (mm)≤±0.01mmSingle measurement time (S)≤3SMeasuring point distance (mm)0.07~0.4...
  • Anthropometer
  • Desktop level 3D scanner
  • Video Center
  • Calibration plate, target rod and work frame
    • Release Time: 2019 - 05 - 16
      Product characteristicsMachine vision calibration pattern guarantees measurement accuracy and photolithography technology ensures clear, complete, sharp edges and good recognition. It has the function of automatic corner detection without complicated corner process, obvious contrast between black and white pattern quality, special instrument, target cell grid-by-grid calibration, covering corner-by-grid calibration technology.Machine vision calibration chartMaterial: Marble, ceramics, glass, metal and other imported materials can be selected, with high accuracy, high stability and other characteristics, all sizes can be customized.Use: Supports software devices marked by solid dots or squares. In the process of high precision camera calibration, the feature points are used as reference points, and the center position is accurately extracted by graph fitting.Product displayAs a manufacturer of three-dimensional scanner, Huaguang three-dimensional scanner consumables codin...
    • Release Time: 2016 - 08 - 15
      Special instrument box, special aviation box material, the box according to the size of the equipment, weight and shock absorption and other conditions designed. The external box by multi-layer plywood hard with ABS fireproof plate nail into the bearing capacity and wear resistance, the strong instrument box; with the amount of light, insulation, shockproof, moisture-proof, anti burning, oxidation resistance, sealing function, convenient advantages apparent advantages, body appearance, safe and reliable, easy to maneuver excellent sealing, strong, strong etc..
    • Release Time: 2016 - 08 - 15
      A 3D scanner frame: camera type3dscanner tripod stand a professional level, is a company specializing in the design, not only for our Huaguang 3D scanner, but also for the other design features of 3D scanner and a tripod is a work frame with high stability and high strength.A work frame is made of high quality alloy build, with high-end technology, smooth rotation, soft, stable and reliable locking using 3D tripod design, surface through special treatment, use for a long time does not fade.
    • Release Time: 2016 - 07 - 27
      The three foot 3D Huaguang high hardness platform, non slip surface water caltrop shaped stripes, hard friction resistance, provide stable support for any small object scanning. It can provide a good scanning state for 3D scanner, and can not shake or shake when working. The tripod frame features: high strength, corrosion resistance, strong stability and lightweight tripod. The movable is good, the lifting is convenient, the scanning angle is easy to be adjusted, the light is light, and is convenient to carry.1, the shape is small, light and strong, easy to carry, folding height is only 35CM.2, three-dimensional tripod joint thread is an international dimension, not only for our 3D scanner, and suitable for traditional camera 3D scanner and camera 3D scanner uses a small.3, applicable to the company, household scanning, easy to operate, travel can be carried.4, distribution portable bag, go out to carry more convenient.
    • Release Time: 2016 - 08 - 15
      Multi angle three-dimensional scanning turntable:1 workpiece can be fixed on the turntable, the realization of 360 degrees x 360 degree full scan;2 you can use the HL-3DP 3D photogrammetry system, to accurately calibrate the marks on the table, calculate the precise coordinates of the mark points, and realize the high precision 3D data mosaic;3 each time can read the signs on the turntable ID information, save the time of the paste mark point, and mark point ID data can be used repeatedly, and then improve the efficiency of scanning
  • Automobile traffic
    • Release Time: 2024 - 01 - 11
      Tricycles are commonly used lightweight transportation tools in today's society, which can play a significant role in carrying people and transporting goods. The safety of a tricycle relies entirely on its frame, and as an important component of an electric tricycle, quality control becomes of utmost importance.Practical problemsThe customer requires a 3D scanner to scan high-precision complete data with high efficiency, detect actual machining errors, and ensure safe driving in the later stage. The three wheeled frame is an alloy tube frame structure with a large curvature, making it difficult to use traditional measurement methods and unable to quickly and accurately obtain the three-dimensional model data of the electric vehicle frame.Co3d solutionUsing 14 laser lines+7 fine modes+1...
    • Release Time: 2023 - 11 - 27
      As the 'heart' of new energy vehicles, battery technology plays a crucial role in their normal operation and is also a key link in the upgrading and breakthrough of the new energy industry chain. The customer needs to check if the battery installation is in place.Physical picture of car battery packPractical problems  The battery pack is a precision workpiece with a complex and uneven surface, a complex structure, and wire connections on the side. Customers have high requirements for data accuracy, and traditional measurement techniques are difficult to obtain high-precision data, which cannot meet the measurement results that customers need.Scanning image of battery pack on siteCo3d solution  For complex surface features, Hualang engineers use a handheld 3D scanner HOLON...
    • Release Time: 2023 - 11 - 21
      Cars are one of the important products of modern society. With the popularization of automobiles, their utility has become increasingly prominent. With the increase in demand and the increasing development space, a certain car manufacturer needs to conduct a three-dimensional scan of the overall appearance of the car.Car scanning scene mapPractical problems  The car has a large volume, irregular surface, and many curves. Customers have requirements for scanning speed. Traditional detection methods are slow to manually measure, and the data is not accurate. Many parts cannot be effectively measured, leading to secondary errors.Car scanning scene mapCo3d solution  In response to the problems faced, Hualang engineers use a handheld 3D scanner 'HOLON B71' to comprehensively s...
    • Release Time: 2023 - 10 - 18
      The automotive industry in China has developed rapidly in recent years and will continue to steadily develop in the future. As an important component of automobiles, car seats have a large demand for seats, so there is still huge development space for the passenger car seat industry in the future. A well-known manufacturer needs to perform a 3D scan of the seats.Product physical imagePractical problems    Product quality inspection requires high measurement accuracy. The workpiece has a black and dark surface, and the overall contour is complex, with many curved surfaces and included angles. Traditional measurement methods cannot accurately and comprehensively measure surface 3D data, and there is a lack of effective measurement solutions for complex contours and narrow dead corn...
    • Release Time: 2023 - 09 - 05
      Forklifts play a very important role in the logistics system of enterprises and are the main force in material handling equipment. Widely used in various departments of the national economy such as stations, ports, airports, factories, warehouses, etc. Therefore, in the past few years, the demand for forklifts in China has been growing at a double-digit rate every year.Practical problems1. The customer needs to conduct a three-dimensional inspection of the rear hood of the forklift and measure the dimensions of the installation holes. High data accuracy2. The workpiece is 2.5 meters wide, weighs 15 tons, has a large volume, and has an irregular surface with many curved surfaces and hole positions3. Traditional detection methods are slow to manually measure, with inaccurate data, and many p...
  • Aerospace
    • Release Time: 2023 - 02 - 22
      During the long-term high altitude flight of the aircraft, the high intensity air pressure on the shell surface and the objects in the air are prone to produce large range of depressions due to friction and collision. In order to ensure the stability of the cabin air pressure, it is necessary to repair the depressions of the aircraft shell, so as to ensure the safety of the aircraft during flight and achieve the purpose of extending the working time cycle of the aircraft.Physical drawing of aircraft sitePractical problemsAfter the aircraft was split, in order to quickly achieve the purpose of surface detection, the manufacturer decided to use the Hualang 3D handheld 3D laser scanner HOLON B71 to detect the shell depressionHigh-precision 3D detection process:       ·...
    • Release Time: 2022 - 11 - 22
      Three dimensional scanning of aircraft impeller        Impeller is the core part of aeroengine, and its overall contour is three-dimensional free surface. In the detection of similar parts of impeller, high-precision detection is the first problem in the whole detection link. In the process of repeated detection and practice, a mature and perfect detection scheme has gradually formed.飞机引擎叶轮实物图面临的问题| Practical problems      The inspection of aircraft impeller usually requires full size inspection. There are many items to be inspected. The efficiency of traditional single point inspection is too slow to be applied to the heavy work of multi part inspection. The free surface distortion is serious, and the 3D data of the equipment cannot be stable during meas...
    • Release Time: 2022 - 05 - 20
      Three dimensional inspection of aircraft inner panelAir travel has increasingly become one of the important means of transportation, and passengers' riding experience has been paid more and more attention. The sound insulation inside the cabin has become one of the main problems, and the air tightness of the covering parts in the aircraft is a direct factor.Pracical problems1. In order to improve the coincidence degree of aircraft panel assembly, obtain the three-dimensional data of the processed inner panel.2. Using traditional measuring tools to obtain the special surface data of aircraft inner panel is incomplete, which can not meet the needs of customers.飞机内覆盖件对现场扫描图SolutionsUse the CO3D  handheld 3D scanner Holon B71 and 30 crossed blue laser lines to obtain 3D data quickly a...
    • Release Time: 2022 - 04 - 22
      Three dimensional inspection of engine bladesThe blade is a key part of aero-engine, and its manufacturing volume accounts for about one-third of the total machine manufacturing volume. Aero-engine blades are thin-walled and easily deformed parts. How to control its deformation and process it efficiently and with high quality is one of the important research topics in the blade manufacturing industry.Practical problems1. Use a hand-held 3D scanner to inspect the engine blades, compare the acquired 3D data with the standard parts, the accuracy is 0.02mm, and process the unqualified parts.2. Using traditional measurement methods (checking jig, jig, three-coordinate, etc.), the acquired data is incomplete, and the curved surface cannot be measured, resulting in an incomplete amount of acquire...
    • Release Time: 2022 - 03 - 12
      Three dimensional inspection of aircraft exhaust hoodAs the core power component of aircraft, the exhaust hood of aircraft engine plays an important role. At the same time, it can protect the engine and surrounding pipeline accessories, including engine, circuit, oil circuit, braking system and transmission system, so as to fully protect the normal operation of the aircraft.Practical problems1. The aircraft exhaust hood is made of titanium alloy. Several typical failure forms of titanium alloy may occur in aviation engineering applications, including fretting wear, fretting fatigue, hot salt stress corrosion, hydrogen embrittlement, embrittlement of low melting point metal and contact corrosion.2. The air intake hood of aircraft engine has the characteristics of different groove shapes and...
  • Heavy equipment manufacturing
    • Release Time: 2023 - 11 - 25
      A compressor is a driven fluid machinery that elevates low-pressure gas to high-pressure gas and is the heart of a refrigeration system. It sucks in low-temperature and low-pressure refrigerant gas from the suction pipe, drives the piston to compress it through the operation of the motor, and then discharges high-temperature and high-pressure refrigerant gas to the exhaust pipe, providing power for the refrigeration cycle. A certain compressor manufacturer needs to perform 3D scanning of compressor components.Physical image of compressorPhysical drawing of compressor componentsPractical problems  The workpiece has a large volume and weight, and there are many uneven details on the surface. The difficulty of collecting part detail data greatly increases, and customers have high require...
    • Release Time: 2023 - 10 - 24
      The hearth is a structural area of a blast furnace, generally referring to the furnace body between the centerline of the first row of tuyeres and the furnace bottom. During the smelting process of the blast furnace, molten iron flows into the front furnace through the hearth and bridge.On site drawing of the inner wall of a large furnace hearthPractical problems      The inner wall of the furnace hearth is arc-shaped and has a large area. The on-site environment is relatively complex, and traditional measurement methods cannot perform complete scanning and splicing. The customer requires high precision in size detection of key parts in order to obtain accurate error values for key parts.On site scanning image of the inner wall of a large furnace hearthCo3d solution...
    • Release Time: 2023 - 10 - 14
      A diesel engine is a type of internal combustion engine that primarily utilizes the combustion of diesel fuel to generate energy. It has the characteristics of high efficiency, high power, and durability, and plays an important role in industries, transportation, and agriculture. With the advancement of technology, the performance of diesel engines will further improve. A well-known manufacturer uses a 3D scanner to perform 3D scanning and reverse modeling.Practical problems    The internal structure of the workpiece is complex and variable, with a large volume and a large measurement workload. The measurement speed needs to meet customer requirements, and there are many surface holes, which greatly increases the difficulty of collecting detailed data of the partsCo3d solution...
    • Release Time: 2023 - 09 - 11
      The coal mining machine is a large and complex system that integrates mechanical, electrical, and hydraulic systems. The working environment is harsh, and if there is a malfunction, it will cause the entire coal mining work to be interrupted, causing huge economic losses. In order to ensure the later usage cycle, customers need to scan the coal mining machine components, and the scanned data is subjected to three-dimensional testing. Practical problemsThe structure of the workpiece is complex, the direction of the surface is variable, and the difficulty of collecting detailed data of the parts greatly increases. Customers demand high scanning accuracy and complete data.     Traditional measurement methods are time-consuming and labor-intensive, and the collected data is...
    • Release Time: 2023 - 08 - 29
      Petroleum pipes are seamless steel pipes suitable for furnace pipes, heat exchangers, and pipelines in petroleum refineries. The customer needs to conduct failure analysis on the ruptured oil pipe, simulate and reproduce the failure phenomenon through analysis and verification based on the failure mode and phenomenon, identify the cause of the failure, and explore the process of failure mechanism.Practical problemsThe oil pipe has a large volume and a curved surface. The customer needs to measure the thickness of the ruptured part of the oil pipe and the thickness related to itself, and the accuracy of data collection needs to be high. And the scanning time is required to be short, and the obtained data can be accurately detected and analyzed. The current detection methods are time-consumi...
  • New energy
    • Release Time: 2023 - 07 - 14
      A centrifugal fan relies on input mechanical energy to accelerate gas through a high-speed rotating impeller. A centrifugal fan is composed of a casing, main shaft, impeller, bearing transmission mechanism, and motor. The speed of the fan can not only cancel throttling losses, but also ensure that the fan always operates in an efficient area, thus greatly saving electricity. This reflects the new trend of current industrial production.Product physical imagePractical problems    The customer hopes to obtain 3D data of the casing and impeller, establish a comprehensive 3D mathematical model, and use it for product construction design, modification design, and subsequent quality inspection.    1. The surface of the casing appears dark black and uneven, with many curved sur...
    • Release Time: 2023 - 03 - 11
      Water turbine bucket defect detection     Most of the impulse turbines that have been operated for many years have cracks in their buckets, and some will also have bucket dropping, which has seriously affected the safety and economic operation of the hydropower station. However, most of the bucket repairs are conducted on site, the treatment process is rough, and the quality is not guaranteed, which brings hidden dangers to the operation of the unit after maintenance.     The personnel of the project team decided to use the hand-held 3D scanner to carry out all-round defect detection on the hydraulic turbine bucket Physical drawing of water turbine bucket Physical drawing of water turbine bucketPractical problem     Fine cracks on the ...
    • Release Time: 2023 - 03 - 10
      The turbine volute is one of the commonly used equipment in hydropower plants at present. The huge energy generated by the drop of high water level makes the volute undergo regular maintenance. There are many disadvantages in the previous maintenance. In order to further save the maintenance time and cost, the manufacturer decided to use the Hualang handheld 3D scanner for inspection:Physical drawing of turbine volute Structural drawing of turbine volutePractical problems       The internal space of the volute is narrow, which has a great limit on the detection space       The overhaul area is large, and all scanning work needs to be completed within the time limit of the manufacturer       The surface of spiral case is rusty...
    • Release Time: 2021 - 12 - 10
      3D Scanning of LeafThe surface of the blade workpiece is a complex curved surface. In the quality inspection, due to the influence of the shape and structure of the workpiece, the traditional industrial inspection method is used to directly detect the workpiece, which can no longer meet the increasing demand of industrial inspection. The types of data that can be inspected are limited, and it is impossible to accurately and quickly determine whether the data is It meets the design requirements, and the detection process takes a long time.Practical problemObtain the point cloud data of the workpiece through three-dimensional scanning, establish a high-precision three-dimensional model, and directly compare the three-dimensional model with the original design model, which can quickly and acc...
    • Release Time: 2020 - 09 - 09
      Three-dimensional inspection of wind bladesThe design of the blades in a wind turbine can directly affect the efficiency of wind energy conversion. Good design, reliable quality and superior performance are the decisive factors to ensure the normal and stable operation of the unit. It directly affects its annual power generation and is an important part of wind energy utilization. 3D scanning technology is used to quickly obtain 3D data of the inspection position of the blade, and through data analysis and comparison, we can understand the existence of the problem and make timely maintenance to ensure the operation of the work.Site scanPractical problemsThe customer needs to check the size of the outer ring of the blade root to check the amount of deformation. And it requires high precisio...
  • Ship engineering
    • Release Time: 2024 - 05 - 17
      With the rapid advancement of technology, there are more and more means of transportation, and ships are one of the important means of transportation, so every component of ship construction is of utmost importance. In ships, there are usually four pistons, and the piston is one of the important components composed of a cast iron skirt and a heat-resistant steel head, which are tightly connected to the piston rod through bolts. The grooves and locating pins on the piston head ensure precise positioning between the components.Physical picture of ship piston on sitePractical problemsThe piston has an irregular cylindrical shape and a surface with ring grooves, which are prominent and uneven. There are holes on all three sides, and the holes on the side are connected, which can easily lead to...
    • Release Time: 2024 - 05 - 10
      The engine is the source of power for ships, and it can also act as a generator set by burning fuel to generate power, providing power for onboard equipment. With the rise of sea routes, ships have become increasingly important, playing a significant role in both passenger and cargo transportation.Physical diagram of ship enginePractical problemsTraditional measurement methods are insufficient to obtain data on ship engine casings, making it impossible to carry out secondary design and product quality inspection.The complex shape, numerous concave convex surfaces, and numerous hole positions of ship engines make scanning work very difficult.Physical diagram of ship engineCo3d solutionEquipment used: handheld 3D scanner model 49Using 34 crossed blue laser lines+14 fine modes+1 deep hole mod...
    • Release Time: 2016 - 07 - 22
      Ship engine detectionAnalysis of full size surface 3D engineers use 3D scanner Huaguang HL-3DW can be generated on a ship engine, a detailed test report, any position deviation can also display the numerical value of.Practical problems1, the ship engine shell size 2m*0.8m*1m, curved surface, assembly position very much, in addition to improve the measurement efficiency, and shorten the measurement time, the measurement accuracy will be well controlled, global measurement accuracy within 0.1mm2, with the traditional measurement method to obtain the ship engine housing data is insufficient, can not be carried out two times the design and product quality inspection.CO3D solutionsIs a leading Foundry Company in large castings industry veteran of the company, the traditional engine measurement ...
    • Release Time: 2020 - 11 - 27
      3D reverse scanning of bathtubWith the vigorous development of the real estate industry, China's sanitary ceramics industry has also achieved rapid development, the original ceramic enterprises continue to integrate, new ceramic enterprises are also emerging. Customers want to obtain the data of bathtub without drawings by 3D scanning, so as to improve the shape and function of bathtub.Field scanPractical problemBathtub overall area is big, concave surface is wide and deep, scanning is easy to consume time. Customers require high precision, data can be used in the later work, improve the quality of products. Because the bathtub needs to be installed and connected with parts, it is necessary to avoid errors in assembly. High precision and high efficiency 3D scanner is needed for scannin...
    • Release Time: 2016 - 09 - 10
      Large canoe reverse scan modelKayak models up to four meters, scanning the difficulty coefficient is big. Through the analysis of 3D Technology Engineer Huaguang scanning, 3D scanner using HL-3DW technology, 3D data can only get forty minutes time kayaking model, the accuracy of the 0.1mm.Practical problems1, the traditional method of measuring data acquisition density is not enough (data deficient) and the surface model and the radian of canoeing can not be measured, unable to detect late nor reverse mapping.2, kayak model 4.0m long, general 3D scanner scanning format is small, large objects when the cumulative scanning area too much, can not find and so on logo stitching. Generate a large amount of work, low efficiency, and the accuracy of the data can not reach the customer demand.CO3DS...
  • Electronic appliance
    • Release Time: 2024 - 05 - 18
      As a modern kitchen appliance, household dishwashers have gradually entered thousands of households. Not only does it solve the problem of washing dishes at home, but it also improves the quality of life. The structural design of a dishwasher includes interior design, sprinkler system design, water circulation system design, electrical control system design, etc. The inner cavity has good corrosion resistance and durability, and the main materials are stainless steel and ABS resin.On site physical image of dishwasher chamberA well-known manufacturer wants to use 3D scanning for 3D scanning and reverse modeling. The workpiece has high reflectivity and uneven internal shape, with various grooves and numerous hole positions. The customer needs to accurately measure the hole positions of the w...
    • Release Time: 2023 - 10 - 11
      A well-known washing machine manufacturer needs to conduct a three-dimensional inspection of the washing machine control panel.Practical problemsThe control panel of the washing machine has multiple operation buttons, and there are many hole positions on the surface of the buttons. Customers need to detect the hole size of the workpiece. Traditional measurement methods cannot fully obtain surface data, and the control panel needs to be matched with internal parts, requiring high accuracy in obtaining three-dimensional data.Co3d solutionAccording to customer requirements, Hualang 3D technical engineers use a handheld scanner HOLON B71 to perform 3D data scanning on the control panel, real-time visualization scanning, synchronous data generation, multi line laser data acquisition, with a spe...
    • Release Time: 2023 - 09 - 28
      VR glasses are a product that combines simulation technology, computer graphics, human-machine interface technology, multimedia technology, sensing technology, network technology, and other technologies. They are a brand new human-machine interaction method created with the help of computers and the latest sensor technology. Practical problems    Customers need to scan and reverse model VR glasses, which requires high scanning accuracy. The shape of the workpiece is complex, with different contour shapes on each surface and many curved surfaces. The use of traditional measurement methods is very cumbersome and time-consuming. And it is not easy to accurately and quickly measure and detect the structural appearance data of VR glasses.Co3d solutionBased on the issues and scann...
    • Release Time: 2023 - 08 - 23
      Parts are the basic components assembled into machines, instruments, and various equipment. Belonging to small and fragmented objects. The customer needs to digitize the parts (data collection, data processing) to further achieve analysis and reverse design.Product physical image Practical problems    The overall volume of the workpiece is small, with a diameter of only 4cm. The surface is irregular with many details, and the surface is black. According to customer requirements, the scanning accuracy is high, and the data is complete. Using traditional scanning methods, it is difficult to achieve complete data acquisition.Scan on-site images Co3d solution    For precision small parts, Hualang 3D engineers use a handheld 3D scanner HOLON A22 for comprehensive s...
    • Release Time: 2023 - 05 - 13
      Nuclear magnetic resonance instrument shell scanningAt present, most hospitals rely on imported nuclear magnetic resonance imaging (MRI) instruments, and the manufacturing of precision instruments has become a difficult pain point to overcome in terms of high-precision requirements. Equipment manufacturers need a high-precision detection method to conduct three-dimensional scanning of the shell sample in order to pursue higher accuracy in the manufacturing process of the shell.Practical problemPrecise instruments and equipment require higher precision. Hualang handheld 3D scanner uses its self height precision scanning to meet customer needs.Physical image of the shell of the nuclear magnetic resonance instrumentPhysical image of the shell of the nuclear magnetic resonance instrumentSoluti...
  • Mould testing
    • Release Time: 2023 - 10 - 31
      Car glass is an essential part of car body accessories, mainly playing a protective role. A well-known automotive parts production company hopes to obtain the contour of the glass for subsequent quality testing.Physical image of car glassPractical problems  It is necessary to quickly obtain three-dimensional data and contour of glass. The glass itself has a special material, and the surface color is transparent and curved. Traditional measurement methods are not accurate enough to meet the detection requirements.Physical image of car glassCo3d solution  Spray imaging agent to improve the contrast of the substrate on the sample surface and obtain better scanning data. Hualang engineers use a 3D handheld 3D laser scanner HOLON B71 for automotive glass inspection, with a scanning sp...
    • Release Time: 2023 - 07 - 26
      China is in a period of accelerated industrialization, marketization, and urbanization, as well as a period of consumption expansion and structural upgrading. The equipment manufacturing industry will face rare development opportunities, providing huge market space for the development of gears.Gear physical image面临问题| Practical problemsThe customer needs to measure the surface profile of the gear and the surface profile of all gears, whether the diameter of the holes on both sides is the same, as well as the deviation between coaxiality and clamping groove. The shape is complex and irregular, and the grooves on each side are different with many dead angle holes. There are many 3D dimensions that need to be measured. The use of traditional measurement methods is very cumbersome, time-consum...
    • Release Time: 2023 - 07 - 06
      Inspection tools are simple and convenient tools used by industrial production enterprises to control various sizes of products, improve production efficiency and control quality. They are suitable for large-scale production of products. Due to the certain loss of molds caused by long-term use, it is necessary to test whether the products are still within the qualified range of useProduct physical image Practical problems    Customers have high requirements for the accuracy of detection data, with small scanning errors, fast speed, and the ability to efficiently complete work. The mold has a large volume and is not easy to move. There are many uneven details on the surface, and the convenience of the contact measurement method is not high. Scan on-site imagessolution...
    • Release Time: 2023 - 06 - 13
      The mold industry, as the foundation of industrial manufacturing production, has become a major indicator of the level of manufacturing industry based on its production technology and level. A well-known mold manufacturing enterprise in Tianjin needs to measure a large mold (2m long and 1.4m wide), and test the flatness, hole center distance, hinge position, and other data on the surface of the mold after production and processing Physical drawing of the moldPracical problems1. Due to the large volume, heavy weight, and complex shape of the mold, customers require fast work efficiency to accelerate the process of work. And there are strict requirements for the scanned data, with accurate data analysis, small errors, and high accuracy.2. Simply using traditional methods to measure diff...
    • Release Time: 2023 - 04 - 24
      3D scanning of sand castingsSteel, iron, and most non-ferrous alloy castings can be obtained by sand casting method. Due to the low cost and easy availability of molding materials used in sand casting, the mold manufacturing is simple, and can adapt to single piece production, batch production, and mass production of castings. For a long time, it has been a basic process in casting production.Physical Drawing of Sand CastingPracical problemsIn order to ensure that the sand mold and core produced have a certain strength and do not deform or damage during transportation, molding, and pouring of liquid metal, it is generally necessary to add sand binder in the casting to bond the loose sand particles into sand. It is very difficult to detect using traditional techniques.Physical Drawing of Sa...
  • Educational equipment
    • Release Time: 2023 - 06 - 28
      Sculpture art is a means of awakening humanity's yearning for beautiful things and triggering thinking. Character sculpture is the most popular art that can display a social and cultural atmosphere. Sculpture art contains the author's ideas that resonate through visual appreciation to achieve the function of propaganda and decoration. Through the author's knife and chisel, you can imagine the era it lived in and 'listen' to it tell the past and history. In a park in Shenzhen, there are many famous sculptures from ancient and modern times, both at home and abroad.On site physical imagePracical problemsThe customer wants to obtain the 3D display data map through the 3D scanner. By using 3D printing technology, lay the foundation for subsequent display and reproduction. Du...
    • Release Time: 2023 - 04 - 24
      Reverse design of pure copper ornamentsCopper handicraft ornaments may seem very simple, but in fact, the production process of modern copper handicraft ornaments is not just a simple process of assembly and stacking, but requires professional casting technology and precision craftsmanship.Behind a series of complex processes of pure copper handicraft ornaments, it has brought some difficulties to the early model development and finished product transformation. The traditional development and reverse process is complex and takes a long time. In order to pursue a simple and convenient reverse process, manufacturers decided to use Hualang handheld 3D scanner to conduct 3D measurement of pure copper ornaments.Scanning physical image of pure copper ornamentsPracical problemsReflective material...
    • Release Time: 2022 - 08 - 18
      Three dimensional scanning of acupuncture bronze figureAcupuncture bronze man is a model of human meridians and acupoints invented by ancient Chinese physicians for acupuncture and teaching. Acupuncture bronze man plays an important role in the history of Chinese medicine. The whole body of the bronze man is cast from bronze. In order to accurately restore the positions of the meridians and acupoints of the bronze man, modern three-dimensional measurement technology has created a perfect continuation of the essence of ancient Chinese medicine.针灸铜人实物图Pracical problems1. The whole body of the bronze man is cast from bronze, and the surface is reflective. The customer requires that the developer cannot be sprayed;2. There are many meridian and degree details on the bronze man. The customer re...
    • Release Time: 2020 - 04 - 16
      Hard hat reverse designA hard hat refers to a hat that protects a person's head from damage caused by falling objects and other specific factors, and is composed of a shell, a cap lining, a chin strap, and accessories. Each helmet has certain technical performance and scope of application. As a safety protection, it has great requirements on the quality of the materials used and the rationality of the design. Manufacturers require scanning helmets to do reverse modeling and make corresponding changes to design improvements.Hard hat scanning scenePractical problemsThe helmet shell has a large radian and holes around it. It is not accurate enough to obtain data using traditional scanning methods. It is impossible to perform a complete measurement of the curvature of the surface, so it ca...
    • Release Time: 2020 - 01 - 10
      3D scan of Venus sculptureVenus sculpture is an art treasure, carved by hand with a knife. Carving sculptures by hand is a long and large amount of work, and it is difficult to control the accuracy of details. Therefore, it is difficult to rely on hand carving for mass production. The 3D scanning technology can be used to open the mold to make it meet the needs of the public. This can not only speed up production efficiency, but also save labor costs, and it has high accuracy.Venus live shotPractical problemsThe surface texture of Venus sculpture is remarkable. It is a humanoid sculpture with obvious features and pleats. Both the posture and the posture have the power of God. Customers need to have a high degree of restoration and high scanning accuracy, which meets the needs of the market...
  • Automobile traffic
    • Release Time: 2016 - 08 - 10
      By a well-known car company commissioned to scan the vehicle's three-dimensional data, optimize the performance of the car. In the understanding of the actual situation, Hualang 3D technology engineers use 3D Photogrammetry System HL-3DP + 3D scanner HL-3DW, quick access to car body and wheel arch data, optimization of drag racing.The use of traditional methods not only spend a lot of time and huge investment, can not meet the actual requirements of the team. D according to the problems faced by the team, the proposed solution used in the solution: three-dimensional Photogrammetry System (HL-3DP) + 3D scanner (HL-3DW) to obtain the car body and wheel arch data. The car gets out of the car after the appearance of manufacturing data model wind tunnel experiment, test the drag coefficient...
    • Release Time: 2016 - 08 - 22
      HuaGuang 3D The advantages of the solutionReverse engineering requires the acquisition of components with a variety of shapes and complexity, and may be required to be measured in any type of environment. Due to its excellent portability, 3D HuaGuang can be collected directly in the design studio, can also be collected at the customer site, such as production sites (even in small car body shop).Since the designer wants to rebuild the functional design of the parts, the collection must be accurate and can provide all the information necessary to rebuild the new reference model for the parts to be manufactured. 3D HuaGuang will provide a complete and accurate mesh model.Compared with the traditional measurement methods, 3D HuaGuang solution can help save a lot of time. The necessary reverse ...
    • Release Time: 2016 - 09 - 09
      HuaGuang 3D The advantages of the solution  A prototype of the automotive industry in the detection of collection of a variety of appearances and the complexity of the size of the components, and may need to be measured in any type of environment. Due to its excellent portability, 3D HuaGuang can be implemented in the metrology laboratory collection, can also be in the customer's work site (for example, the production site or supplier) for collection.The inspectors wish to use digital model to assess the actual component, so the acquisition must be accurate and complete 3D model must include all the information needed to detect. 3D HuaGuang will provide a complete and accurate mesh modelCompared with the traditional measurement methods, 3D HuaGuang solution can help save a lot of time....
  • Aerospace
    • Release Time: 2016 - 08 - 15
      Rapid measurement, the overall size of the detection time of large workpieces such as aircraft tail in 1 hours, time measuring parts of small workpieces such as aircraft or even less than 15 minutes; in view of the quality of aviation products extremely demanding and the shape size and surface complexity are not the same, the 3D scanning system can detect aircraft parts. First scan of the parts, due to the use of non-contact scanning for complex curved surface parts soft and easily broken, unable to reach parts of the probe can easily scan, reduce the scan time of the workpiece to complete, compared with the CAD model, the color encoding error chart shows the deviation and deviation, CAD data is given for correction.All parts of the production line need to be verified by 3D, which can be r...
    • Release Time: 2016 - 08 - 12
      Thrust - before the aircraft began to move, the thrust must be applied. The aircraft continues to move, the speed increases until the thrust and resistance are equal. In order to maintain a constant airspeed, like lift and gravity must be equal in order to maintain a stable flight altitude, thrust and resistance must be equal. Assuming that in the straight flight, the engine power is reduced, the thrust will fall, the aircraft speed will slow down. As long as the aircraft would have been less than thrust resistance, slow down, know that it is not enough to support the flight airspeed. 1.Mold / model 3D scanA preliminary air flow analysis for the following types of components to the CFD model:A. wingB. bodyC. hoodD. exhaust mixerE. external storage tankF. through the CAD application to...
    • Release Time: 2016 - 08 - 15
      The use of aircraft to scan data can be compared to the damage after the body, more intuitive to see the site of injury, can provide the most reasonable direct repair scheme of aircraft damage, improve the safety of the aircraft, can also evaluate the quality of the repaired parts, whether can give accurate judgment to take off again. Aircraft maintenance can also through comparison, more intuitive to see the deformation or displacement of parts, these parts previously indistinguishable to the naked eye easily scan out of repair, make the detection process more complete. Data can also be stored in a permanent document, to provide a more solid theoretical basis for the subsequent repeated repairs.A. damage assessmentB. for the renovation of part of the consistency assessment to modify the m...
  • Heavy equipment manufacturing
    • Release Time: 2016 - 08 - 13
      HuaGuang 3D The advantages of the solution  Detection of castings and forgings requires the acquisition of various shapes and sizes of the components of the complex, the acquisition process may be performed in any type of environment. With its excellent portability and multi functionality, 3D HuaGuang can be directly in the foundry, the customer's housing, production sites or suppliers to perform any part of the collection.Quality inspection personnel or operating personnel usually need to use the corresponding digital models of physical components to assess their. Therefore, the collected data must be accurate, and the 3D model must contain all the information needed to complete the test.3D HuaGuang will provide a complete and accurate mesh model. Compared with the traditional measure...
    • Release Time: 2016 - 08 - 13
      Because all of our proprietary products are based on the foreign advanced technology, whether to scan vehicles or parts size, regardless of whether there is around the dirt, dust, wind, temperature or other extreme conditions, can provide reliable and highly accurate measurement data.Before designing an agricultural, construction or mining equipment spare parts, the designer must extract the dimensions of the vehicle or equipment. In order to ensure good coordination and performance, the dimensions must be accurate and complete.
    • Release Time: 2016 - 08 - 13
      HuaGuang 3D The advantages of the solutionDetection of castings and forgings requires the acquisition of various shapes and sizes of the components of the complex, the acquisition process may be performed in any type of environment. With its excellent portability and multi functionality, 3D HuaGuang can be directly in the foundry, the customer's housing, production sites or suppliers to perform any part of the collection.Quality inspection personnel or operating personnel usually need to use the corresponding digital models of physical components to assess their. Therefore, the collected data must be accurate, and the 3D model must contain all the information needed to complete the test.3D HuaGuang will provide a complete and accurate mesh model. Compared with the traditional measureme...
  • New energy
    • Release Time: 2016 - 09 - 09
      Turbine component analysis  HuaGuang 3D The advantages of the solution  Turbine component analysis may require the acquisition of arbitrary shape and complexity of the parts in an unstable environment. In addition, parts are usually located in the hard to reach position. Due to its excellent portability, compact size and built in the parts of the coordinate system function, even if you need to scan directly in the spiral case, 3D HuaGuang can also be directly on the turbine device to perform the collection.Because the quality of the turbine components is critical to a good working condition, the acquisition must be accurate and include all the information needed to assess the status or to create a complete 3D dimensional model. 3D HuaGuang scanner is an ideal equipment to provide a complet...
    • Release Time: 2016 - 08 - 12
      Whether it is the reverse process, detection, repair or transformation of power generation components, 3D HuaGuang to provide reliable, advanced portable 3D measurement technology for the power market. Small spaces and difficult to access components are no longer a problem, because of its well-known portability and small size makes them available in any place to collect measurement data. Our data accuracy is among the best in the market, while TRUaccuracy technology ensures the stability of the measurement setup, so that the device can be measured in an unstable environment
    • Release Time: 2019 - 05 - 17
      Huaguang 3-D is based on the frontier of industrial 3-D measurement technology. It devotes itself to the 3-D digital manufacturing of industrial products. It develops and manufactures photographic 3-D scanners, hand-held 3-D laser scanners, 3-D photogrammetry systems and 3-D motion capture systems. Main applications: reverse engineering, three-dimensional detection, three-dimensional printing and product three-dimensional digitization and other fields.Huaguang 3D brings you:Scanning data integrity (large-scale comprehensive scanning, accurate acquisition of complete three-dimensional data)Because the scanned workpiece in energy equipment is often large and difficult to move. It is difficult to obtain complete and accurate data by using traditional measurement methods.Three-dimensional scan...
    • Release Time: 2016 - 08 - 12
      We selected material and process design, wind turbine blades, are the main factors determining the wind power device performance and power, affect the unit cost of wind power generation, in order to improve the efficiency and reduce the cost of the fan two factors, making positive development of large leaves. Generally speaking, wind blade length of a few meters, or even tens of meters, so large in size, with little or no previous measuring equipment suitable for 3D measurement can be performed on it, that is to use laser total station 3D measurement, 3D data also just get the key points, slow measurement speed and low accuracy.1 scanning data integrity (large scale comprehensive scanning, accurate access to complete three-dimensional data)The workpiece is often large and difficult to move...
  • Ship engineering
    • Release Time: 2016 - 09 - 10
      Ship engineering is the concentrated embodiment of the advanced manufacturing technology. Measurement, whether it is for the mapping of components, or parts of the test, does not allow any error, the measurement of the requirements can be used to describe the harsh. In the process of manufacturing, weight loss and safety is the ultimate goal of two, the requirements continue to optimize the component design and material performance, so lightweight, integrated.Ship engineering domain detection of parts of the past more than the use of contact, such as the three coordinate measuring machine, special measuring tools, the use of the method of measuring parts of the surface shape. The efficiency of this method is not high, it is affected by human factors, and it is easy to go wrong, there are s...
    • Release Time: 2016 - 08 - 15
      Ship and ocean engineering structures, the design and development of submersible underwater, the main research areas are: Marine Engineering and other kinds of structural strength, stiffness, fatigue, vibration and structural reliability; marine hydrodynamics; ship resistance, propulsion, stability, maneuverability and seakeeping. Some of the research achievements in China have reached the international level. Marine engineering is mainly research on the principle of ship machinery and application, with the continuous development of information technology, the application of radar and remote sensing technology, improve environmental protection requirements and more efficient use of energy, power equipment, electrical equipment, ship engine automation systems are facing new challenges and t...
  • 师资队伍
    • Release Time: 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国,英国,加拿大,澳洲,新西兰)·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证知名师范院校外语系师范专业毕业,毕业以来就一直从事小学、初中的教学和研究工作,6年的任教经验,特别是一年国际学校任教的经历,让我对中、外的小学生的语言学习有了更多的认识;在我的课堂中,学生的兴趣始终是我关注的出发点; 另外,语言不仅是一门语言,同时也是一种文化;更难得是的思维习惯的养成;我喜欢活跃互动的课堂形式,有趣的课堂形式利于提高学生的学习积极性,同时我也很喜欢教授学生掌握解题的关键,各类口诀梳理语法重难点是掌握的捷径!
    • Release Time: 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国,英国,加拿大,澳洲,新西兰)·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证        Hello,我是LINDA,毕业于广州著名学府的英语教育专业,擅长地道的口语教学,多年的口语教学经验告诉我,口语学习必须要大胆开口说,英语是一种语言,重要的是懂得如何交流和沟通。流利的口语更可以提高语感,有助于更容易学习英语。我喜欢活跃互动的课堂形式,有趣的课堂形式利于提高学生的学习积极性,帮助你找到适合自己的英语学习方法、掌握解题的关键,独特而有个性的教学风格是我的课堂。
    • Release Time: 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国,英国,加拿大,澳洲,新西兰)·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证最受学生欢迎的英语女神。 教学成绩:2013年获评明师教育最受学生喜爱女教师金奖; 2014年班均人数、带班量居英语科头名,并创下英语科目班均人数最多纪录; 曾参加高考口语,一模口语评卷工作,英语口语界权威代表。 教学特点:10年丰富的教学经验,执教高三保证班超过6年。自创语法填空(Grammar)稳夺8空技巧,小作文首句法,20分钟高分大作文速成法,助你挑战速度极限。2013年以来Sammi所带的班期期爆棚,人数居高不下,被学生奉为英语女神。
    • Release Time: 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国,英国,加拿大,澳洲,新西兰)·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证        拥有全国认可的英语专业最高等级证书---TEM-8,极具英语权威。刻苦钻研Task-based Language Teaching(TBLT)教学法,熟练掌握Reading, Speaking, Listening, Writing课堂教学技能,在教坛凭借新颖教学方法,获得家长和学生一致好评,获得“最佳教师奖”。 “3P”魅力(Professional, Passionate, Patient)专业+热情+耐心=100% 魅力 Rachel执教的英语课堂生动有趣
    • Release Time: 2014 - 10 - 28
      ·本科及本科以上学历·英语为母语(来自美国,英国,加拿大,澳洲,新西兰)·有教学经验及商务背景·外籍专家证 Foreign Expert Certificate·有国际认可教师资格证经验丰富·考点明确:Sarah具有丰富的教学经验,长期担任明师初中英语教材组成员,负责各大名校试卷分析工作,熟知初中各年级英语考点,提炼各类“易错题”、“高频题”;善于归纳解题方法和构建、整理知识结构体系;同时擅长针对考试题型演示解题方法,炮制最适合学生的“抢分秘笈”。 幽默课堂·轻松学习:Sarah以独特的“栋笃笑”风格,打造具有个人特色的幽默课堂,为学生们提供轻松、愉悦的学习环境。对于初中英语较难的知识点,Sarah善于以生动有趣的例子诠释,加速学生的理解及记忆。
  • 下载中心
    • Release Time: 2013 - 12 - 02
      电器企业将转战三、四级市场家器产品的销售主要集中在城市一、二级市场,三、四级市场潜在需求还没充分挖掘。一、二级市场竞争激烈,必然伴随着运营成本的提高,缩小了利润空间。而在稳定发展的经济大环境下,消费水平和消费能力的日渐形成,三、四级市场会日渐启动。电器企业必将加速转战三、四级市场的步伐。产品的系列化、渠道的多样化、人员的素质化、营销的战略化是企业全面攻占新市场必不可少的战略武器。电器企业必须不断地增强多元化的综合竞争力。
    • Release Time: 2013 - 12 - 02
      LED车载屏是安装在车上的,使用专用电源供电,通过控制卡接收、输出数据给点阵LED单元板,通过控制点阵的亮灭显示文字、图片、动画、视频的设备。一般有出租车、公交车、警车安装LED车载屏。它是随着LED显示屏的迅速发展而独立出来的一套LED车载显示系统,与普通的门头屏、固定不移动的LED显示屏相比,它对稳定性、抗干扰性、防震动、防尘等方面的要求更高。迅灵车载屏在各个方面都有严格的把控、对产品的要求更高。
Top

The seventeenth Shenzhen International Machinery Manufacturing Industry Exhibition

Publisher: 英迈思
Release Time: 2016-04-07

2016/3/29-2016/4/1 for a period of 4 days of the seventeenth Shenzhen International Machinery Manufacturing Industry Exhibition (SIMM) held in Shenzhen Exhibition Center, the exhibition in Shenzhen Exhibition Center all 9 exhibition halls, the total size of 110 thousand square meters, set the metal cutting machine tool exhibition, exhibition area, sheet metal machine forging die casting machine exhibition, special steel and materials exhibition, and die metal products exhibition, measurement and equipment, 3D printing and software exhibition, exhibition, robot motion control and drive application and non-standard automation tools and tool exhibition, exhibition and other 9 large area. Attracted from Germany, Japan, the United States, South Korea, Switzerland, Sweden, the United Kingdom, Spain and other countries and regions of the world a dozen countries and regions of the equipment manufacturing giant. With the "4 industry" as the representative of the revolutionary raging like a storm, manufacturing production has true intelligence, is the biggest highlight of the Shenzhen machinery exhibition.

 

The seventeenth Shenzhen International Machinery Manufacturing Industry Exhibition

Huaguang three-dimensional (CO3D) booth map


Measuring Instrument Exhibition in hall sixth, in addition to hexagon and Cai Si, Si Rui international well-known brands, the domestic instrument industry exhibitors increased significantly compared to previous years, we can see some more and more in recent years known as optical measurement equipment at the same time, such as 3D scanner. Three dimensional scanner is a high technology, which integrates light, machine, electricity and computer technology. It is mainly used to scan the shape and structure of the object space to obtain the space coordinates of the object's surface. Its important significance lies in that it can convert the solid information into the digital signal which is directly processed by the computing performance, which provides a very convenient and quick means for the digital object digitization.

 

The seventeenth Shenzhen International Machinery Manufacturing Industry Exhibition

Exhibition slogan display

 

Our work in Shenzhen Institute of Metrology and quality inspection organized inspection shows the geometric scheme based on product life cycle, for visitors showing the route and scheme of industrial 4, and we discuss the design of precision, accurate measurement and precise control of the road, our business staff and technical personnel, sent to AC for the purpose of technology, participated in the exhibition. The exhibition, we show a hand-held laser 3D scanner, camera 3D scanner and other measurement systems. Our products can be widely used in large forgings, auto parts, casting parts, electrical and electronic components and other industrial products, such as reverse engineering and three-dimensional detection.

 

The seventeenth Shenzhen International Machinery Manufacturing Industry Exhibition

Interior scene of the show

 

During the exhibition, the industry personnel visit our 3D scanner device, listened to our new product development and made substantive case, technical engineers on-site demonstration of 3D scanning, the industry personnel of our position in the industry, said that the technical strength and achievements. Our camera 3D scanner at first, the fourth generation of German synchronous heterodyne multiple frequency phase shift grating technology, can improve the quality of scanning point cloud, equipment can be multi angle, large area scanning; at the same time, is the first generation domestic invention Huaguang three-dimensional hand-held scanner, the first domestic industrial grade handheld laser scanner manufacturers.

 

The seventeenth Shenzhen International Machinery Manufacturing Industry Exhibition

Exhibition overall display

 

This machinery exhibition focuses on high-end manufacturing at home and abroad, in which the national intelligent manufacturing pilot demonstration projects are particularly eye-catching. This exhibition reflects the current development trend of China's equipment manufacturing industry, has become the focus of China's manufacturing 2025 "vane" and intelligent manufacturing leading platform.

 

News / Products News More
2024 - 05 - 18
点击次数: 0
Lijia International Intelligent Equipment Exhibition, founded in 2000, is one of the largest intelligent manufacturing equipment exhibitions in China. It will be held from May 13th to 16th, 2024 at the Chongqing International Expo Center. Hualang 3D will carry high-precision 3D scanners and automated 3D measurement systems with a heavy weight.The 24th Lijia International Equipment Exhibition in 20...
2024 - 05 - 13
点击次数: 0
The highly anticipated "2024 10th TCT Asia Exhibition" will be grandly held for three consecutive days (May 7-9) at the National Convention and Exhibition Center (Shanghai) Halls 7.1&8.1. The scale of the exhibition is unprecedented! The total exhibition area reaches 40000 square meters, from 80 exhibitors who first landed in Shanghai in 2015 to a historic increase of 400 exhibitors ...
2024 - 05 - 13
点击次数: 0
The 20th Tianjin Industrial Expo, which lasted for 4 days from April 6th to March 9th, 2023, came to a successful conclusion. Hualang 3D made another perfect debut, and this exhibition also brought more new equipment and technologies. We demonstrated to customers at the exhibition site and achieved good feedback, providing new solutions in measurement, reverse engineering, and other application di...
2024 - 05 - 13
点击次数: 0
The Western Expo is based in Shaanxi and radiates the vast market in the western region. It is an important node and bridge between the domestic and foreign industrial chains and the western market of China, and has created a "golden signboard" in industrial equipment exhibitions in the western region. In recent years, each expo has attracted nearly a thousand well-known domestic and for...
Close Window】【Print
深圳市华朗科技有限公司 Tianjin City Economic and Technological Development Zone, Fourth Street 80, Tianda Science & Technology Park South 3 layer Mailbox:co3d@co3d.com Telephone:022-5900-2803 Fax:022-5900-2805 Zip code:300457
  • Two-dimensional code name
    Two-dimensional code name
    Two-dimensional code name
Copyright ©2005 - 2013 Huaguang 3D (Tianjin) Technology Co. Ltd.
犀牛云提供企业云服务
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 4006-971-972
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开
Top