Product technology introduction
With the advent of the handheld 3D scanner HOLON760, the 7-line (blue, red) crossover laser of the handheld 3D scanner has been fully launched.
The 7-line (blue, red) crossover laser consists of 2 sets of 7-line lasers and 1 set of (5-wire) single-line laser modules. It is protected by an alloy casing and has high seismic performance, high stability, strong anti-interference and long service life. Features.
7-line/single (5) line (blue, red) laser features
1. Can project 7 sets of cross laser lines or single (5) laser lines. It has the characteristics of fast release speed, high collimation and clear lines.
2. There is no light decay phenomenon when working continuously for a long time;
3. The professionally designed optical system guarantees a super strong line effect;
4. Good seismic performance, perfect for mobile handheld 3D laser scanners;
5. Easy to install, use special laser regulated power supply design, power can be used.
7-line (blue, red) laser line effect diagram
When two multi-line lasers (A and B) are placed at an angle of 60 degrees, the resulting pattern is as shown below:
Laser crossover effect
2. When a single laser (A and B) is placed horizontally, the laser line is illuminated as follows:
7-line (blue, red) cross laser technical parameters
| Product number | 7-line（blue，red）crossed laser
|
| Laser wavelength (blue/red) | 450nm / 650nm |
| Power (single) | 20 - 100mw |
| Working distance | 200 - 450mm (the closest working distance is 300mm) |
| Number of lines (single) | 7 lines, parallel |
| Angle (laser line length direction) | 55 - 60° |
| Laser line | The line width of a single laser line is about 0.1mm. Line width uniformity ≥90% |
| Laser line distance | 300mm working distance is 10-20mm line spacing |
| Operating Voltage | DC5V |
| Laser size | The laser size does not exceed φ12-15*40-50mm, the overall size can be customized, three-in-one shell |
| Electrical requirements | Provide TTL level interface, adjust the laser intensity by using TTP space ratio; drive circuit customization |
Demand feedback
Customers can make service requests to the company through effective communication methods such as telephone and mail. We will respond within 2 hours and propose solutions within 24 hours.
Equipment Repair
Our company responded to customer questions in the first time after receiving the product failure notice. After the effective communication methods such as telephone and mail can not rule out the equipment failure, and the problem is determined as the cause of the equipment, our company will assign technical personnel to the site for maintenance.
Huaguang 3D (Tianjin) Technology Co., Ltd.
Tel: 86-022-59002803 59002807 59002817 59002805
Fax: 86-022-59002805
Mobile: 17720035950
Address: 3rd Floor, South Building, Tianda Science and Technology Park, No. 80, Fourth Avenue, Tianjin Economic and Technological Development Zone